His guys,
This is my 67 LWB, that I am currently trying to get on the road (soon to be a daily work-horse)

I am on the tail end of installing a freshly rebuilt 350 & a good used 400 trans

So far the only customization is we have extensively modded a 84 Chevy tilt column to fit

The future holds air-ride suspension & a whole lot a other stuff I haven't thought of yet

Today I started to install a 98 Chevy rear bench seat (came out of my dads 98 4 door), so I thought I'd share pics (it's so nice having a seat that flips forward) One thing I don't like about it is that it's too tall IMO, but the stock one was about the same (some day I'll chop the mounts down)

The front holes lined up really close (just had to pry a little to get one of the bolts in), now I need to drill new rear holes & weld a nut to a big washer or piece of metal then weld that to the bottom of my cab that way it's like factory

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170009.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170013.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170015.jpg

Today I also started building a new cross-member for the trans, so it won't be such a butt to run my exhaust

I built this one in hopes that I would have enough clearance, but may have to build one out of tubing so that I can bend it to have even more clearance

I used a piece of C-channel I had laying around & a little angle, all thats left is to drill holes & paint it

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170019.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170021.jpg

the seat fits nice, and that cm will deffenitly be strong..haha

Yeah, I tend to over build a little :lol:

looks good. This seat are great for these trucks. Really slow build sounds like my truck project too. Nice work on that cross member!

Yeah, I might could get some stuff done if I would just clean the shop :crazy:

I'll prolly clean it a little today

It's a 35 X 60 and you couldn't even walk in it the other day till I cleaned it up some :lol:

Has anybody ran the Cherry Bomb Extreme mufflers ????????

I also changed out my steering-wheel yesterday, just gotta get the horn working :cool:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170017.jpg


Sorry for the crappy pic :lol:

That '98 seat is about as good as it gets for those trucks - very comfortable and look nice, but a little hard to find.

Lucky for me, my dad does construction and removed his rear seat so he could haul more tools

I was gonna put it in my 54 ford, but that project is on long term hold :crazy:

It was really nasty from sitting outside in the 54, so it took awhile to clean

Here's my buddy Scott, we did our own "Simple Green" commercial :lol:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160001.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160004.jpg

It's Clean !!!

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160011.jpg

We had already cleaned the back before I thought to get pics :crazy: but the pics don't really show how nasty it realy was :barf:

I see the seat but where are the pics of the Truck???
PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS PICS
Then again maybe I don't know how to get the Truck pics off the puter? :crazy:

So Sorry !!!!!!!!!!!!!

The funny thing is, that for all the pics I have I only one pic of the whole truck

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_01040006.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02150016.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02150017.jpg

I'll try to get some more pics soon :cool:

Here is a few more pics

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_01160015.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_01160013.jpg

Ok, got some pics today

Although I didn't do anything :crazy:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02180003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02180004.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02180008.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02180009.jpg

yeah you did. It's called surveying and planning! lol. Nice!

I didn't have much time at the shop today, but I'm almost ready to put in my X-member I built

I got the old one pulled out & the holes drilled in my new one, now I need to test fit it and drill the holes in the frame then paint it and put it in for good

I didn't have time to get pics, but should tomorrow

Well here is an update :crazy:

I didn't get out to the shop till late (again), but I did get some stuff done :metal:

I wanted to convert my truck to cable throttle instead of the old linkage stuff
At first I was just gonna buy one of Jegs throttle plate thingys (till I found out that they're $80 bucks :crazy: ) so today I decided to make one :metal:

I took a sheet of steel sheet that I had lay'n around & took the throttle mount thingy from a 73 parts truck that has a BOP engine in it

Anywho you get the picture, So now I have to figure out how to convert it to swing-pedal :barf:

I have to get a new trans mount, then I can finish my custom X-member


http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200005.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200010.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200013.jpg

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200017.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200018.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200020.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200022.jpg

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200026.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200027.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200029.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200030.jpg

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200031.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200032.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200033.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200034.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200036.jpg

I didn't get to bolt it down because I need to trim one of the edges a little :whine:

Next project is to install the rear bumper, but first I have to relocate the big A gas tank :crazy:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200040.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200041.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02200042.jpg

http://i81.photobucket.com/albums/j223/903262/2007_02140051.jpg

Sorry but uh I only get the red X's. :(

Hmm, thats weird I've never had anybody have a problem with my pics

Here is a link the the PhotoBucket page they're on

http://s81.photobucket.com/albums/j223/903262/Bad%2067/

Ok, made a little more progress today :metal:

I got my trans X-member almost bolted in (gotta drill holes in the frame) woulda had it in but some of the PO's (previous owners) drilled / torched a bunch of holes in the area I need to drill :crazy:

