All Parts have been sold. Thanks everyone for the inquiries.

For Sale Numerous parts for a 60-66 Chevy Fleetside (Longbed) Pickup

I started on a ground up restoration about 6 or 7 years ago and could not finish because of time limitations as well as moving a couple of times. I got as far as tearing the truck completely down, sandblasting and powder coating the chassis and ordering a long list of NEW parts from places like Brothers Obsolete, Santa Fe, etc…

Space, time and funds are low and I want to see if anyone out there is interested in the parts I have accumulated. If so, I would prefer to make a single sale for the whole lot. The list is long (over 100 different items) so I will just post a general list and if anyone is interested I can email the complete list upon request. Basically I have most everything except Bed, Fenders, Engine and Transmission.
I am located in Tyrone, GA about 20 minutes south of Atlanta off of I-85. Must Pick Up.

Partial list:

Chassis – sand blasted and powder coated Black
Upper & Lower A-Arms - sand blasted and powder coated Black
Inner Fenders - sand blasted and powder coated Black
Motor Mounts - sand blasted and powder coated Black
SS Front Disc brake conversion kit
Universal wiring harness
Suspension parts
Miscellaneous cab parts – floor panels, rocker panels, etc
64 & 66 Owners Manuals, Accessory Listing, & Sales Brochures
Stainless Fuel lines
Brake Hoses
Carpet
Gray 60/40 seat

I also have some of the original parts like Steering wheel, Glove box door, ashtray, aluminum “Custom” cab corners, etc..

The rear axle (w/wheels) is already mounted to the chassis with new shocks and coil springs, the upper and lower A Arms are also mounted to the chassis, the front end has a temporary tow hitch mounted to it with temporary towing lights on the rear.

Over $6000 invested, Asking $1700.00 or make offer.

For more information or to obtain a complete list of parts send me an email or PM. I have not taken any pics but will do so upon request, most of the parts are in boxes. Serious inquiries only please.

No reasonable offers will be refused. Just ask you might be suprised.

How much for the ss front brake conversion kit? and will you ship Thanks.

I would be interested in the carpet if it is for the low hump and in black or blue. Do you have any other new parts not listed? Chuck

Myride,

I will get back with you next week about the SS Disc Brake Kit. I paid $899.95 + s/h and I will probably be asking a little less than half that + shipping if I sell it separately. All the parts are packed up in boxes so I will have to find the particular boxes that are part of the kit to see what the weight is for shipping. I will provide pics once I unpack the boxes. The kit was originally shipped in 3-5 separate boxes.

Let me know if you are interested.

Rick

how much on the floor pans and rockers?

I also am interested in the ss brake kit and suspension parts let me know if they are still for sale JOHN

Do you have any e-brake cable system parts?

I may be interested in some of the literature as well.

I'm guessing you are in the Tyrone, GA that is in Fayette county?

-W

Sounds good let me no. thanks

My preference is to sell the whole lot as one sale, so I will wait a week or two before I start selling individual parts. This stuff is taking up a lot of needed space and I really need to get rid of it as soon as possible. My business recently lost a major contract that causes me to drastically downsize and operate from my home, I will need space to put furniture and equipment Jan 31, 2005


BTW I made a mistake on the first post about the Front Disc brake kit, it is not SS. The brake line kit is SS.


PM or email me an offer for the entire list.

So far no offers on the whole shabang so I'll put this out there for a few days.

$1100 for everything listed, MUST PICK UP, take one take all...

