I put a used/original Locker in my Eaton and had problem,so I took it right back out.I had a second one and put that in,no problems.On inspection (again) we saw nothing wrong and it only goes together one way.I had taken it apart to inspect/clean prior to installing.The problem I had was one wheel spun full-time and the other didn`t.It was worst than bias.It was hard to start moving w/o skirchin`the live side.It took 5 trys to back up the slope of my gravel driveway.I suspected a broken spring.When we re-inspected it we saw nothing wrong.Well,in the process one spring got lost (at friend`s shop).So,I want to get another spring.I`m sure an HO52 part would be a tough find.I`m wondering if the 14-bolt spring could interchange since the two units can interchange.It`s a shot in the dark.Any suggestions?I haven`t called anyone about service parts.Again,anyone to recommend asking?

Ttt

Guess if your brave you could post the question over at pirate4x4.com - I sure don't know the answer to your question.

I should prolly call about service parts and ask Randy`s,West Coast,Reider Racing,etc.