This is only for people who are attending the meet. Please don't try and use this as a way of getting around the site buying and selling rules. We want your,

Complete running trucks

Projects

Parts trucks.

Parts of any kind.

Post up what you have and what you might be looking for. We have on site tractors and loaders to move any heavy stuff you want to bring. Josh or Liz if you need to edit or add to this be my guest.

I'll be looking for a fleetside tailgate.

Maybe a rear sport bumper & brackets.

Not sure what else yet or if I have anything worth bringing up to sell/swap out.

List below is stuff that I can bring, not bringing it all :lol:

ALL PRICES ARE NEGOTIONABLE, LET'S TALK

I will edit THIS post as I add to it

4 SALE
$6750 "Merlot" 1971 GMC Jimmy 2WD
$5000 F-150, 1997, 90K, Loaded, Teal
$1250 OEM Blazer/Jimmy rear bedsides
$800 Fenders, Rad, Cowl Hood, Grill 71/72 SOLD
$600 Extreme Bend Tow Hooks (PCoated)
$160 Bumper 71/72 w/ clear lenses/buckets
$100 New SS Tailgate top rail protector
$80 Radio delete cowl (Ready for paint) SOLD
$40 Firebird Side marker bezels (4)
$40 Blazer seat backs (DD quality)
$40 SBC A/C Brackets (5 out of 6)
$40 Front bumper brackets 71/72 4wd
$20 Sport Bumper bolt on hitch
$10 PS pump only (No brackets)
$5 Misc frame brackets (Each)
$0 Rear seat from a full size van

(Only available if I sell "Merlot")

WTB
68 Right fender OEM
67/68 Hood latch
67/68 Grill Support
67/68 Spash Pan
67/68 Grill Inserts
BB Trans Hump

I can bring some parts only if someone shows interest beforehand. Also if you would like pics I can do that too. I hate to haul stuff with no one interested in the stuff. So I need a 90% probability you want it before I haul it.
Off of my
71 GMC L/H & R/H fenders. Great drivers shape not perfect $100 EA or offer
68 Core support. Had a rust issue below the Battery. Been repaired. Decent Driver quality as the repair cannot be seen after battery install. $100
Brand NEW in the Box GMC L/R SET Chrome headlight bezels $125
Original Underdash A/C Unit aftermarket Installed dealer item $125
68 GRILL excellent shape one very small dent size of finger nail, no rust, has trim holes & parking lights. $125
Evaporator that fits in front of your Radiator for A/C $35
Misc heater a/c plumbing & underdash heater pieces Make a offer
A/C engine bay heater core cover not broken $40
Standard heater Core used no leaks $15
Stainless Chain set for step side T/G PR decent quality $30 being replaced with hidden hinges & pins
Step side round Lens for tail lights used 1 week I replaced with LEDS $20
Fleet side Tail light Lens used 1 month was replaced with LEDS $25

Much more stuff here in the garage just ask. Redone 4 trucks last year.
Even have auto crossmember's at least 2 maybe three. If you need a pic let me know.

I have a few parts for sale. I'll be bringing a bunch of small stuff thats too much too list , This is the big stuff.
70 inner grill $50
4ea. 8'' truck ralleys 2 caps 4 rings mismatched $100
69-72 right fender $40
windshield cowl $35
67-68 splash pan $20(craig gets first look at it)
ramshorn manifolds $40
auto crossmember$40
top & bottom trim for lwb
ac compressors-only bringing if someone expresses interest.
if you need something pm me.



need a console lid w/hinges

I am in need of a GMC Tailgate Fleetside. Looking for something in good condition with no/very minimal rust. Also needing LOTS of misc interior parts (Heater Control head, dome light, glove box insert, defrost ducts, etc)...Also would LOVE to get some LEDS! :)

Bobbo, what type heater control (AC or just heat)

Same for glove box insert (AC or non AC)

I have both for Non-Ac model

I am considering parting with my pretty darn nice GMC gate... but dunno if I have the nads to part with it.
The dang thing is worth more than my trucks combined. (ok, maybe just more than the longhorn)

67-68 splash pan $20


Can I get pic's of this?

For Craig

more

I think I want that, anything that I can not see in the pic's?
(Cracks, rusted through holes, bent mounting areas, etc...)

Craig I don't see anything but I will mark it with your name and you can look at it up close first. If you don't want it maybe somebody else will. Chuck.

Stuff I could bring to the meet if anyone wants to buy.