So I plan to weld these holes up so that it's not so week :cool:

I also got my throttle plate finished (just had to trim the edge & bolt it on)

:blah: On with the pics

Old P.O.S. X-member

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210009.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210010.jpg

New Sano X-member

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210005.jpg

I also started my swing pedal conversion, but ran into a snag, the trans I'm running is a 400 so it has kick-down switch
Well the swing setup I'm using is off of an early square-body & has the switch mounted to the plate that holds the pedal on & when you bend the pedal arm over so that it'll align with the cable it hits the switch
So I bent the switch bracket over, & it worked (so I thought) but when I got it over to the truck I realized that it wouldn't work because the pedal arm wasn't even close to the switch

So I will have to either build a new switch bracket, pedal rod, or both :whine:

Oh yeah, I also had to cut the top off of the bracket

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210012.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02210013.jpg

Has anybody else done the conversion, with the switch for the 400

Also, what do you do for where the cable comes through the fire-wall (it has a square hole & I don't have a drill-bit that does those)
I was just thinking about taking a hole-saw to my parts truck & cutting out the square hole ?

Well I didn't do anything today... again :crazy:

But my buddy Scott was over & was dig'n through my glove-box (for no apparent reason :lol: ) & found this sweet air-cleaner nut

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02220001.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02220002.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02220004.jpg

I guess I did do something after all, I talked myself out of buying a 98 DDD (Dodge Diesel Dually) :whine: :crazy:

Sweet!

I got my new mufflers in... Woo Hoo !!!!

3" Cherry Bomb Extremes

I think that they should powder coat these, just like they do their glass-packs :crazy:

So I painted mine, then took a Sharpy to the letters

:metal:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040004.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040006.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040008.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040009.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040011.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03040013.jpg

It's alive !!!!!

Well I made some progress, I got it fired off for the first time :metal:
Got the front sat back on, almost done with the swing pedal, & finished the cable throttle

I went to a buddys place to get some parts before he crushed out, & got some sweet electric fans that'll be installed in a "weekend" project :metal:

Man it just does something to ya to here a V8 thumper with open headers :metal: :metal:

:blah: Ok, on with the pics

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060004.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060014.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060013.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060011.jpg

Ok, now for some questions

My radiator looks to me like it's a little narrow, is it ?

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060008.jpg

Next question is, was there a option for "wide" wipers or something
Cuz there is that other hole next to the pass wiper, that looks like it's for a wiper shaft ?

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060009.jpg

love the mufflers:metal: did you get them straight from cherry or what? and i think im going to use those on my truck instead of flows

I went with the Cherry's cuz everybody & there dog has Flows... Rolls eyes

These are the single chamber Extreme mufflers (they're race mufflers, so they should sound good) Hopefully the cops won't care (small town) :crazy:

I got mine though Jegs, but I looked at a lot of different sites & all of them had the same price and most had free shipping

I'll have to look into it, but I'm pretty sure Cherry Bomb has a warranty that says "If you don't like the sound, cut em off and send em back" so thats another reason I went with em :metal:

I just can't wait till I get em on :metal: Prolly won't be much different than the open headers :crazy: :metal:

I forgot to mention, that I found a Mallory Comp 9000 dizzy just laying outside at my buddys place but when I got it home the optical pickup was missing & it was already missing the cap

What are these things worth used, cuz new they're like $350
The parts to fix it are like $150 (unless I find some used ones) & I don't know if I could just get a good used one instead of fixing it or not

Don't know about the wipers, but yes, GM did have 2 different size radiators (width wise) for these trucks. Is your radiator a 2 core? I think the radiator you have was used on the I-6 trucks. The V-8 trucks got a wider radiator??? Or was it because of automatic vs. manual??? Anyway, yeah, there were different width radiators as well as 2, 3, and 4 core radiators. My truck used to have one like yours, but now it has the wider 3 core radiator. The moutning pads on the PS move over to the next holes. On the bottom, the mount has to be moved out and re-rivveted.

Thanks for the rad. info

It doesn't matter much cuz I'm getting a 3 core later today

So all I have to do to put the 3 core in is move my mounts, not get different ones... Correct ?

Depends on what you have now. If you have a 2 row now I think the mounting brackets might be too narrow. The 3 and 4 row radiators use wider mounts.

