Hi, I'm new to this, actually my first post. I have a 350 cu. in. motor with the following info "Vo330 TDS". I don't have any problems with the first VO330 but I cannot get info on the suffix TDS. Can anyone help me out?
Regards and greeting from Newfoundland, Canada......:

Welcome to the board from Texas. Try getting the number on the block back by the distributer for the coplete number

Welcome to the board from Western Kentucky. You will get plenty of help here.

Letsee...yes, you climb into the trucks underhood (look out, the bumper is slippery), turn upsidedown, support your weight on the carb (marks on your arm will go away eventually), hold a can of carb cleaner in the other hand, a wire brush in the third hand, stablize yourself with your head pressed against the hood, and write down the numbers with your fourth hand...you are what? on the passenger side!!?? Well then ...oh, and bring a flashlight.
Welcome from Seattle, to the board and the wonderful world of GM trucks! ET

Welcome from FT Worth TX.

Welcome to the forum tomtorbay. If you don't get the answer you need here. ask again in the 67-72 forum.

:welcome2: to the board from KY!

Welcome to the board from South Mississippi!

Welcome To The Boards From A Fellow Canuck!

Welcome from Kelowna

To make is easy to get the numbers. First clean the area off, then get some modeling clay and press it on the area wait a couple of minutes and remove it very carefull. Put it in front of a mirrow and you can see all the numbers that way.

:welcome2: from Washington State

:welcome2: From West TN :hi2:

Welcome from Wallburg, NC. Good luck with getting the info. Lotsa guys (and gals) here willing to offer help.

Welcome to the board from central Califorina!:metal: