Hey from Boise Id, parting out this beauty! I took the dash and windshield, it might even run! please inquire if you need any parts off of it before it turns into a trailer! thanks-Mark zmtgoat@hotmail.com

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1102.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1103.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1109.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1108.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1104.jpg

please dont turn it into a trailer!!! To Good of a truck to make a trailer..

how much for the tailgate ?

please dont turn it into a trailer!!! To Good of a truck to make a trailer..

this thing is beat!!!!!!!!!

wish you lived closer is that a 283 motor or 327 motor?

I agree still live in that truck:metal::metal:

That truck is in too good of shape to turn into a trailer.Someone please buy it and spare it's life :)
If we were closer I would scrape up the loot to take that truck off your hands.Even if it just sat in the back yard lol
Good luck eitherway man

myself also but idaho is SOOOOOO far away...

If you're still gonna part it out, do you have these?

If you're still gonna part it out, do you have these?

ill try to get the fenders off this weekend and see if theyre intact!!

how much for steering colum?

What about the headlight support surroundings? Not sure of the proper name. Please send PM, thanks.

Is the radiator any good, and if so how much?

Also wanted to ask about the pulley system off the motor.

how much for the tailgate ?

im keeping it with the bed.. its a trailer.. -Mark

If you're still gonna part it out, do you have these?

yes i have all of them!! they are a little trusty but not thrashed!! ill get a pic up tomorrow!!

Also wanted to ask about the pulley system off the motor.

it has just the crank, water pump and alternator.. ill get a pic tomorrow!

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1588.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1590.jpg

http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1587.jpg
this cab is in pretty good shape, rusty on the bottom, the top is good, i have to get rid of it!! if you need any parts off of it let me know!! thanks-Mark

wish you lived closer is that a 283 motor or 327 motor?

casting number 3970010.. 350

how much for steering colum?


shrug dunno.. how much is it worth? itl be a long box to ship it it!! it seems pretty tight tho, not alot of slop on the top or bottom, the turn cancelers work, do you need the whole thing down to the box or can the shaft be cut? let me know!!
-Mark

Bought another one thanks!

yes i have all of them!! they are a little trusty but not thrashed!! ill get a pic up tomorrow!!

okay great. also a price with shipping to zip 24066 thanks

okay great. also a price with shipping to zip 24066 thanks

they are welded to the fender correct?

How about the radiator. Is it any good, I need one for my 66.

here are a couple pics of the radiator, i just pulled it, it had alot of good green anitfreeze in the bottom half, the fins look really good! there are a couple spots where it looks to have tiny leaks, nothing blown out tho, no huge visable cracks.
i can ship it when i get a box, id have to sell it as is only cause i never had it running, probably couldnt hurt to have it tanked and pressure tested
let me know!!-Mark
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1595.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1593.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1591.jpg

If you're still gonna part it out, do you have these?

bummer.. i just took off whats left of those pieces.. there is prettymuch nothing left of them

here are a couple pics of the radiator, i just pulled it, it had alot of good green anitfreeze in the bottom half, the fins look really good! there are a couple spots where it looks to have tiny leaks, nothing blown out tho, no huge visable cracks.
i can ship it when i get a box, id have to sell it as is only cause i never had it running, probably couldnt hurt to have it tanked and pressure tested
let me know!!-Mark
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1595.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1593.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1591.jpg

How much for it with shipping to 32514?

I could use the right side cowl piece that the antenna bolts into. How much fir it shipped to 40601 KY? Thanks in advance.

Bryan

What about the headlight surrounding supports? Do you want to get rid of them? Thanks

they are still on there!! ill see if i can get them off tonite!!

BUMP! Still awaiting on an answer, thanks.

I'd love to get a GMC hood; Im guessing shipping mite be prohibitive..any idea? There mite be one floating around the phoenix area.

I'd love to get a GMC hood; Im guessing shipping mite be prohibitive..any idea? There mite be one floating around the phoenix area.

hey! ill get some pics of it up tomorrow.. i honestly dont think its worth shipping.. i can prpbably get a box and shipping quote if you are still interested after i send pics..lol

Im curious........if you have some pics available. I see its dented up a bit; is it rotted, also? Thanx, Jeff

How much would you want for the grille with headlight buckets?

would need to ship to 76250 area code.

Thanks :chevy:

how much do you want for the insterment gauge cluster?

Do you have the steering wheel? How does it look? Could you send a picture?

I realize I'm a newbie and you guys don't know me from Adam, but I just wanted to say that Mark aka MacSic66 is a stand-up guy! I was looking for a passenger side engine perch to swap a sbc into a '64 Suburban in place of a tired old 292 and Mark went out of his way to send me not one, but two sets of perches! Dealing with Mark is what later prompted me to join up here. Thumbs way up! Thanks again, Mark!

Mike

how much do you want for the insterment gauge cluster?

the gauge cluster was shot.. sorry..

Do you have the steering wheel? How does it look? Could you send a picture?

i have a stock wheel of my 66' chevy.. would you like pics of that one? is it the same as the gmc?

How much would you want for the grille with headlight buckets?

would need to ship to 76250 area code.

Thanks :chevy:

the grill isnt in that great of shape.. pm me with ur e-mail and i will send some pics!! thanks-Mark

For sale!!! 1966 GMC/Chevy tailgate trailer in boise area! New 2"ball hitch, new safety cables, new u-bolts, tires hold air, it has overload springs, new jack.. just needs wiring! PM me if ur interested! OR trade for a set of 15x10 6lug truck rallye wheels??
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1679.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1678.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1677.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1676.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1675.jpg

how about the radiator support? do you still have it, what kind of shape is it in?

how about the radiator support? do you still have it, what kind of shape is it in?

Hi! i dont have it, it was rotted completely out, i have the top radiator hold down piece if this helps? thanks-Mark

here are a couple pics of the radiator, i just pulled it, it had alot of good green anitfreeze in the bottom half, the fins look really good! there are a couple spots where it looks to have tiny leaks, nothing blown out tho, no huge visable cracks.
i can ship it when i get a box, id have to sell it as is only cause i never had it running, probably couldnt hurt to have it tanked and pressure tested
let me know!!-Mark
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1595.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1593.jpg
http://i100.photobucket.com/albums/m37/McIvermark/Hundred%20buck%20truck/IMG_1591.jpgMARK I'm looking for the support panel in front of the radiator
Thx

MARK I'm looking for the support panel in front of the radiator
Thx

Sorry! it went to scrap a couple weeks ago.. sorry- Mark

Mark-
Any e-brake cables/hardware there?
I need what's show in red:

Is the tranny cover available?

Mark-
Any e-brake cables/hardware there?
I need what's show in red:

sorry all that stuff is long gone! -Mark

Is the tranny cover available?

i have two.. do they make a tall and short for this year? -Mark

Hello,i need the plug on the headlight harness that passes through the radiator core support, also need the rear tail light harness, if you want to sell it? Thanks, joe

what do you want for the cab?

I need the battery box, if its still there. Price and shipping to 70739.

If you still have the steering column - I'm interested.
Kevin

Hello,i need the plug on the headlight harness that passes through the radiator core support, also need the rear tail light harness, if you want to sell it? Thanks, joe


hey! sorry, i dont have the front, the back stayed with it for the trailer wiring, thanks-Mark

what do you want for the cab?

the center of the floor is cut out, other than that its fairly straight, it needs rockers, corners, front supports, back supports too i think...
dunno.. if you come and get it hows 20 bux? -Mark

If you still have the steering column - I'm interested.
Kevin

yep still have it! pm me to figure out pricing and shipping! thanks-Mark

I need the battery box, if its still there. Price and shipping to 70739.

i have it, pm me your e-mail and i will send you pics to figure out a price! thanks-Mark

throw in the doors and a tall trans tunnel? pm me and we will work a deal.

thanks anyway

i have two.. do they make a tall and short for this year? -Mark

There is a high and a low tranny cover. I need the high, that came with the factory four speed on the floor transmission. My shop is in Kansas City, KS 66105.