Get 'er in and see how she fits :D

Ok, I guess I'll find out :lol:

Thanks, Matt

Maybe the extra wiper hole has something to do with right hand drive trucks?
Edit: Found a pic
http://img.photobucket.com/albums/v412/BACKYARD88/RHD.jpg

Maybe the extra wiper hole has something to do with right hand drive trucks?
Edit: Found a pic
http://img.photobucket.com/albums/v412/BACKYARD88/RHD.jpg

That is the Answer!!!!! :metal: European and Australian vehicles used that hole.

I'd love to find the motor and mechanisms to hook my wipers up that way. I think it would be neat.

I think 67redncek covered the radiator stuff. I knew there where some differences, mostly in the core thickness, but I do believe there may have been a length difference depending on what engine you got.

That is the Answer!!!!! :metal: European and Australian vehicles used that hole.

I'd love to find the motor and mechanisms to hook my wipers up that way. I think it would be neat.


I was thinking the same thing.:cool:

id love to have my wipers like that to:gi: :metal:


and thanks for the info on the cherrys, ill look into jegs and when you get them on not only do you need to post some pics but you need to get some video for us to hear them:metal:

id love to have my wipers like that to:gi: :metal:


and thanks for the info on the cherrys, ill look into jegs and when you get them on not only do you need to post some pics but you need to get some video for us to hear them:metal:

I may build some different linkage for my wipers some day :hmm:

I'll let cha know when they're on, I'll have to figure out how to get a sound clip though :metal:

cool deal

Dude I love your avatar ^^^

Well, I haven't made a whole lot of progress but I'm soon to be finished

I got my 3-core rad & got the front end shimmed

Now I need to: fill some holes in my frame / drill new ones for my X-member, put my "new" rear yoke in, put the rad in, finish my swing pedal, exhaust, & put in my electric fans

Theres prolly more, but thats the most of it

I'm leaving today for work, & will be gone for a week (I don't want to go, but I need money)

So I will be done by the end of the month

Well I got to work on my truck today

I got my 3-core rad installed & started on my electric fans

I plan to order the stuff to bag my truck this weekend... Gee I love having money to spend :metal:

On with the pics

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170004.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170006.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170007.jpg

I put this yellow cowl on, cuz I liked the contrast :lol:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170009.jpg

I was gonna put my fans in front of the rad, but decided it would be better to put them on the other side because I could get em closer

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_03060013.jpg

Off with the ol flex fan... Woo Hoo !

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170012.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170015.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170016.jpg

I built this a long time ago, but I don't thin I ever posted about it
It's a tray I built, cuz I was tired of dropping my tools through the "big hole"
I built it out of a big sheet of metal, I cut out of a van (I did all this with a grinder, a hammer, a vice, & some round bar-stock)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04170010.jpg

Oh, & some pliers :lol:

can you show some more pics of the 98 rear seat? i need a new seat, and this has piqued my intrest!

can you show some more pics of the 98 rear seat? i need a new seat, and this has piqued my intrest!

I fixed all the pics on the first page, so if you want any specific pics lemme know

I plan to section the seat frame, like 3-4 inches
I'm 6'-3'' & only have like an inch between my head and the top of my cab (not cool for bumps) So I'll post that up when I get around to it :cool:

Lucky for me, my dad does construction and removed his rear seat so he could haul more tools

I was gonna put it in my 54 ford, but that project is on long term hold :crazy:

It was really nasty from sitting outside in the 54, so it took awhile to clean

Here's my buddy Scott, we did our own "Simple Green" commercial :lol:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160001.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160004.jpg

It's Clean !!!

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02160011.jpg

We had already cleaned the back before I thought to get pics :crazy: but the pics don't really show how nasty it realy was :barf:

Amazing what a little (or a lot) of simplegreen can do. I say you you send them a bill because those pics there are a good advertisement.

The bombs should sound good behind that 350... I have a 350 with full length headers that bolt right onto dual glasspacks and chrome turndown tips. They're deffinitly loud! I think I'm gonna get some pipes bent to exit in front of the rear wheels...:cool:

The bombs should sound good behind that 350... I have a 350 with full length headers that bolt right onto dual glasspacks and chrome turndown tips. They're deffinitly loud! I think I'm gonna get some pipes bent to exit in front of the rear wheels...:cool:

I can't decide if I should run them outside the frame or not, but I'm gonna run em out in front of the rear wheels (But still be hidden)

Amazing what a little (or a lot) of simplegreen can do. I say you you send them a bill because those pics there are a good advertisement.

Yeah, for real & they could give a lifetime supply for payment :metal:

Now if I could just get free tires... Hmms :rolleyes:

Got some more done today

Got the upper rad hose on (still working on the lower)
And started on my electric fans

There will be two (and this one is just mocked up)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180001.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180004.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180008.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180009.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180010.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180011.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180019.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180017.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180014.jpg

I forgot to measure, but do you think my fans are: too close, not close enough, or just fine ?