'65 original 283 runs $500
'68 original 350 runs but needs overhauled $250
'68 350 overhauled, new crank, cam, bearings, everything $1000
4 duece setup w/manifold $1500
original chevy fleetside tailgate w/ 1 small dent $300
th400 don't know any history but worked when pulled $300

RON 586 I feel I may need a guard dog. UNCLE is delivering a set of buddy buckets for me. Can't believe I finally may have a set. Do you have a spare mean dog or coon dog? hahha

Bobbo, what type heater control (AC or just heat)

Same for glove box insert (AC or non AC)

I have both for Non-Ac model

The non-A/C is what I need. :)

The non-A/C is what I need. :)

I haver a non a/c heater control and the stuff to rebuild it too. I just got home from a trip so I'll have to dig all the stuff up if your interested in a good rebuild able one.

I also have 2 new glove box inserts for a non-AC truck.

RON 586 I feel I may need a guard dog. UNCLE is delivering a set of buddy buckets for me. Can't believe I finally may have a set. Do you have a spare mean dog or coon dog? hahha

All my dogs are laid back and cool. I could let my bull dog wife guard them however. She's the meanest one of the bunch. :lol:

I'm sure Ron's armed :)

All my dogs are laid back and cool. I could let my bull dog wife guard them however. She's the meanest one of the bunch. :lol:

umm I'm going to pretend I did NOT see this :eek: :lol:

:haha:

All my dogs are laid back and cool. I could let my bull dog wife guard them however. She's the meanest one of the bunch. :lol:

I contributed to the meanness... She was nice until my teen years...:lol:

I haver a non a/c heater control and the stuff to rebuild it too. I just got home from a trip so I'll have to dig all the stuff up if your interested in a good rebuild able one.

I also have 2 new glove box inserts for a non-AC truck.

I am definitely interested. :) Will see ya there!

Anyone needing a TILT column? I have a van tilt and a real truck tilt.
I can only bring one, because I will use the other one in my driver.
(Van tilt currently installed, but I will pull it if anyone wants it).
I can get pics if needed.
I take cash and trades. I am looking for a set of wheels for my commuter car. It is 4x100 lug pattern. I need aluminum 'ricer' wheels on it. It's an Integra.

Also, who can hook me up with a COWBELL T-shirt????

Send me a PM about the Van Tilt

Where do I start?:
Really nice fully trimed original GMC tailgate $350.
Single wall blazer tops--Black no hatch--$100, white w-hatch $150.
Blazer swing away spare mount $150.
Blaz inner spare mount $75.
Truck AM/FM non working $185.
3 piece hard long bed cover new$250.
Blazer sun visors $65
Truck sun visors $35 & Up
NP205 with match T350 auto $450.
Console belt or cup--$75 & up
Tach dash $275.
More to come~~~~Huck

*IF* I am able to bring the burb, I'll have a van tilt and a real nice GMC gate, and a bunch of little stuff.

*IF* I am able to bring the burb, I'll have a van tilt and a real nice GMC gate, and a bunch of little stuff.

dude get to work..

PM sent. Photos pending on Monday.

I will have my 4x4 for sale and can deliver it to the meet if anyone is interested in it.i will consider all trades also.

I have assorted parts in nice condition I could bring to the National meet if anyone needs something.
I don't remember what all I have and how to work this listing just for the meet.
Front, rear(burb) and back barn(burb) doors. Inner fenders for 73-80. core support from 79 and one from 81-87. Gauges, bezels, etc.
If there is any interest for me to load them up, I will put a list here with prices. And I can take pictures.
This is just for the meet at Ron's

stuff that i can bring to sell
69-72 tow hooks
van tilts (3)
tach dashes
or any other small stuff, as i`ll be in tenn until the 17th and would hate to haul this stuff, so if intereseted send pm.

Is any of the GMC tailgates the 67 small lettered style?

I have a 67/68 core support for $50 if any one needs it.

I have a very nice set of 6-lug center caps for ralley wheels. All 4 are closed centers (use on 2wd trucks)
These are not metal, so there is no pitting. Never put logo in centers, so you can make them GMC or Chevy.
$30 (delivered of course)
Or will trade for late model 6-lug centers

I have a 67/68 core support for $50 if any one needs it.

i may want this depending on pics

I'm needing...

gas tank that doesn't smell so much like varnish when you take the cap off (sending unit would be nice too),

NON-AC heater control

outside rearview mirrors

back-up lights for a stepside

Horn button stuff



I'm Bringing...
2 doors...a left and right off a GMC they are in decent shape I think one (maybe both) have a speaker hole cut out.

