I collect and restore 4-5-6 Chevy Trucks. During the process I acquire lots of extra parts. If you are interested in any of these parts, I will provide pictures, pricing, including packaging & shipping and descriptions for your review.

Let me know if I can help you with any parts for 4-5-6 Chevy Trucks.

Tony Smith
4-5-6 Chevy Trucks
dynamiccontracting@sbcglobal.net
913-207-7789

Need a set of mint Suburban tail light lenses and rear bumper for same. Let me know if you can help. Thanks, Chuck

Chuck:

Thanks for the inquiry, however, I do not have any burb parts. You may try RJ at www.stovebolt.com. He specializes in '60-'66 Chevy Trucks and deals with a lot of suburban parts.

Sorry I couldn't help you and please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Tony Smith
4-5-6 Chevy Trucks

I bought a set of suburban/panel repo taillight lens at the all truck nationals at carlisle a few years ago but can't remember who from..................They were exactly like my origionals but were new.............................rear bumpers for these are pretty difficult to find....................you might check with the bumper boys out of california...............that's where i got my chrome one i have on my burb..............hope this helps.....................Hemmit

Tony,

What do you get for a 3 speed tranny? I have a '66 LWB with a column shift 3 speed and I-6. I am not sure which 6 I have as it is not the original. I am hoping to get the casting numbers from the block today.

I have never sold a 3-speed column shift tranny. If it is in good shape and complete, I would think you could get $100.00 for it, if the right guy came along looking for a stocker.

I hope this helps.

Tony Smith

Let me know if I can help you with any 4-5-6 Chevy Truck parts.

Tony Smith
913-207-7789
dynamiccontracting@sbcglobal.net

LilRed66,

If I cannot find a replacement tranny locally pretty soon, I may come up to see you. I don't want to go through the expense of rebuilding mine, but I am not quite ready to do a lot of mods to go auto yet.

My ultimate plans are to swap in a 327 with either a TH400 or 700R4. I have a 327 that I can pick up for $100 from my brother and I found a TH400 in my mom's shed last week that she told me to haul off if I wanted to. The tranny belonged to an old racing buddy of my Stepdad's who has not been around for about 7 years. Heck, Dad passed away over 2 years ago. I don't know what kind of shape it is in, but knowing the guy who left it, it is in really good shape. Then again, I would like to have OD that a 700R4 would offer.

But, like I said, I am not at that stage yet, so these parts will be in storage, waiting to be brought to life.

It looks as if I may have found a tranny for my truck locally. I am going to check it out tonight. If for some reason this doesn't work out, I will be calling on you, LilRed66.

Any factory A/C parts? I mainly need the firewall heater box but may be interested in other parts. Thanks.
Joshua

Joshua:

Good morning and thanks for the inquiry. I have many factory A/C parts for '64-'66 Chevy trucks, including the underhood firewall heater box, as well as, a complete factory A/C set-up. Let me know what you need and I will provide pictures, description and prices, including packaging & shipping. Thanks for the opportunity and let me know if I can help you with any 4-5-6 Chevy Truck parts in the future.

Tony Smith

Tony, I am having a heck of a time locating a replacement A/C vent for my '65 Fleetside. Any chance that you might have one available? I also would be interested in the price for a factory A/C setup.

Tony, I am having a heck of a time locating a replacement A/C vent for my '65 Fleetside. Any chance that you might have one available? I also would be interested in the price for a factory A/C setup.
funkzilla:

Good morning and thanks for the inquiry. I have a good, used, factory A/C dash vent assembly. I also have a complete factor A/C set-up. I will send you a PM with description, pictures and price, including packaging & shipping.

Thanks for the opportunity and let me know your thoughts on these parts or any other 4-5-6 Chevy Truck parts in the future.

Tony Smith

funkzilla:

Shoot me a PM and I will provide information for th A/C dash assembly and the complete factory A/C set-up.

Tony Smith

I am sending you an email about some parts.

Don't know if email went through? I need a hood and fenders. I have a 63 gmc but I think the 4-5-6 parts will work. Can you email me the pics and price to lawmanadam@hotmail.com?

Still waiting on a price for heater box for A/C and complete A/C unit price. Thanks.
JQ

Really interested in fenders!! Please send pics and prices!

tony , any word on those c-20 emblems, i've been emailing you . thanks

have any project trucks???? starter trucks that aren't in pristine condition?

What are decent doors for a 65 going for? How about shipping to 87120?

I am looking for a big back glass cab, hood and fenders.

Tony, got a couple of these fender supports? (left & right)
thanks, Bill

Ttt - Door $

Anyone heard from Tony lately? I've tried calling him, but just get the answering machine. I left on message yesterday.

Anyone heard from Tony lately? I've tried calling him, but just get the answering machine. I left on message yesterday.

