I have set up agreements with several salvage yards I frequent. These yards have several older chevy and GMC pickups as well as a couple newer suburbans etc. There are some trim pieces left in these, dash pieces, seat belts etc., as well as what you would normally find in a wreck. They are on the way home from the fire dept. I will look through these if there is a need from someone who does not have access to a yard. I will do this for a nominal fee and will depend on the part but it will be done mainly as a service for some of you out there that don't have the resources. Chip

I am going there Saturday and write down a list of vehicles on site and what these vehicle have as far as parts that may be utilized. I will copy a list of needs and set up delivery scenarios to zip codes. Chip

I will also have a digital camera with me and take pictues of a needed part to see if that is the right one and condition.....

Last but not least, if you don't wish to post the needs on this page...PM me or my E-Mail is ParrotHeadParts@aol.com

I would be interested in a decent, blue 60/40 bench seat from an early nineties GM truck.

I'll start the search Burb....If I find one I'll get the info to you.

i'm looking for a good floor mat that came original in 91 with 5spd shifter.

I am looking for a door that is from a 95 96 97 that is with power options.
I can't find any around here. Have couple more places to try. Looking for prices that you can get them for. Also i am looking for no dents ,paint dont matter, minor scratches, Dont need mirror will take though, also will window, and all the inerds (sorry for the spelling), I think you get it thanks

Ok, the list is made and waiting on the weather to clear or it will be a mud bath at the yard....

hey cantburn how about a overhead console for like a tahoe or burban like the one you have???

PM sent

how much for the grille???

I need a 1 piece rear slider window for a 94. Thanks Ron

look for it today

Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454

Any luck with the door. thanks man

Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454
these can be found at the dealer for around $4 each.

i need a 69 tailgate...fleetside

I'll pay good money for a solid bench from an '88 to '94. Not interested in 60/40's, bucket seats, or work truck seats... looking for a solid bench, with or without headrests, with or without the fold-down armrest, and must be in good condition (not torn, not greasy, etc). If you run across something like this and are willing to ship, I'll make it worth your while. This goes for anyone who might have one of these :)

Thanks

John

PM's sent to Veedublu and 1969owner

Still waiting on specific info on that 4l60e

Bigunde..what condition do you want the trans in....I have found them with a price range from $350.00 to $650.00 plus shipping. I am unsure of the condition of the 350.00 just the difference in salvage yards maybe.It is still a work in progress.

Alpha here is a few pics of the door.....also found a decent 60/40 bench in blue...chip

Here are pics of the bench.

I could use that door handle trim piece you're holding up in the last "door" pic! Actully I need one for both sides and the little tweeter speaker cover for the passenger side.

I'll see what I can do...LOL

thanks cantburn for my door seal i got it today that sure was quick.
thanks again.let me know when ya find a good floor mat.

how much for the blue seats???

NO prob Kurt...still looking...found lots of blue ones if ya want one of those!! Partsman...do you mean the 60/40 split bench??

Here is what the console looks like after install.

I interested in the blue 60/40 seats as well, if 454_72_4x4 doesn't respond. I will send him a PM...

Here is what the console looks like after install.

Those sure are some nice lookin seats! LOL! ;) :lol:

I interested in the blue 60/40 seats as well, if 454_72_4x4 doesn't respond. I will send him a PM...

Sent ya a PM burb!

http://chevytruckworld.tenmagazines.com/showownerpic.ten-u-6878-n-184955-pos-1

that is a picture of the center caps. thanks again

yeah the 60/40 blue seats??

I'll check on the 60/40...they looked good, no cuts or tears...need a cleaning though.

just check on them and ill let you know if i can afford them!!:) thanks Danny

You said there might be some newer stuff.... any chance on finding a folding jump seat (the dark grey/charcoal color) for a 99-02 silverado?

I would be interested in a set of the red bucket seats pictured above

Never heard back from you about a solid bench?

Hi Alpha...see that your on....LOL

Here are a few more parts that have been pulled...still available.

Sorry to bother you... but if you or anyone else can locate any blue sill plates that bolt to the floor (covers the door weatherstrip and part of carpet... I really need to find some for my 1996 ext. cab 4 door. I really only need the front pieces for both the driver's and passenger's side. Thanks... I am having problems finding these. Trevor

here are a couple of pics of the sill plates. E-mail me if you want them

Alright!!! gettin caught up. I think I was able to help of few of you all out there....still working on a few harder ones, but ready to take on some newbies...so if you need a part gimme a ring, page, letter, email.....

Parts is Parts....LOL

Can you look around for a 90s diesel bumper (with cut outs) with no rub strips. I would like to take the rub strips off of my truck and would like a bumper without the slots for the strip. Know what I mean? Thanx.

I'll get right on it....Think I have seen a couple of diesels out there.

What do you figure shipping costs would be from FL to the west coast of Arizona for a front bench seat?

on the blue chevy up there what do they want for the tailgate.
LOL
Thanks for helping me though.
110% Feedback thanks again

Is everything alright with the door Shane? glad I could help...don't see too many of those, got lucky. I have the other one for parts....lol

MrBin....If you want the 60/40 split bench, I can run number right away. If you want the one piece bench, I will ship it Greyhound and will run the numbers on that as well....need to know what bench you want.

Yeah.....kinda interested in blue, tan or black 60/40 split bench for my '72 burb. And another split bench for the second row if the price is right.

Sent a PM on what I have seen.

i am looking for some good power mirrors for a 93 chevy for my dully and also looking for some dark leater buckets and bench seat from a 99 or newer also the digital display that goes in the roof console that for the 93 thanks

also take a look at those diesels if the fuel injection pumps on 92 and 93s' how much and cheak miles if posible i need one for a core thanks again

I'll get right on it.

I could use a blue dash that is not cracked.
Todd

what year 4X4...'72

Need a burgandy glovebox door for a 95 up chevy or gmc 1500? Let me know if you can help.
Thanks, Kade

I'll see what is out there as far as glove box doors....Problem with these damn things is they fade and the color may not exact but I have two newer trucks that are mid '90's that just came in and have burgundy interiors. Should have your door on one of them.

How about a set of vortec heads, 1996 and up 5.7 and a pair of BBC if they are gen vi. let me know

hey chip any 95-99 tahoes??? if so look to see if they have the cargo cover in tan for the rear part of the truck!!!
thanks Danny

How about a 60/40 blue bench seat like out of a 1996 K2500? Bill

I have a easy one for you.....if you find time.
For a 1992 C1500,
1. Two center round A/C baffles and the little steel clips that hold them in.
2. Two bottom steel clips that hold the cassette panel in.
Thanks Much!
Mike

Have eveyones requests and will be in the process of working them in the yards on Thursday 04/27 Hopefully I can locate some of this...some I have...seats are a bitch all of a sudden Can't find them anywhere...I think I am going to have to make a run to the middle of the state and see what is at some of these rurual yards.

Hey Cantburn. If and when you run across a glovebox door grey in color for my 98 1500 lemme know. Thanks

How about a power mirror switch for a 91 Chev 1500. pic to location also.

a friend of mine is needing the jack cover for his 91 silverado.he says that it bolts up to the floor behind the drivers seat.comes all the way across the back of the cab.has like a cubby hole or something to put stuff in.can you figger out what i'm tryin to get across lollol.he told me but i've never seen what he's talking bout says his other 91 has it.if ya find one it needs to be blue.thanks for the help.

Kurt, PM sent.
:metal:

hey kurt let me check around the house i just took one out of my other truck for a system

hey chip find out if you can if there are any jacks and tool sets in there and how much to 32034??? thanks D.

answer your e-mails

Using a friends computer and tied through a command post Firefox browser.....I'm on deployment for the fires in Volusia County, Florida....I am not sure when I will be back home, maybe 2-3 weeks. I am running Logistics for the command staff. I will send everyone a note when I get back. Sorry for not throwing a word out before hand but I did not get alot of lead time on this and had to hustle....Cya, Chip

be careful down there and know that you and all the firemen are in our prayers.

you still doing the whole salvage yard thing??? I need a 5.7 Vortec, and a 4L60E tranny to a 1997 Chevy, or GMC....... I also need the tweeter grille covers to the front doors of a 1995-1998 chevy or gmc.