Hey folks! I have a 62 Chevy that I pulled apart to rebuild a few years ago, and ran out of both time and money, and it's been sitting (inside) until recently when I lost my storage. Now I need to get rid of it. Wish I didn't have to give up on it, but I've moved on to other projects. I'm hoping some of the parts will help someone else with their project.

Here's what's available:

1962 modified shortbed frame: The frame has been shortened to the same wheelbase as a blazer. It has also been narrowed in the rear, as I was planning on pro-streeting it. The front suspension is from a 72 chevy; it also has AIM 2" dropped lower control arms, 1" cut coils, and Chisolm dropped upper control arms.

Cab: has rust in the floors, all corners. I was told by a body shop that it was repairable, but would cost about $600 to fix it. Small rust pinholes along top of windsheild. Windshield is good, as is small back glass.

Doors: Pretty good shape, good glass. Usual rust, but they were dented by someone unknown while the truck was in storage (nice, huh?)

Front clip: Average shape, rear of fenders are rusty and need fixed; I have patch panels for the fenders. The inner fenders have the usual rust but are repairable. The hood is in good shape except that it has several high-point dents in it. Fixable. The grill is steel and in pretty good shape.

Bed: Unique 5' bed length. I was going to join it to the cab and have the world's only 62 Blazer. Bed is in bad shape, I was saving it for a template to build a new one.

I have some misc parts, but alot of stuff has disappeared over the years.

I'm asking $400 for the whole thing, and I'd rather sell it all together than part it, but I guess we'll see?

If anybody's interested let me know. I don't have anyway of shipping this thing, so I would rather you come to get it. The truck is located in southern Illinois.

This will be my first time posting pics, so I hope I do it right.....

if you want to part it i need some stuff . front suspension looks good to me

i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address
edneed20@comcast.net
Thanks Ed

i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address
edneed20@comcast.net
Thanks Ed

Hey Ed. Sent you an email with more pics. Not sure about shipping any of this, never shipped anything this big before?
:confused:

Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

C-1072, The regulator works well on both sides. It does have a brake booster, but it's from a 70's model Monte Carlo. I would be willing to sell you the front crossmember, etc. but the crossmember is welded in. Any chance you'd be interested in the entire frame?

I couldnt get the frame its a little far for me . If you want you could just unbolt the controll arms and and ship the stuff greyhound .Do you know what year the spindles are ? are they stock or dropped ? Any idea on a price ?

I couldnt get the frame its a little far for me . If you want you could just unbolt the controll arms and and ship the stuff greyhound .Do you know what year the spindles are ? are they stock or dropped ? Any idea on a price ?

c-1072, The front suspension is from a 72. It has stock height spindles, 2" drop lower and upper arms with new ball joints (they have a little surface rust, but they are still ok.) The spindles, control arms and springs are all powder coated.

I have about $600 in the front end, is $200 plus shipping too much? I also have nearly new rotors, new calipers for it. Interested?

I found some more pics, have lots more, email me if interested:

do you think you can guess the wieght of the spindles controll arms springs bearings calipers roters ect .

do you think you can guess the wieght of the spindles controll arms springs bearings calipers roters ect .

<whistle> All together? I wouldn't doubt if it'd be near 200#, at least..... the rotors alone are about 25 or so apiece, the calipers are a good 10 each, and I'm not real sure about the rest, but I don't remember them being light... The truck is about 2 hours away, I'll check the next time I'm down there, should be next weekend.

if it is gonna be to heavy i can skip the rotors i wll have to check on the core for the calipers . a week or to is fine it will give me a few days to put the cash together . i just bought this truck and i will pick it up tommorow

i pmed you about your truck for sale thanks

i would like to get ahold of you asap about the truck let me know thanks

i am interested in your truck can you email me as soon as you can thanks

dloughney@ultrafab.com

i got your pm but it just said i pmed you please get in touch with me asap thanks

check your pms thanks

Hey where in upstate are you ? always good to find truck nuts in the area .
Todd

It looks like I may have the front suspension sold. Gostranger, I will have a look at it this weekend and try to find out some info on shipping this weekend.

Still lots of parts left. I'm hoping that someone will buy the rest of it lock, stock, and barrell, because I don't want to ship big, heavy parts. I don't really have time to mess with it since it's two hours away from my home. I will be glad to head down there to help you load up if you want the whole thing.

Here's more pics. I will be adding a list of parts that are left when I get back from the holiday weekend.

Have a great 4th! Remember the people that gave their lives so that we can kick back and have a beer on a long weekend in our free country!

:c2:

Detail pics

toddro could you post or pm me a way to talk to you on the phone so i can talk to you my email wont work next week i have it off from work but if you pm me your phone # i will call you i may want more parts! thanks

What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo.

Raphyel

What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo.

Raphyel

Raphyel, the doors have both dents and Bondo. If you look at the pics you can see both of them. However, they are repairable. Let me know if you are still interested.

Gas pedal?? Very interested in that

Gas pedal?? Very interested in that

Neat, huh? Don't see many of those anymore...

How about $10 plus shipping? PM me your zip and I'll find out the shipping cost for you.

TTT - Still got this thing and I'm losing storage. Anybody need anything? I'd hate to scrap it...

I could use the front clip and box.

I'm in South Dakota and could drive over to pick it up if the price is right.

Mike

Oops...I am interested in the front clip and doors instead. I did not see the box was hacked up.
Mike

Put me in line for the control arms IF they aren't sold yet.

Oops...I am interested in the front clip and doors instead. I did not see the box was hacked up.
Mike

1Ton, if you are willing to come and get it, I'll sell you the front clip for $75 and the doors for $50. That too much?

i d like the gas pedal for my 62. are you willing to cut a piece off the cab and ship it, about 1 ft square if its not a rotton, it would be the outter vent box on the drivers side i need the lower half start about even with the door check straight foward, i need the spot welded cover piece that cover the in side vent
please let me know
Ed
shipping zip 08201 email edneed20@comcast.net

Sorry about not getting back sooner. The guy that I got the truck from moved to MN but he had the title at one of those payday loan places. He was coming back from MN to get the rest of his stuff and he was going to get the title out of hock. He came back and promptly disapeared without getting the title. Really not a big deal to me...I have a truck that I haven't paid for. I drove it until the tags expired in August. But now I have a truck without a title, no tags, and Lord only knows where he is in MN.

So...until I get something figured out on this, I'll have to pass. The price was excellent too.

Mike

hi im trying to locate a windsheild for my dads 62 panel unfortunaly your truck is in illinois im in mass. also you werent sure about parting out but incase u you change your mind i may need some other parts as well. i will pay shipping. thanks

What Do You Have Left To Sell............hemmit

What Do You Have Left To Sell............hemmit

Pretty much all of it. I shipped the front suspension, but after that fiasco, I won't ship anything else. So I've basically got all of it but the front suspension and the gas pedal left. If anybody wants to offer a reasonable price on the rest of it, *and will come and get it*, I'd appreciate it.

hi im trying to locate a windsheild for my dads 62 panel unfortunaly your truck is in illinois im in mass. also you werent sure about parting out but incase u you change your mind i may need some other parts as well. i will pay shipping. thanks

Wadeg, I can part it, but I really don't want to ship anything unless it's small. Let me know what you need....

got the front suspension! it made it no trouble sorry for the inconvience!!i didnt realize it was a problem for you i was interested in the tie rod ends you said you had some new ones let me know thanks

to everyone toddro was a good seller!!!