Some body molding that the guy threw into the back of my step-side that I think actually goes with a fleetside (its oxidized but other than that I think its pretty straight)

The panel that goes between the grill and the radiator support, is it called a "splash guard"??

IF I can get steering columns swapped by then (at least get it out) I'll be bringing a NON-tilt three-on-the-tree, the shifter is gone but I think everything still works

What ever else I can find laying around...my brother-in-law runs a transmission shop and usually has a couple laying around if anyone is interested just let me know and I'll see what he has.

If anyone is interested I'll work on pictures

Anyone have a good deal on some drop springs, spindles, blocks, etc...?
Sure would be easier to enter/exit if it were closer to the ground.

Got a nice pair of stepside fenders--$495. pair
RC Sailboat--for the pond--3ftx5ft new in the box--just tie a lure off the back and catch dinner!!hehehehe

Wanted: rust free, straight, no bondo---67-68 rad support, 67-68 hood, 68 fenders, doors.

Will trade, sell, buy, etc.

Brock, i have some horn button stuff I'll be bringing.

Sounds good on the horn button I'll look you up there

Robb, I'll get you picks of the radiator support by the weekend. :5150:

I also have a roll pan for a stepside that I made. It goes funder-to-fender instead of hanging below the tailgate. Since the photo, I have added LED strips from behind for tail lights. It can be bolted in or welded & smoothed.
I am asking $100, but will work with trades, etc....

Time is getting short the meet will be happening. Looking for ...3" rear drop springs, ralley deep beauty rings, and have stuff to trade. See previous posts for other items. Here are a few PICS of stuff I maybe willing to cart to Tn meet. Also have a power steering gear box, 2-barrel intake, 2-Brl carb & stock air cleaner with new filter off a 307. Good stock rebuilt carb not junk. A 4-barrel stock air cleaner. Plus more stuff just ask.

Less than 2 weeks :metal:

Yeah!!!:metal:

I am attaching pictures of some of the stuff i could bring to the Nat meet if someone attending it is interested. I have a lot more. If so, I will list prices .
As the pictures show, the stuff has been sitting for a while collecting dust.
the exhaust manifolds are new, the doors are power windows.
Most everything is at least daily driver good or better. If it was crap I threw it away. I will put one more post with 5 more pics.
Again, this stuff is only for sale to those that will be at Ron's because this is what this thread is about..

more pics

I am looking for a real nice Alimumin ??sp Dash Bezel for a 1986 with air

Tim, in case I don't get to call please add to the stuff you are bringing me a

1968 2" Steel Cowl Hood
Inside and outside door handles and linkages, and window regulators for 68 doors you are bringing.
A chevy step side tailgate for the 68. I have a GMC gate for you to look at as possiable trade.

Will try to remember more and add but understand that you might not have it on short notice. Thanks.

Here are the photos for 5150.
Van tilt (currently in daily driver). Works great, no binding. Steering wheel NOT included.

Here are some requested pics plus a couple of AM rados, unknown if they work but have at least the correct knobs, they take a bad pic they are decent in looks, $15 a piece. A chrome 350 oil pan $10. $25 on the gear box, $125 on the GMC support. Any interest let me know beforehand because it will be staying home to make room for a truck load of Southern TN Gals. Haha

More pics.plus if anyone is interested I have a pr of front fenders off a 71 GMC real decent Stock L/R asking $225..

what shape is the oil pan in?? i might want it.

jamie72, it has been installed before & still has gaskets stuck to it. But not beat up or dented. Not perfect but not rusted either. The guy I got it from said his son had it on his engine 3 months before he totaled the vehicle.

That a manual box or a power?

Is it for 2wd or 4wd?

Cost?

$25 on the gear box
Power. 2-wheel drive.
(Or at least that is what he told me)

Im gonna bring a 71-72 left fender(light rust), new euro clear side markers, new red/amber Cheyenne side markers, new red taillight lens, used clear side glass and what ever else I can dig up, think dad had a new sliding back glass

Power steering gear box/pitman arm attached Tie Rods were cut off with a torch off a 70 C-10..$25...To be safe since it has sit for a couple of years I would replace the seals unless you wanted to chance it. It was full of fluid when it was removed.

Putter

How much space am I reserving for you in the truck? ;)


Only kidding...we got plenty of room.

Biggest thing so far is a tilt column & roll pan.
But George wants us to transport his wheels back in case he can't make it.