I also got my cowl grills in

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180012.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_04180013.jpg

And the motor for the bead-blaster came in... Woo Hoo :metal:

I can't decide if I should run them outside the frame or not, but I'm gonna run em out in front of the rear wheels (But still be hidden)

Do you have full length headers? My glasspacks run straight back... on either side of the Trans. Also you have to think about how low you're gonna go? my buddy had a '72 blazer that was slammed to the ground and had the chrome '67 corvette pipes along the cab back to the wheels.:c2: You should just run straight back until you get under the bed then turn 'em out toward the wheels. I don't know?... it's your call!

If I do run them outside the frame, I'll cut a hole in the frame & put a piece of 1/4" pipe / box the inside (for the pipe to run through)

But I think I'm not gonnna run em outside, because of the extra work (I wanna get my truck finished)

Progress?:rolleyes:

Whats the meaning of that word ? :lol:

Well I have decided to run a "normal" fan for a while, just to get my truck on the road

I went to a show with Tav the other night & just really wished I had my truck

I am getting really close, so I'm trying not to do anything I don't have to
Plus it'll give me little weekend projects to do

I have to finish my X-member install, hook up the drive shaft (and maybe have it cut down), do my exhaust, tweak my throttle peddle, put a new water pump on, & prolly some other things I'm not thinking of

Hope to finish soon :metal:

Well I'm get'n close to be'n finished (is there such a thing :lol: )

I changed out the leaky water pump & put on a "normal" fan

Mocked up my exhaust, so I could hear it (It sounds awesome :metal: )

But now the bad news
I was putting on my "new" rear yoke (that part went fine), but when I went to hook up the drive shaft I was tightening it up & one of the bolts snapped off in the yoke :no: :censored:

:blah: On with the pics

Old pump

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160019.jpg

New pump

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160016.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160018.jpg

My fan is huge (keeps the engine at 150, with no shroud)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160017.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160015.jpg

Painted a door panel

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160021.jpg

Don't remember showing a pic of my wheels (This one is the worst, cuz PO's cat like to pee in it)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160031.jpg

Old exhaust (my new exhaust will do the same, but be hidden)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160032.jpg

Couple of random pics

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160034.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160035.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160036.jpg

Don't think I ever showed a pic of the tool tray I built

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160037.jpg

Good to hear about the progress - any chance you got a sound clip of the exhuast? If so, post it up!

This is the shroud I'll be using, just gotta get some new mounting hardware

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160057.jpg

This is the bolt I broke off (Dang that pisses me off)

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160055.jpg

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05160056.jpg

Does suck about the bolt breaking - how's your access to it to be able to get the remaining portion out?

Good to hear about the progress - any chance you got a sound clip of the exhuast? If so, post it up!

I tried the other day, but it didn't come out

I'm gonna try to get one soon, 1 without muffs & 1 with :metal:

Maybe I can get a friend to lemme borrow their video camera :rolleyes:

Does suck about the bolt breaking - how's your access to it to be able to get the remaining portion out?

Well I have the tools & the know how, but the want to is not there
SO I guess it depends on what a new one costs :crazy:

Well I got a little bit done today

Fan shroud is now installed

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180033.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180034.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180036.jpg

I just have my mufflers hang'n to hear what they sound like, & boy do the sound good

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180037.jpg

Also put on my CherryBomb stickers

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180042.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180045.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05180047.jpg

Nice thread and truck :metal:

Thanks

Oh yeah, gotta have the CherryBomb sticker :D :D.

Truck is coming along nicely :metal:

I downloaded a recording program on my laptop, so I should be able to get a a sound clip soon

Well I picked up the pipe & hangers for my exhaust yesterday, so I will be getting that on today

I also plan to get my rear yoke & X-member finished, that'll be everything under the truck :metal:

So by Tuesday, I plan to be street legal & on the road :metal: :metal: :metal: :metal: :metal: :metal: :metal: :metal: :metal:

Ok, I got my exhaust on, rear yoke on, & some little tinkery things
I went for a cruise & came back with a couple of leaks I need to fix, but nothing major

I have some more tinkering to do, but I should be on the road by Tuesday :metal:

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250003.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250005.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250006.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250007.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250008.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250009.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250010.jpg

Dads 67 & mine

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250011.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250012.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250013.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250014.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250015.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250016.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250017.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250018.jpg

Don't worry, it's not warped just one un-level ground

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250020.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250021.jpg

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250022.jpg
http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_05250023.jpg

Tav & I may get together Monday (I think thats when he's off)
So that'll be cool

With me luck :cool: