Claremore :hiya:

Moore (just south of OKC)

edmond/okc/midwest city

Pocola, just southwest of Fort Smith, AR.

OKC as it says in my profile

Okc baby!

Owasso

lil Kansas

Cameron, just a little farther southwest of Ft. Smith, Ark.

Ardmore , almost 2 texas

Tecumseh, just south of Shawnee.

Fort Gibson here, just east of Muskogee

Salina,OK jus east of Pryor

Hugo

wilson oklahoma beside texas.

Far north Edmond...

Maysville. 45 miles S. of OKC

OKC here

Broken Bow, Southeast corner.

warr acres,bethany,okc area

Guthrie here!!

okc area here

Stillwater, OK

Tracy glad to see you still check in on occasion.... wasnt sure you were still around. There was a "where are they now" thread about members that havent been here in awhile and what they are doing now... someone asked if anyone had seen you... take care bud.

hey man.,...yea, still lurking... :hiya:

Hey everyone, just got notified that the Air Force is sending me to Tinker AFB in OK City. Looking forward to getting back to the states and back to my pickups :metal: So hopefully there will be some get togethers in August/September time frame and meet some fellow board members. Jay

Hey since we're all from Oklahoma here maybe somebody can help me out. Anybody know a good bodyshop in Oklahoma City for some bodywork on a 71 Chevy?

in Tulsa, slowlymaking progress on my truck, almost got my vortec 350 ready

chickasha about 40 minutes from the city down I-44

Norman, from time to time. Next trip in July and August. Normally, I'm from Gastonia, NC
Don

Tulsa here! :metal:

I'm going to be moving to the OKC area this summer. I'm glad to see there's a large rolecall from that area. I hope to meet some of you guys after I get settled.

Hey since we're all from Oklahoma here maybe somebody can help me out. Anybody know a good bodyshop in Oklahoma City for some bodywork on a 71 Chevy?
email me at tfocht@kicker.com

Know of several in Stillwater, and a good one in Winfield, KS, they did my '70...only about 1.5 hours north of here...

welcome to all the newcomers to the okc area... there is a thread in the board meets section about a get together for OKC members... however.. it is still up in the air waiting for someone to take charge, anyone willing to step up?

Midwest City....maybe I should look at some other boards, besides the 73-87 one, from time to time... :D

Hello all
Stillwater OK for me, Tracy Focht do you still have the 69 or 70 maroon and white two tone half ton? I might be of some service to some of you guys. I work for a GM dealer in the pars dept. here is town. You can still find quite a bit of the original stuff sometimes.

Hello all
Stillwater OK for me, Tracy Focht do you still have the 69 or 70 maroon and white two tone half ton? I might be of some service to some of you guys. I work for a GM dealer in the pars dept. here is town. You can still find quite a bit of the original stuff sometimes.
hey, no I sold that to another board member a year or so ago...work for Wilsons??

Any body in this area have a good cab roof or a junk cab they want to get rid of? I don't need a title. I will trade a front disc brake set up from a 78 1/2 ton for it. These will bost right up in place of the drum setup on 67-71. PM me please!

I may still have a cab available. Where are you located and can you pick it up or do you need it delivered? PM me.

Hey everyone, just got notified that the Air Force is sending me to Tinker AFB in OK City. Looking forward to getting back to the states and back to my pickups :metal: So hopefully there will be some get togethers in August/September time frame and meet some fellow board members. Jay

Welcome to Oklahoma. My dad was in the Air Force and we were stationed at Karamursel Turkey back in 69-70. After retirement he eventually ended up at Tinker working for Civil Service. Retired again, now he gets two Fed retirement checks.

When will you be leaving Turkey? May think of something you could bring back for me.

Hey Rick,

Getting paroled from Turkey on the 3rd of August. Going to stop in Arkansas for a couple of weeks and will be getting into Tinker around mid August. Got about 3 more years and I can retire. Looking to get hired on at Tinker once I retire from the AF.

About the only thing they sell around here lately is machine made carpets, suits and leather jackets. The gold used to be cheap here, but with draw down here at Incirlik, the Turks have jacked the price way up. Not many good bargains anymore.

You wouldn't happen to know some good places to live around Tinker would you? Got relatives down in Purcell, but I hear the I-35 is pretty nasty for commuting? Figure I will stay nearer Tinker for the first 6 months. Jay

My parents were living in the Moore area when dad retired from Tinker civil service. I will ask them for ideas. Something that I liked, but don't have any more are puzzle rings - would like to have another one. I also had a guy in Yalova make me leather wrist watch bands, the wider ones that were popular back then. But I haven't wore a watch in about 10 years.

Mom says she likes south OKC. Dad said Del City or Midwest City is close.