Here's the complete list:

NEW PARTS:
Rear Coil Springs (mounted on chassis)
Front End Coils
Tie Rods
Pittman Arms
Brake Shoes
Gas Ryder Shocks (rears mounted on chassis)
How To Paint Your Truck Book
Book - 555 Restoration, Performance, & Maint Tips
Lower A-Arm Bumper
Inner Fender Seals - Sponge
Carpet Kit - Black
SS Disc/Drum Brake Line Set
6 Lug Disc Brake Conversion Kit - Complete With Booster & All Parts
Cab Front Floor Section
Front Fender Bolts
Fender To Cab Seals
Fender Welting-Black
Firewall Cover W/Jute Back
Glove Box Insert
Gas Filler Neck Grommet
Gas Filler Hose - 6"
Hood Brace Pad Set
Wiring Clips - 10pcs
Wiring Harness Straps
Hood-To-Cowl Seal
Hood-To-Radiator Seal Set
Inner Fender Mount Grommet
Interior Screw Set
Disc/Drum Power Booster
Interior Kick Panels
Heat Resistant Padding
Speedometer Cable-Steel
Rubber Bumper Kit
Rocker Panel - Left
Rear Spring Retainer Cup (mounted on chassis)
Rear Window Seal-Sm-Blk
Glove Box Screw Set
Small Item Attatchment Set
Voltage Reg Mount Grommet
Windshield Seal-Std
RR Control/Trailing Arm Bushing (mounted on chassis)
Rear Axle Control Arm Bolt (mounted on chassis)
Rear Axle Tie Rod Bushing (mounted on chassis)
Lower Control Arm Bumper
Upper Control Arm Bumper
Fender Braces
60-66 Chasis Sand Blasted & Powder Coated
Motor Mounts
Inner Fenders
A-Arms Upper Sand Blasted & Powder Coated
A-Arms Lower Sand Blasted & Powder Coated
60-72 Cab Windlace Black Foam Type Matl As Orig
60-66 Cab Mount Kit-1/2 Ton 2wd
55-72 Door Hinge Pin W/ 2 Brass Bushings
Door Weather Seal Adhesive Quality 3m Special Glue
Steering Mast Bearing Lower
60-66 Rear Hood To Body Seal
Front Lower Splash Pan To Radiator Seal
60-66 Hood Brace Sponge Seals
64-66 Front Fender Seal At Firewall
60-66 Inner Fender Seal At Firewall
64 Owners Manual
66 Owners Manual
64 Accessory Listing
66 Accessory Listing
60-66 Factory Assembly Manual
1964 Chevrolet Sales Brochure
1966 Chevrolet Sales Brochure
37-72 Steering Sector Seal & 2 Bushings
60-66 Steering Box Overhaul Kit-Bushings,Bearings,Etc
60-66 Brake Hose Front-2wd 1/2 3/4 &1ton
63-66 Brake Hose Rear 1/2 Ton W/Coil Springs 115" Wb
60-72 Floor Support-Front 2rqrd Per Truck
60-72 Floor Support-Rear Left 1 Rqrd Per Truck
60-72 Floor Support-Rear Right 1 Rqrd Per Truck
64-66 Floorboard Section-Left-Stamped Mtl
64-66 Floorboard Section-Right-Stamped Mtl
60-66 Inner Rocker Panel-Fits Left Or Right
60-66 Sill Plate Chrome-Fits On Cab Between Door Post (threshold)
55-72 Vertical Division Bar Channel Felt Liner-Glues To Channel
64-66 Window Channel
64-66 Beaded Window Seal-Catwhiskers-Preformed W/Clips Attached
Universal Wiring Harness

Also Included From Original Truck:
64 Cab - Floor and Corners W/Moderate Rust
L&R Doors Some Dents And Moderate Rust But All Parts Present
Glove Box Face
Steering Wheel
Steering Box
66 Speedo Panel
Heater Core
Aluminum "Custom" Panels that mount to Cab rear corners

trying to get ahold of you..............scjkovach@aol.com
or check your PM that has my #
Thanks,
Steve

qksilver has currently has dibs on the complete list, if anything changes I will post updates. Thanks for the interest.

RR

Can we get an update on if you still have any of the parts?

qksilver will be at my house to make the transaction Friday or Saturday. He has already made a 60% deposit on the entire list.

I will update this thread once the transaction has been completed, or if the items will be available again.

RR

All parts have been sold.

I do still have a 64 cab, but it has been stripped of all the interior parts.
Free to anyone that is interested, just send me a PM or email.