As alot of you know we will be having the second board wide meet in july in Missouri.On the 7th of july we would like to get everyone together for the first swap meet for the board.Please do not turn this into a for sale or want to buy thread,it is for those coming to the meet only ok.You can look at my sig for details about the meet :)Lets make it a great one for the first one !!!!!!!

Getting closer, make me offers, I want it gone :metal:

FOR SALE

(5) Sheets of 14x58 Aluminum Diamond Plate $200 (http://www.imagestation.com/6879103/3935545999)

Flowmaster 40 series 3" Inlet / 2.5" Dual out $60 (http://www.imagestation.com/6879103/3936117515)

(2) 6 Lug OE 15 x 6 Rally's, Need repainting $20 (http://www.imagestation.com/6879103/3944565254)

Earnhardt #3 1/24 Die Cast Car Collection $2750 (http://www.chevygmcclub.com/vboard/showthread.php?t=66)

6 Lug / Leaf Spring Rearend (Gear Ratio ?) $40 (http://www.imagestation.com/6879103/3918864969)

(NIB) Ecoquest 2.0 Air Purifier Pearl White $400 (http://www.imagestation.com/6879103/3930660020)

(2) Set of Rear Blazer Armrest Ashtrays $30 (http://www.imagestation.com/6879103/3936115419)

1980's Honda 250 4Traxx Sold for Parts $200 (http://www.imagestation.com/6879103/3929760891)

47-59 Aluminum Chevrolet Heater ID Plate $10 (http://www.imagestation.com/6879103/3910191242)

2wd Front Crossmember for 67-72's $40 (http://www.imagestation.com/6879103/3936117510)

Small Block Chevy A/C Brackets $50 (http://www.imagestation.com/6879103/3930761153)

Brand new set of Clear Fleetside lenses,
installed for about 2 months, no pic's $15


NEEDED

Metal 67 door panels (Prefer Flawless)
8 OR 11 hp Downshaft Motor for my BH
68 Chevy Pass Side front Fender (OE)
Rear floor section from a Blazer / Jimmy

Will there be a car corral or anything for those of us with whole trucks to sell? Sorry if this is out of place
Justin

Yeah if you have the whole truck also just bring it along too :)

planning as hard and fast as i can:metal:

i should have been on this a long time ago :confused:

will we be lucky enough to have any board vendors at the meet?

oh yea I sure would like to find a Blazer or Jimmy project
(hint hint)
See ya at the MEET!

We will be attending again and can bring any parts anyone needs along with us, if you pre-pay we'll knock 10% off all sheetmetal & bumpers and reserve it for you to pick up at the board meet. Don't wait till the last minute though as our inventory rotates rather quick and if we sell out on something before leaving we may not have time to get more in stock.
GMCPaul

I know this is a "loaded" question, but what would be good to bring? I do have a parts truck with a few options on it, that I can take off and bring, dont want to bring anything back, but also dont want to give it away, this will give me some money to donate back to the board, and maybe help my truck as well. What is usually a good seller?

any chevy stuff that fits pick ups ,blazers, suburbans. bring whachagot.

Wil there be a charge for participating in the swap meet? I'm assuming no but figured I better ask.

Yes, you have to buy me a cowl hood and some 99 and Up seats for my 72 2wd Blazer. I know it seems like a lot, but it is well worth the investment. :)

I don't have enough to sell to fund that kind of fee. How about I buy you a Coke instead:sexy:

well, I own and operate a vending business, so I got plenty of cokes :)

Well, then I guess you can buy me one;)

ttt

Had to modify a few items on my list, won't be ride'n on the 17's due to Wife's vehicle breakdown :(

Boss, just a few questions. Do you have a way of unloading large or heavy items such as cabs, front clips, beds, frames, engines, transmissions, or rear ends. If it don't have wheels do we have a way to transfer things from one trailer to another. A tractor with a boom pole works good A tractor with front end loader is good. A cherry picker will work if you have enough concrete area to roll it on. Just checking so I can make plans on what to bring from the outdoors parts department. Will have a list of what I want to sell in the next few days as time allows. Most everything I have is pictured in my photo bucket. Thanks Boss.

