hello I was wondering if i took the complete wire harness out of a 1980 chevy half ton if i could use it all in my 1967 chevy? as I plan on installing the tilt column in my 67 from the 1980?

You are going to be making a lot of extra work for yourself I think.

Would the complete harness work? I doubt it. There are to many things in different places for it to work. Now if you took the 80 harness apart and intergrated it with the 67 harness you could probably come up with something that would work reasonably well.

You could compare the wiring diagrams for the 1980 and the 1967,and see which wires you would need to keep from the 1980 harness,then just tag them into your stock harness. you'll probably fins some of your stock wires will have to change color,so be sure to draw yourself a diagram of what colors go into the splice and what colors come out and note what colors connect. Makes it a ton easier if you need to repair a pinched wire or something later. When you pull the later column out,be sure to cut the wiring below the connector plug. You'll want to integrate it into your wiring harness.

Ok thanks for the help guys but i think i was talked into a aftermarket wireing harness, So is there any companies like painless wireing out there?I have heard mixxed reviews about the painless kits and have never tackled a project like this before, so I am still newb at this and have alot to learn?Any advice?