FNG here, did a seach, but nothing came up indoer replacement door, etc etc...

Does anyone know of a company that is making a door that will fit the demolished one on my 74 Blazer?

Everywhere I look Im told to buy the Truck door and cut the frame off...

Is that it? Seems like SOMEONE woudl make a door for this thing!!!

i take it you got the full removeable top ? caus otherwise the regular door would work. just cut off the truck door, but then add a plate inside for the support.

If you look at the factory door they basically did the same thing.....cut off the top of it. I was planning on doing that on my 74 when it comes time to replace the doors. I do not believe I have ever seen any aftermarket companies advertising these doors so your best bet would be to cut some yourself.

Oh and btw....welcome to the board from TX!!

I hate to say it, but even LMC doesn't have doors for 73-75 K5's. If LMC don't have it, it's probably not being repoped... So unless you happen to come across an actual NOS door, your stuck getting one from a later Blazer or truck (they are the same) and cutting the frame.

If the door isn't smashed to bad, you might be able to get away with just putting a skin on.

Still Cutting full doors down isn't that difficult. Salvage the rubber cap off of the top of the a-pillar, the fiberglass cap for the rear and the tin support under it off of your old doors. You'll need them to put back on the cut doors. Follow the write up on CK5.com for the details of how to cut the doors.

My doors aren't caved in, but the bottoms are rusty. I'll probably have to fix the lower sections before long..

Even if you order a door from GM it is a truck door with a template to use for the cutting. The doors are the same. just put the little support bracket back inside the door at the rear when you cut the top off of it.

Ditto on what everyone else has said. There isn't a door availible that is already cut. You will have to cut it to make it work.

When GM offered a replacement door for the 73-75 Blazer, it was a truck door, a template, a filler, and instructions. BTW, if you were going to add power windows, this would be the time to upgrade to the 77-up doors.