My wife was wondering if it would be OK to bring our two small dog's we have a Maltese & a chihuahua?

guys i got tacks, tilts,lots of blazer stuff i can bring,but i only want to take it not bring it back..lol i`m riding with huck and bigj so space is limited.
pm, me an let me know what you need and i`ll price it, and if you want it i`ll bring it!!!
thanks all for all the hard work on this meet, really looking forward to it...

My wife was wondering if it would be OK to bring our two small dog's we have a Maltese & a chihuahua?

Are you selling them in the swap meet? If so I'll trade you a golden retriever :)

If he is house broken you got a deal. just have to figure out how to break the news to my wife. LOL

guys i got lots of blazer stuff i can bring

I need a rear floor :D

I have a 90 Burb 2wd,a 86 burb 4x4,and a 84 blazer 4x4 that i am parting out also :)

Boss, just a few questions. Do you have a way of unloading large or heavy items such as cabs, front clips, beds, frames, engines, transmissions, or rear ends. Thanks Boss.

Ron i will have my brother in laws tractor here with a bucket on it and i have a hoist and we will have alot of members here to lift also.....lol.

I have a bunch of LED (194 style) I'm bringing, a hand full of hot wheels trucks, and a bunch of little crap that I'll probably give away. I also have some POR15 to sell, and I'm sure I'll come up with some other junk.

Ron i will have my brother in laws tractor here with a bucket on it and i have a hoist and we will have alot of members here to lift also.....lol.

Thanks Boss, I ain't worth a plug nickel and have to do a little at a time. I was going to put the cheery picker in the front if it was needed. I am getting the enclosed loaded so should be ready to rumble.

I only have red and blue right now... I'll see if I can get my hands on some amber ones.

Stuff AVAILABLE ~~~~~can bring just about whatever one wants assuming we agree on price and pre pay deposit to guarantee delivery and pickup~~:

Blazer single wall tops with repairable hatch--$225.
Blazer Bucket Seats---$295.
Blazer Rear Seat in Black ----$200.
Blazer inner spare mount ----$ 55. with minor repair
Blazer swing away spare mount ---- $ 165.
Original 67 Drivers Fender - nice ---- $ 95.
GMC Tailgate with full trim in ocra ---- $ 400.
Tach Gauge clusters ---- $ 250. - $ 300.
Original Truck tilt steering columns ---- $ 285. - $295.
Original AM/FM radio (dead) ----$ 175.
4x4 Blazer front axle 373 gears ----$ 150.
4x4 Blazer rear axle 373 gears ----$ 150.
4x4 Blazer PS setup -----$ 95.
Sunvisors--most colors ----no tears---$ 35. pair (black $50.)
71-72 truck front bumper bkts----$25. set
Windshield Wiper arms ---original ----$ 15. a set
Set of 4 --6 lug --15X8--ralley wheels with centers and rims----$125.
NEW 8' Hard Bed cover --3 section--for 88+^ trucks ---$295.
1980 Yamaha QT 50cc moped--runs and looks nice---$325.

More to come~~~~~~~pictures available--first come first served--all subject to pre sale---OR BEST OFFER ON EVERYTHING INCLUDING Jamie and Big J~~~~.

Stuff AVAILABLE ~~~~~can bring just about whatever one wants assuming we agree on price and pre pay deposit to guarantee delivery and pickup~~:
More to come~~~~~~~pictures available--first come first served--all subject to pre sale---OR BEST OFFER ON EVERYTHING INCLUDING Jamie and Big J~~~~.

I want at least half of whatever you get for me and a quarter of what you get for Jamie.:lol:

Okay, Here goes. This is just a few things that I can think of. I know there is probably more and I'll have to come back and edit.

SBC 350 Heads: 33417369...90-up...350..........Gen.I Goodwrench crate motor,"Hecho en Mexico", 76cc...$50

Ramhorn Exhaust Manifolds off of my 2wd Blazer-$40

2 sets of Cadillac Deville Tail Lights-$40 a pair

Gray Console out of a 80's early 90's Chevy Truck-$30

NEED:

One clip for the back of radio delete

4bbl Carburetor GOT IT COMING!!!!!

Decent SET OF INNER FENDERS

4 sway bar brackets that go over the bushings GOT THEM COMING!!!