Bump

Here's a pic of the 67-68 Radiator Core Support -$50. I think Robb had first dibs because he asked about it.

Also here's a pic of the 2000 Fullsize Chevy Truck Bucket seats with Console. Power Seats and Lumbar-Board Meet ONLY price of $275. I'll even bring them to you.

There is also a pic of a FREE pile that I have if anybody needs this stuff:

Blazer Tank
Rear Coil Springs
Factory Steering Column
Rear Brake Assemblies
Front 71-72 Bumper Brackets
72 Cannister
Manual Steering Box

I also have one of those wet sandblaters that you hook up to your pressure washer. Bought it at Northern Tool for $75, but I'll let it go for $50. Used for about 15 minutes and realized I needed a professional :) Also have a 50 or 80 lb. bag of sand to go with it. Can't remember the weight.

I also have one of those wet sandblaters that you hook up to your pressure washer. Bought it at Northern Tool for $75, but I'll let it go for $50. Used for about 15 minutes and realized I needed a professional :) Also have a 50 or 80 lb. bag of sand to go with it. Can't remember the weight.

Bring it along, I'll grab that from you.

Biggest thing so far is a tilt column & roll pan.
But George wants us to transport his wheels back in case he can't make it.

No Problem, I need to pick up a tranny from George's (Krue's old T350) someday too.

Got it Bill, it's sold to you.

Hee are some items I can bring if folks are interested. I may not bring them if there is no interest though.

88 Style Chevy Truck Steering Wheel - $25.00

Grey Dash Pad – New - $ 50.00

Steering Column (Floor Shift)-$30.00

Urethane Stepside Tailgate Hinge Bushings-$15.00

Heater Blower Motor & Fan (Non A/C)(Both New) - $25.00

Heater Core (2) (Non A/C) - $10 ea

Non-A/C Heater Lever Control Rebuild Kit (w/ heater switch) New -$15.00

Chrome Valve Cover for 250 CI 6 - $15.00

Grant Steering Wheel & Adapter - $20.00

Exhaust Manifold for 250CI six - $10.00 (it has been blasted and painted, but needs one exhaust stud replaced)

Only pictures I have of the stuff at the moment are below.

Got it Bill, it's sold to you.

:metal:

Anyone have some good GMC T3headlights. High & Low beam? NON FOGGED or turning black in the glass?

if anyone is interested in any of this stuff, PLEASE say so.. the majority of this will not be brung if not spoken for

67-72 wiper arms, $10/set
67-72 steering column upper collars, auto $10, 2 sets
67-72 headlight buckets and trim rings (the peice the headlight goes in, not what is welded to the core support) $10 for 2 buckets and 2 rings, i have 2 sets of these
quadrajet carbs, 2 rebuilders ($30 each), 2 for parts ($10 each), and two electronic ($25 each), or $120 for all 6
73-80 non-tilt auto column with key $35
73-80 dash pad, ok shape $10
73-87 light green sunvisors $20
76 A/C cab, w/all interior and some underhood AC components, $300, with doors (rust free) $425
76 rust free doors by themselves, $150
79-80 hood, side-bow has been repaired before but very straight $50
88-98 green hood $40
88-98 pass door, burgundy, bare, $40
98 305 vortec long block, 141,718 miles, no valve covers, will need crank kit but has roller cam $300
86 305, needs one pushrod, ran good but had slight miss. somewhere around 160,000 miles, $150
long water pump pulley set
-setup for serpentine alt, and vbelt AC. comes with 2 groove +serp crank, 2 groove +serp water pump, and serp. alt pulley $25
oddball stuff:
02 impala underhood wiring harness, 3.8 engine, $50
01 k2500 multifunction (turn, brights, wipe/washers, hazards) switch $20
2.2 ecotec throttle body and coil pack $20

Bump

here's a couple things I'll bring if any interest.
6-lug rims from 69 (5 total)$25/offer
4 new shocks from 69 2wd lwb less than 100 miles use(changed to lowered,shorter shocks) $25/offer
v-8 engine towers $20

I can also transport truck parts from Atlanta, North Georgia, Chattanooga,Knoxville and possibly upper East Tennesse to the meet.

I can also offer on-site lawn mower repair. I know that sounds weird, but I have access to a huge supply of small engine parts.

Do you make house calls? (My ATV bush hog is giving me fits) :whine:

Do you make house calls? (My ATV bush hog is giving me fits) :whine:

Bring it and you can have a mini overhaulin.