I heard from him a few days ago, Something of having a computer problem. He hasn't emailed me in these few days, but I did tell him to take his time so I didn't really expect one either.

does anyone no where tony is ? i leave messages on his machine , and email him and nothing , i sent him money for parts , where is he .???????????????

looking for polished alum headlight suround for 63 just 1 or 2 . incase of 1 just kikn around your 456 parts.

you back yet?

I specialize in parts for 4-5-6 Chevy Trucks. My shop is located in Kansas City, KS. I buy/sell/trade all parts for 4-5-6 Chevy Trucks. I will provide pictures, pricing, including packaging & shipping and descriptions for your review.

Let me know if I can help you with any parts for 4-5-6 Chevy Trucks.

Tony Smith
4-5-6 Chevy Trucks
dynamiccontracting@sbcglobal.net
913-207-7789

This "66 farmer" is new to this site. Am testing my ability to move around the site. I've got a 66 Chevy pickup that I'm currently working on.

Am looking for 1964 Chevy fleetside front fenders, doors, front bumper, hood hinges, and passenger bed side. Also looking for front inner fenders. If you have a good parts truck for sale, how much for the whole thing? Or just the individual parts listed. Some pics please. I would come up and get the parts if the price is right. :) Thanks!

Am looking for 1964 Chevy fleetside front fenders, doors, front bumper, hood hinges, and passenger bed side. Also looking for front inner fenders. If you have a good parts truck for sale, how much for the whole thing? Or just the individual parts listed. Some pics please. I would come up and get the parts if the price is right. :) Thanks!

As far as I know, nobody's heard from lilred66 (Tony) since October

I talked to him a week ago, he was having his first born and his computer was down. I have some parts ordered from him too, hopefully he'll be back soon.

Okay...hopefully he gets back soon...really needing parts. :)

I just got back online today. Sorry for the temporary absence.

I just got back online today. Sorry for the temporary absence.

Welcome back! Hope everythings well!!

sent you a pm about the dash

bobbo:

Thanks for the inquiry. I have lots of parts and a few good, used parts trucks. Since you are in Springfield, MO and my shop is in Kansas City, KS, you may want to make a trip up to the city and check out my parts inventory. I have all the parts you are seeking, however, due to the number of parts you are looking for, it may be better to see them in person, instead of trying the photo thing. Let me know your thoughts and I will proceed accordingly.

Tony Smith

foedoeblaza:

I have a dash that is out of the truck, that is in excellent condition, in red primer. It is $175.00.00, plus packaging & shipping. I also have a few that are not removed from the truck and will have to be removed and dismantled, including drilling out of all spot welds at the windshield. It is $175.00, plus packaging & shipping, due to the amount of labor to remove and dismantle it. Let me know your thoughts and I will proceed accordingly.

Tony Smith

bump

Tony:

I need a decent driver side rear trailing arm for a 61 fleet shortbed. Hope you can help me out. Thanks.

Daniel

Daniel:

Thanks for the inquiry. I have a few of those devils in my inventory. I will send you a PM with the price, including packaging & shipping to Sandusky, OH.

Please let me know if I can help you with this item or other 4-5-6 Chevy Truck parts in the future.

Tony,

Do you have an AC center vent for a 64-66 C10? If so, any pics and how much shipped to 36507? BTW, your PM box is full.

Thanks,
Tim

Here are a few pictures of the factory AC dash diffuser I have. I will send you a PM with price. Thanks for the heads-up about my mailbox beingfull.

Let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.

This is probably a silly question but is there a piece that attaches to the rear of this that actually directs the air to each vent? If there is do you have this piece also or maybe a pic of what it might look like?

This is probably a silly question but is there a piece that attaches to the rear of this that actually directs the air to each vent? If there is do you have this piece also or maybe a pic of what it might look like?

Tim:

The factory AC setup for these trucks is rather extensive. There is a plastic plenum box, including the three dash control knobs and bezels, that backs up the AC dash diffuser, as well as, an underdash heater box diverter assembly, that is located under the dash, as well as a compressor, condenser, air dryer, brackets, hoses, hardware and wiring harness, that is required to make a factory system complete.

I have a complete assembly, if you are interested. Let me know your thoughts and I will proceed accordingly.

Tony,

What I'm planning is to go with an aftermarket AC (haven't decided which brand yet) but I want to use an original center diffuser for the "factory" look. I just don't like the way the aftermarket vents look. I guess I'm just trying to get a mental idea/picture of what it will take to make this happen and any additional parts that I may need besides the diffuser. Thanks for the quick responses and I will get back to you soon on the diffuser panel.

Thanks,
Tim

could i get a price on a hood new or used, rust free

thanks,
L Zember

A good, used, rust-free hood shell is $200.00, plus $175.00 to crate and ship. Due to weight, size and bulk, shipping a hood is not very economical.

How about a good fleetside tailgate and shipping to 75468?