BIG BLOCK shroud

A few things that I can bring if anyone is interested:

Complete(and I mean complete) A/C from a '69. Good shape- $200
factory steel oil pressure line- good shape- $15
vintage maplight rear view mirror, nice, works-$45
factory 67-72 sliding rear window- $50
New steel American classic blazer tank kit for trucks- Tank, straps, hooks & sending unit- $220 Chevyman has first dibs
I'll be adding more later, if you want pics, just let me know.

A few things that I can bring if anyone is interested:

Complete(and I mean complete) A/C from a '69. Good shape- $200
factory steel oil pressure line- good shape- $15
vintage maplight rear view mirror, nice, works-$45
factory 67-72 sliding rear window- $50
New steel American classic blazer tank kit for trucks- Tank, straps, hooks & sending unit- $220 Chevyman has first dibs
I'll be adding more later, if you want pics, just let me know.

TTT-Added a blazer tank

Here are a few things I am bringing down. This stuff is for the swap meet so if you are interested in something I will bring it to Norwood, NO shipping, pick it up here or there but if you say you want it payment is required within a week .

American Racing wheels - like new - $200!!
http://i27.photobucket.com/albums/c196/jakelamp/wheels.jpg

NP 205 Transfer case, dirty, excellant cond. $50
http://i27.photobucket.com/albums/c196/jakelamp/DSC05471.jpg

Front driveshaft - tight! $35
http://i27.photobucket.com/albums/c196/jakelamp/P6140128.jpg

72 auto steering column $50
http://i27.photobucket.com/albums/c196/jakelamp/P6140127.jpg

Misc Stuff - ask
http://i27.photobucket.com/albums/c196/jakelamp/P6140126.jpg

Misc Stuff - ask
http://i27.photobucket.com/albums/c196/jakelamp/P6140125.jpg

Wing vents - pretty good $25
http://i27.photobucket.com/albums/c196/jakelamp/P6140124.jpg

Gauge cluster with choke - nice $20
http://i27.photobucket.com/albums/c196/jakelamp/P6140123.jpg

Vintage slotcar track no cars $10!
http://i27.photobucket.com/albums/c196/jakelamp/P6140122.jpg

Glovebox doors and applique (SP?) $4 each
http://i27.photobucket.com/albums/c196/jakelamp/P6140121.jpg

Getting closer, make me offers, I want it gone :metal:


I guess my OBO prices are too high :lol:

That or noone needs this crap :lol:

ttt for the other sellers :lol:

Anyone got some good lookin 16 inch 8 luggers.... at a decent price?
http://i27.photobucket.com/albums/c196/jakelamp/wheels.jpg
If these were 8 lug... I'd be all over them like stink on carnies.

I hear you Andy, either 8 lug or 16" and my guess they would be long gone.

Heres what i am Bringing
2 speedometers 10.00 each
Gauge cluster All gauges worked whe in the truck.25.00
2 camper stlye mirrors 20.00 for both.Mirrors are dusty if anyone wants i will clean them and take new pics
Am radio Worked when in the truck. 25.00
Blue Glovebox door. 7.50
GMC hood letters 10.00 (longhorn_Man first dibs)
Heater housing? 30.00 for both inside/outside
Prices are negotiable

Heres more pics.I have more but i am trying to resize them
:edit: I got them resized

Hey James, what day is the swap meet if I can make it down to the meet? Thanks Randy

That would be saturday sir and would be great to meet you there :)

Cory... I'm interested in the hood letters upon seeing them... probably buying them though.

I have a bunch of LED (194 style) I'm bringing, a hand full of hot wheels trucks, and a bunch of little crap that I'll probably give away. I also have some POR15 to sell, and I'm sure I'll come up with some other junk.

I will buy some POR15....as long as the lid dont pop off and give me a buzz..:rolleyes: :lol:

Cory... I'm interested in the hood letters upon seeing them... probably buying them though.

