Finally remembered to take some pics of my tilt column that I installed a month or so ago. This is a mid 70's automatic van tilt column that I modified for my manual 4 speed truck. That involved shaving off the tilt shifter attachment point and removing the shift indicator housing and filling in both areas.

Here are some pics of the modification process.

http://yukon.b0xen.us/albums/vantilt/image/image1.jpg

http://yukon.b0xen.us/albums/vantilt/image/image4.jpg

I cut a beer can up to fill in the various holes and used JB weld to secure them and fill in the areas.

http://yukon.b0xen.us/albums/vantilt/image/image10.jpg

http://yukon.b0xen.us/albums/vantilt/image/image9.jpg

Then ground it smooth.

http://yukon.b0xen.us/albums/vantilt/image/image16.jpg

And here is the finished product.

http://yukon.b0xen.us/69chevy/steeringcolumntilt07.jpg

Not sure if I like the steering wheel - might change it down the road.

http://yukon.b0xen.us/69chevy/steeringcolumntilt09.jpg

http://yukon.b0xen.us/69chevy/steeringcolunntilt08.jpg

WOW, awesome job!! Thanks for the pics and ideas.

Shortened also I see, looks great!

Thanks for the compliments.

obsesive23 - didn't have to shorten it - I have a body lift and I also added u-joints at the steering box and steering column along with a telescopic shaft - that allowed me to position the column as deep as possible.

Awesome, I plan on doing the same to mine. Thanks for the pics and ideas.

Jason

Ok, how about a write up, and some pics beyond the firewall. I want to do that to my jimmy soon. I have the bl, and ujoint already.

Very nice work to.

Here's some more info. I added a Borgeson telescopic shaft (1" DD x 3/4" DD) to my 69 K20. I had previously added a Borgeson U-joint at the steering column.

Here is a pic of the u-joint which is 3/4" x 30 spline and 1" DD to fit the power steering box I'm using which is from about a 1978 Chevy 4x4.

http://yukon.b0xen.us/69chevy/steeringboxujoint.jpg

and a pic of it at the steering column - the steering column was not secured to the firewall when I took the picture so ignore the block of wood that has the column wedged in place. That U-joint is 3/4" x 36 spline and 3/4" DD.

http://yukon.b0xen.us/69chevy/steeringcolumnujoint.jpg

The telescopic shaft ended up being about 11 1/2" long.

just wondering have any of you used this
http://www.speedwaymotors.com/xq/aspx/paging.yes/dept_id.581/display_id.2049/qx/Product.htm
It looks like it would work.