I pulled some parts off a '66GMC a few years ago, had a SBC Chevy in it...

I have the motor mounts from frame to the engine, spare tire bracket, automatic tranny cross member and a set of SBC headers, and a good radiator from it as well.

How's a C-note sound, and you come by and pick it all up?

I'm in Oakdale, Ca.

Cross meber and shroud are sold.

are they v8 motor mounts?

Yes. The engine I pulled from it was a SBC. I unbloted the mounts from the frame...infact they are still attached to the clamsheels to the motor

How's 75 bucks for the lot?

And...I found the radiator shroud for it. Smeone must need these inexpensive parts?

Would you sell me just the radiator shroud? and shipping to 70739. Jeremy

Sure, I'll check cost through the PO, I'll have to make sure size-wise it'll be able to be mailed.

Thanks let me know. Jeremy

Take a look at the pics, I don't recall which one came off the GMC, and which came from a Dodge Van I used to have.

The shroud in the first pic, has about a 1.5inchx1.5inchx1.5 triangle chip out of it, should have taken a better pic, but it's 120 in the barn right now, I needed to get out of there ASAP.

Shipping either through USPS max would be 22 buck, but probably less, I plugged in 10 pounds for the weight, probably will be closer to 5/6 lbs.

I'm thinking 35 shipped okay? If the shipping is less (and it should be), I'll refund from the 22 estimate.

It's the top pic, the smooth one. $35 sounds good. PM me about payment method. Thanks Jeremy

[QUOTE=5Mike7]I pulled some parts off a '66GMC a few years ago, had a SBC Chevy in it...

I have the motor mounts from frame to the engine, automatic tranny cross member

[QUOTE]


you still have these parts?

[QUOTE=5Mike7]I pulled some parts off a '66GMC a few years ago, had a SBC Chevy in it...

I have the motor mounts from frame to the engine, automatic tranny cross member

[QUOTE]


you still have these parts?


Yessir, I still do:)

i'm probably going to need these parts...i'll let you know on tuesday, wednesday at the latest

No issues, take your time:)

Mike sent you a pm. Jeremy

Jeremy, check you PM...MO arrived today.

im interested in automatic crossmember, can you pm me more details or have any pics please? and will you ship to kentucky? thanks.

you know that the 6 cyl mounts are the same as the 8 cyl mounts all you have to do is move the mount front. holes at the frame -k-meber. the holes are in the frame aready .

Sorry guys, I didn't have email notification turned on. The Crossmember may be sold, I just received a PM a few days ago about it.