I am looking for some 3/4t. hubcaps from '62-'67 that will fit these 8-lug wheels. The inside of the cap ring will measure about 9.0 inches.

The back of the cap will look like these but the one on the right is a 1/2 t. cap and measures about 8-inches.

stllookn:

Good morning. I have the factory caps you are looking for. I will double-check my inventory. I believe they are for the eight lug 3/4 ton factory wheels with clips. They are the painted variety. I will check and let you know.

Tony Smith

Tony, Thanks...any year will do. Hub caps are like ties...one for each day of the week...LOL!

I have a set of driver quality painted ones that come off of a set of 8 1/2 inch wide wheels. I think the truck was a 68. Let me know if you want more info, Eric

Here is a set of three bowtie caps and one GMC cap. I would consider them daily driver quality. They are 9", so they fit the factory eight lug wheels with clips. Take a look and let me know your thoughts.

Tony Smith

Here is a set of three bowtie caps and one GMC cap. I would consider them daily driver quality. They are 9", so they fit the factory eight lug wheels with clips. Take a look and let me know your thoughts.

Tony Smith

I know this is an ancient thread but did you sell these to stllookin or do you have more like this?
Please and sorry to hijack!

Good morning and thanks for digging this one up. I still have a complete set of four, so let me know if these fit your application and taste.

Don:

The only two sets I have are for the eight lug wheels, so I am not going to be able to help you with the six lug caps.

Sorry for the mishap.

Do you have a picture of these caps? I do have the eight lug wheels. Shouldn't matter but mine is a dually... let me know how much.



Don:

The only two sets I have are for the eight lug wheels, so I am not going to be able to help you with the six lug caps.

Sorry for the mishap.