here's a couple more pic on Marge's progress. the caption on the pic's pretty must tell's ya the story.
i'm using a FWD steering column along w/the cable shifter in conjuction w/the modified cross rod linkage from the Caddy && the stock 48 chevy pedal assembly thats been modified to mount a 87 Chev 3/4ton PU MC & Booster on it &&& that is bolted to the S10 frame near where the trans crossmember was bolted.

cross bar w/cable hooked up to it (http://rides.webshots.com/photo/2347036180046188097eirXEk)

cable bracket on pedal assembly (http://rides.webshots.com/photo/2225723690046188097BvShlf)

Brake Booster Clearance. (http://rides.webshots.com/photo/2247613990046188097eiabwm)

MC & Booster (http://rides.webshots.com/photo/2183707730046188097nagKsR)

Master Cylinder Clearance (http://rides.webshots.com/photo/2318190110046188097yABhJy)

MC Clearance & this is w/o the pads between the body & frame (http://rides.webshots.com/photo/2354751450046188097SbrIAs)

Column Cable Shifter (http://rides.webshots.com/photo/2411189460046188097yWDRip) is in w/another brace to be added soon, it will rap around the lower part of the column down to the cable. didnt think i'd ever get this done.


if by some chance the pics dont come up for u, click on Large Marge below & go to the last page...joe

What make and year of car did the column come out of? Thanks,

Rob

What make and year of car did the column come out of? Thanks,

Rob


came out of a 93-94 Buick Park Ave. BUT i used the cable from a mid 90's chevy lumina van(because thats what i "was" going to use until i found out the column was junk), BUT i believe the cables are the same lenght...joe