You'll have first dibs.I think i might have another set too .

jeff... that is sooo totally messed up man.
For those not in the know, the photo he posted, is of the trunk of my olf town car. When he and I were at the second Ohio meet in 04, I had a can pop open in the trunk, and while i was hangin out in the car, and driving around in it, I was gettin ... pretty much stoned off my ass. It kinda smelled like old gas, and I had a carb in the trunk.
I ended up drillin a hole in the trunk floor and draining it into mike's side yard.

was there seen that...lol

Jamie... you didn't see me after taking a little *nap* in the car. I woke up and was stumbling like I was totally drunk. Tripped over my tool box, then some other junk, then my own feet. It had to have been funny as hell.

no...lol missed that...

well, i scored an inline power steering pump/brackets, and an inline HEI (off a 250) today.
Now I just gotta figgure what they are worth. :confused:

Put me in line on the power steering pump and brackets

hmmm
Please do not turn this into a for sale or want to buy thread,it is for those coming to the meet only ok.

hmmm

:confused:

:confused:

Longhorn man is going to the meet. I am going to the meet. I was letting him know I was interested in what he had. Maybe I should have PMed him about it but in my excitement I lost my head. Sorry if I broke some rule. Liz I guess you'll have to spank me. (Did I say that?)

Liz I guess you'll have to spank me. (Did I say that?)

:phat:

well we can talk about the spanking later :hm:
I didnt see a problem with the post. I thought thats why it was here, to discuss things we would like to swap at the meet.
:)

I've been a bad boy too Liz!

I see no problem Ron, I would have been more upset if you would have PM'd him and then I get there with the idea I'm going to buy that and find out that you've already snagged it.

That is my ULTIMATE pet peeve. People on the parts board that PM the person instead of replying in the thread.

well we can talk about the spanking later :hm:
I didnt see a problem with the post. I thought thats why it was here, to discuss things we would like to swap at the meet.
:)

Glad to have to offical OK on the post. I wanted to reply to 1LoC10 but it didn't come out that way. I'll shut up now before I get in trouble

I love you,
You love me,
We're a happy family,
with a great big hug,
and a kiss from me to you,
Won't you say you love me TOO!

I love you,
You love me,
We're best friends like friends should be,
With a great big hug,
And a kiss from me to you,
Won't you say you love me too

Somebody get this back on track PLEASE!

Okay, does anybody want to buy my stuff, or more importantly have the stuff I NEED!!!!!!

The reason i didnt want it to turn into a forsale post is not about the meet,anything you have for the swap meet is fine to post here i just didnt want people to try to get around the other rules on the board to try to buy and sell here ya know.

Can one reserve seats to watch the spanking????hehehehe

I want to be on the back row with my head down between my knees trying to find my happy place.

Also bringing:
Remote mount starter solenoid 10.00
Chrome Timing Cover 5.00
If you want pics plz pm me
Sway bar no brackets 20.00 off a halfton 2wd

Can one reserve seats to watch the spanking????hehehehe

Seats? Can we bid on one (a spanking of our own)?

I want to be on the back row with my head down between my knees trying to find my happy place.

if I could do that, I'd NEVER leave the house.

I think no man would leave their house if they could do that

This thread has completely lost its purpose.:tj: Oh the madness....:whine:

yes it has, by the way Andy that's why nobody wants to ride with me. :)

:hi2: Is this meet open to non members as well? I told a good friend about the swap meet today and he would like to ride out with me. He has been looking for a pair of good bed sides for a lwb 68 to 72 fleet side. He also has a 65 swb fleet side he needs a right fender & bedside. Will any one be bringing such items?:fb:

I may not be able to come now. My boss is going to be gone on vacation and I may have to manage the golf course. I'll let you all know asap. Thanks Randy

Non board members attendance at the meet~~~not my place to create policy but a thought to share---we board members do business with board members/vendors with a certain amount of confindence in that we are all honest and fair in our efforts to deal with each other. If a non-board person comes---i would think that a board member should sponsor him/her and take responsibility for their actions. I certainlly would not enjoy having to find out that the butthead from Texas (Blanton or whatever his name is) shows up and sells stuff with poor quality or buys with rubber checks~~would you??
My .02~~~Huck

You can bring a friend, spouce etc. But it is not open to the general public.

:hi2: Is this meet open to non members as well? I told a good friend about the swap meet today and he would like to ride out with me. He has been looking for a pair of good bed sides for a lwb 68 to 72 fleet side. He also has a 65 swb fleet side he needs a right fender & bedside. Will any one be bringing such items?:fb:

I have some doors and other parts for a 65 in the 65 parts forum that I will probably be bringing.