The I-35 commute is starting to get pretty nasty. Tinker is on the SE side of the town so if you're looking to get something around there then that would be your best bet. Like they said Del City and MidWest City are the closest, although OKC does wrap into there but they still call them DEL and MID city if you kinda understand that. If you're going to buy me a house and would like the name of a couple good realtors let me know as I could give you either the guy I bought my house through or one of my Marine Reservists is a realtor for Century 21 and does a pretty $hit hot job from the sounds of things. That and if you're anticipating buying a house with a basement might as well keep on dreaming as they don't exist in this area. i myself live about a mile from the west side of Tinker and I bought a 1700 SQ ft 3 Bdrm 2 bath pretty nice house for 84,500. If you would like theither one of those realtors names or numbers just let me know and i'll hook you up man. That and if you got any other questions about the Tinker area feel free to PM me. Good luck

wyandotte ok here and also looking for a tail light harness for a 1967 chevy long bed i think a 67-72 will work though

Olive, OK!

Hey Rick,
You wouldn't happen to know some good places to live around Tinker would you? Got relatives down in Purcell, but I hear the I-35 is pretty nasty for commuting? Figure I will stay nearer Tinker for the first 6 months. Jay
Hey Jay, I've worked at Tinker for 6 years now. How far do you want to commute? The Choctaw/Harrah area, east of Tinker, is a nice area. Kind of a country/city mix. Lots of land but your still close to everything. Betwen a 10-20 min. commute depending on how far you move east. Most people use I-40 East to get home but it's not overly crowded.

Couple of nice apartments in Midwest City for your first 6 months are Meadowood and Willow Creek. There are some other nice ones too. Goodluck with your move.

Elgin here.

66 C20 with 327 and TH400

Better late then never. Chandler, just northeast of Oklahoma City.

owasso here

Welcome Neighbor...nice to see someone else from Owasso on here

Marietta, Southcentral on I35.

Stilwell here :hi2:
72 LWB 350 Auto

Newbie here & 1st post! Great to see another forum especially w/ some Okies!
I've got an 85 S10 w/ 85 305/700r4 tranny! Can't wait to get to know some of ya'll!

where in okie city? just out of curiousity......

Newbie here & 1st post! Great to see another forum especially w/ some Okies!
I've got an 85 S10 w/ 85 305/700r4 tranny! Can't wait to get to know some of ya'll!

Glad to have you aboard!

Newcastle here. Just south of OKC/Moore. Read something about a get together in an earlier post. Did we do it or are we still in the "planning stages"?

Here is another newbie. Im from MOORE and I have just got into trucks. I bought a cheap 82 LWB, about a year ago, that I was going to convert to a SWB but that looks like alot of work. I think I am going to sell it and get a project SWB to start over with.

welcome speedfreakbbc from a fellow Moore-on. :D

Static, noone ever stepped up to plan the get together.. i have done it in previous years but had too much on my plate to do another one at the moment... so right now there doesnt look like there will be a meet this year...

Washington, 10 miles south of Norman.

Mike

way way waaaaaaay south okc here almost to norman

where in okie city? just out of curiousity......


I am in S. Okie City! I think I've talked to you on another forum. Ihad an 85 Silverado which got stolen! Now, I've got an 85 S10 305/700R4. I'm in the process of building her up!

Nice to see you Kevin!

East Oklahoma County, past Tinker.

1967 C-10 w/307 2-bbl and 4-spd. Heater, AM radio, speed buzzer, full gauges, factory chrome bumpers.

Marlow, about 70 miles southwest of OK City.

Hey Guys...just saw this post. I never really thought we had that many OK members!! Its gotten really high!

Well I am gonna be back in the squarebody style again after this weekend. :) Not nearly as Blingin as the old ride ..but it will be a nice solid lil truck! :D

Finally got my LWB here!! Been toooo long without it! :metal: Now we just need for everyone to get together and meet and shoot the sh!t.:lol:

I'm All For That! Name The Place! When Is The Next Swap Meet And Where?

Hey Guys...just saw this post. I never really thought we had that many OK members!! Its gotten really high!

With as many trucks that I see just in Midwest City, I knew there had to be more out there in the surrounding areas.:lol:

hehe mine hasn't been seen by anyone but family members in 10 years or so.....

Hey Guys...just saw this post. I never really thought we had that many OK members!! Its gotten really high!

Well I am gonna be back in the squarebody style again after this weekend. :) Not nearly as Blingin as the old ride ..but it will be a nice solid lil truck! :D
one word...alarm :D

Good old ponca city.

i always look for board members when running around the city...it's hard to tell who's who

Mcalester

mcalester is pretty close, if you are ever in the pocola area let me know.