title say's it all. It's hanging on by one bolt at the moment. I can't get the drag link off the steering box. any suggestions?

Well hopefully your frame didn't crack?
Getting all apart is hard even with the bolts not sheared.
I can't type a fix but I can suggest what tools to use ;)
BFhammer, torch, grinder, prybar, ratchet strap to hold the box, drill, hmmmm and a six pack :metal:

Use a claw puller.

yeah, I really hope my frame didn't crack.

or a pitman arm puller or a pickel fork.

same exact thing happened to my 71 K5... I sheered 3 of my four, and messed the fourth one up... I wasnt really wheeling either, I was turning around and one tire dropped into a small ditch, just enough to flex the suspension, and snap!

It didnt crack my frame though, hopefully you are as lucky.

It didnt crack my frame though.

Thank God for that one, that would have sucked :(

Pull the drag-linkoff the steering arm.Once you have it off the vehicle you can get the pitman off much easier.
I just responded to a post where a guy was saying using washers to mount p/s on a`67 ain`t no problem,then I read this.:lol:

Obviously not Grade 8 bolts, make sure you replace them with grade 8 stuff.

Use a big hammer and wack it hard as if you were hitting it on. This will loosen it up a bit. then use a pickle fork and a hammer. I've got a pickle fork if you need to borrow one. Just come by.

Use a big hammer and wack it hard as if you were hitting it on. This will loosen it up a bit. then use a pickle fork and a hammer. I've got a pickle fork if you need to borrow one. Just come by.

yeah I definatly need to get a pickle fork, But I have no car right now. I'll see if I can borrow one, so i can borrow a tool.

Well, I got the box off today...I just needed a bigger hammer. Frame's not cracked...all is good

Frame's not cracked...all is good

COOL!!!!!!!!!!!!! :metal: