HEY I called my local auto parts place and asked for moog brand front end replacement parts to do the A ARMS, TIE RODS, BALL JOINTS, PITMAN ARM, STAILBALIZER ETC. and they told me moog dont make em any longer. none of them . anybody else had this problem?
bob in tn.

I bought all mine off ebay cheap.
What year truck do you have?
I have a moog master catalog and can give you the part #'s:)

The Early Classic sells a kit that's a giant pile of Moog parts to do just what your'e talking about. Just wrapping up a complete front end build of my 1972 before I drop in a 509, myself. :)

You'll need an air hammer and rivet cutter attachment if you don't have one to remove the upper ball joints if they have not been replaced prior.

The other truck places offer the kits too. Much less headaches to just buy it all in a box you can pull from.

Try a different part store, there warehouse just might not stock it. Parts Plus where i work can get them easily.

That sounds strange. I bought MOOG parts for my front end last summer at a local auto parts store :D

Just a little tip about front end parts. I've got a 72 1/2 ton suburban that I ordered a complete front end kit for. Unfortunately chevy decided to put a 3/4 ton front end on it, so none of the parts I ordered fit, I had to return them all and swap them for 3/4 ton stuff. Just my .02. Good Luck.

I get my Moog stuff from Oreilly's

Mike

Look it up online.I found it in a quickie search a while back/Moog still makes it and it's still top notch stuff.Usually way better than Factory unless it was factory Moog.