Ok Folks, I did the conversion from Drum to Disc and have some parts left over I will list what I have and post pictures that I have. I will post more pic's as I get them.

1 set of NEW never installed 2" drop spindles 60-62 $200 plus shipping.

1 set of two used 15 x10 6 lug chevy Smoothie's with caps. They are excellent $175 plus shipping.

1 Master cylinder and booster NEW never installed, master is disc/disc master and $200 plus shipping.

1 Proportioning valve NEW Disc/Disc $50.00 plus shipping.

1 Proportioning valve New Disc/Drum $ 50.00 Plus shipping.

1 USED 60-62 master/hyd clutch cylinder with both rods $35 plus shipping.

2 Front drum brake assy's Spindles, drums, shoes, bearing's, they are complete, everything from bearings outward, I just popped off the spindles and disconnected the brake lines. $60 plus shipping (These are heavy) Make me an OFFER.

4 15"x7" 6 lug steele wheel's came off my 68 C10 Currently have some tires on them that are about used up. I would like $100.00 I will have tires taken off unless some one wants them too. of course plus shipping.


I will send pic's out to whom ever want to see anything. I will update this later today as I get pictures.

Thanks.

First pic is of the 15 x10 6 lug smoothies.

I will get pic's pf the other parts as soon as I get some sun light.
Thanks..

I would love to have a swb frame to put this stuff on and my cab and doghouse. My '65 is a 1ton 155" wheelbase. You are close enough though.
Latr fellow kentyuckian

Wheels are sold Pending payment..

I'm guessing you don't have a master for the brake and clutch (like the 62 has) that is boosted?

Ok what I have found from my 61 burb. The clutch cylinder is not boosted, the only difference id that the mounting bracket for the one with the 60-62 with the hyd clutch is narrower than the standard one. This one is the one I bought before the truck shipped to me and when i opened up the hood...lookie there a hyd clutch cylinder.... so to answer your question No this doesn't have the hyd clutch cylinder...I thought about buying a clutch cylinder myself but couldn't find any pic to see what it was set up like.... I know now I spent the money on one from CPP... looking at it now I think I could have done it......

CPP (and someone else) sell the combined unit - but it's $450. That's the one I'll be getting, bummer it's not the one you have.

Thanks.

No matter where you buy it from it make the whole Hyd clutch a whole lot easier. I will tell you this.. no matter who you buy it from it comes from CPP even the ones that you see in the LMC catalog is from CPP. You will like it.... Are you going to keep the 6 lugs? I converted the front of mine still haven't startred on the back yet so i'm 5 up front and 6 in the back.... if you want a good highway gear for your truck check out Patrick's (just google Patrick's) it's the first ont that comes up. He has a 3:38 ring and pinnion for 200 pluss shipping and it is made for our year trucks... that is the next thing I'm going after once I sell some of this stuff..... Good luck...

Pay no atention to that filthy engine compartment....Wayne Finned alum valve cover & side plate is waiting to go on along with a set for ceramic coated headers and a dual carb intake.... it's going to be a cool ride..

1 Master cylinder and booster NEW never installed, master is disc/disc master and $200 plus shipping.

1 Proportioning valve New Disc/Drum $ 50.00 Plus shipping.



I know I'm probablytoo late, but would you happen to still have these?

Everything is gone, If your truck has a HYD clutch you would be better off with the power booster & master cylinder/hyd clutch master. I believe the CPP is the only vendor that has one and all the rest of them are purchased from CPP and resold IE:LMC and CLASSIC PARTS.

These are very simple installs and make it easy but Cost about 500-600.

Nice truck you have there...
Good luck..