Thanks
Brad

Interested in an original steering column for a floorshift vehicle (1964). PM me if you have one.

MikeN:

Thanks for the inquiry. I have a few floor shift columns available. I will send you a PM. Thanks again for your interest in 4-5-6 Chevy Truck parts.

ItsNotABlazer:

Sorry for my delay in responding. I will send you a PM regarding a good, used fleetside tailgate. Thanks for your interest in my 4-5-6 Chevy Truck parts.

Tony just wanted to say I have a great deal of respect for you of your knowlege on 4-5-6 chevy trucks and your share it with us all on this forum.I love learning new stuff on 1960-66 chevy/gmc trucks . thank you 283 Man:chevy:

Morton (283 Man):

Thanks for the kind words. I am equally appreciative of the forums members, that do know more than me, for sharing their knowledge and insight.

Need any 4-5-6 Chevy Truck parts?

I will keep you in mind in future I sure Ill will need something on 4-5-6 parts your not far from me at all only about 2 hours away. thanks Tony

283 Man:

I haven't gotten rid of the '63 yet, so I wanted to let you know I haven't ruled out doing a partial trade for parts and cash. I will keep you posted.

Hey LILRED, do you have a posi unit for my 65' 12 bolt?

Thanks,

ron19:

I have several '64-'66 Chevy 12 bolt rearends, however I don't know if any of them are posi-traction. With the cost of shipping, it is not economical to ship, so you may be better off finding one locally. Sorry I couldn't help you, but please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Actually, I wouldn't want the whole rearend, just the carrier with the posi unit. But that would involve a bit to pull the unit out and then ship. I understand if you don't want to go that far with it.

Thanks for all your advice, it does help.

There is a plastic plenum box, including the three dash control knobs and bezels, that backs up the AC dash diffuser

Sorry for not getting back to you sooner Tony. My next question is about the plenum box. Is it an assembly that includes the dash knobs or is it just a box that directs the air to the diffuser? Sorry for the simple question but I have never personally seen an original A/C setup and want to make sure I understand exactly how it is set up so I can purchase the right parts. Also, can you PM me a price on the plenum box. I definitely want the diffuser (if you still have it) and possibly the plenum box too. Thanks for being patient with my basic questions.

Thanks, Tim

Tim:

You have a PM regarding the plenum box and other parts you inquired about. Let me know your thoughts and thanks for your interest in my 4-5-6 Chevy Truck parts.

Hey Tony, for some reason I didn't receive a PM. Could you resend please?
Thanks,
Tim

Hey Tony, for some reason I didn't receive a PM. Could you resend please?
Thanks,
Tim

Tim:

PM resent.

Spring has sprung...it is time to rev up and get the 4-5-6 Chevy Truck back on the road. Let me know if I can help you with any 4-5-6 Chevy Truck parts.

Do you need parts for your 4-5-6 Chevy truck project? If so, let me know and I will provide pictures, description and pricing, including shipping.

We buy/sell/trade lots of 4-5-6 Chevy Truck parts, so let us know if we can help you with your parts needs.

I have recently acquire a few 4-5-6 Chevy parts trucks, so please let me know if I can help you with any 4-5-6 Chevy truck parts in the future.

Tony, got buddy on classic parts forum needs a horn ring sterring wheel for 64-66 chevy truck hes all the way from Belgium he tryed e-mail you once thur 4-5-6chevytrucks@sbcglobal.net he said he couldnt get hold of you and I just e-mailed him back told him give me couple of days and Id get hold of you.His name is Johan(dijoo comp name).Going send you some business too hope you dont mind. Thanks, Morton:chevy:

I was wondering if you have any carbs. for my 305E V6?? It's probably a long shot. Or a Stromberg 23-176B Carb?

Tony, got buddy on classic parts forum needs a horn ring sterring wheel for 64-66 chevy truck hes all the way from Belgium he tryed e-mail you once thur 4-5-6chevytrucks@sbcglobal.net he said he couldnt get hold of you and I just e-mailed him back told him give me couple of days and Id get hold of you.His name is Johan(dijoo comp name).Going send you some business too hope you dont mind. Thanks, Morton:chevy:

Morton:

Thanks for the heads up. I will check that e-mail and reply accordingly. Thanks again for the business.

I was wondering if you have any carbs. for my 305E V6?? It's probably a long shot. Or a Stromberg 23-176B Carb?

Unfortunately, I don't have any parts for the '60-'66 GMC trucks. Sorry I couldn't help, but I appreciate you keeping me in mind for other 4-5-6 Chevy truck parts in the future.

Thanks Tony happy to help send you business.

Any of those trucks have factory A/C? If so, I'm interested in the setup.

Pete

Tony,
Do you have any door mirrors?
Thanks,
Tim

howa bout a new or mint condtion hood for a 1965 chevy

please sen me a price with a few pics at loganzember@hotmail.com

:chevy:

thanks