I hate this truck, it is officially for sale or part out. I am asking $2000 obo for the whole truck or Its getting parted out. It does run decent, but is NOT road worthy. It has a new wiring harness, new four link rear suspension, nice doors, hood, and grille. The front fenders need inner braces and have been trimmed out for tire clearance on the top inside. The front glass is spoken for by Jon Z. The bed is not for sale unless the whole truck sells. It has a decent air system that is out of the truck with 4 firestone 3500lb bags, four 1/2" valves, an 8 gallon 8 port tank, 2 pressure gauges, switches, and some 1/2" air line. I am asking $400+shipping for the air system complete the way it came out of the truck. The rearend is trashed, but if you want it, $100+shipping takes it. The rear suspension clip will include 8 5/8" hiems on aluminum four link bars along with the rear frame cut just behind the cab. Asking $400+shipping for the clip, I have that invested in all of my custom brackets on back. So have fun and pick this problem child apart. If you need somthing feel free to ask. Pics in drag and destroy rebuild thread, i lost them on my puter, if someone could link that thread for me please, I is kinda puter dumb for stuff like that. All prices are obo, I'm easy and I want it to go away.

here ya godrag and destroy build (http://67-72chevytrucks.com/vboard/showthread.php?t=286624)

pics please, if it is possible
thanks

make an offer joe, I would like to sell all together, but will seperate for you

gimme a day or 2 to think it over... (get permission from the wife) lol
just curious why 8 ports on the tank? oh and brand of valves?

How much for whole front clip ( hood fenders, yada yada.) (Basically from cab forward I need).

I will say this. Either he had one hell of an angel watching over him, or you did so that you didn't drive this thing far. So sorry about your bad luck with the truck. Good luck in with your sale!!
Shawn

How much for whole front clip ( hood fenders, yada yada.) (Basically from cab forward I need).

$500 obo, Fenders are ok but need a rear support. grille and support are very nice, core support is rusty. There are no inner fenders, but there are hood hinges, the hood is very nice but has 1 small deep ding in the nose. I can get you pics if you need them.

8 ports are for front, back, side to side. I have 4 1/2" valves, I belive they are parker valves. I will go $300+shipping for you Joe for the help on the spindle sale.

thanks for the kind words Jorgen

8 ports are for front, back, side to side. I have 4 1/2" valves, I belive they are parker valves. I will go $300+shipping for you Joe for the help on the spindle sale.

cool kd,
thanks.
i'm trying to scrape the cash together:waah:
can you get a shipping quote to 73071, or estimate the dimensions and weight and give me your zip? thanks!

Hey Joe, shipping is $50, this stuff is a bit heavy. Also, I just found there are 3 firestone bags and 1 oddball. It seems to be the same travel, just looks differant.

$500 obo, Fenders are ok but need a rear support. grille and support are very nice, core support is rusty. There are no inner fenders, but there are hood hinges, the hood is very nice but has 1 small deep ding in the nose. I can get you pics if you need them.

If you can grab me pictures of the fenders and the core support where its rusted, i will see what I can do. I can expect it to be high but possible shipping quote to 70706?

The only way I could ship it is truck frieght, unless I break it down and ship every piece serarate, but the hood is to big and heavy for UPS. I will try to get a quote asap, I am a trucker and will be gone all week.

Freight would be perferred. Can get it dropped off at the shop and should be hell of alot less than a home delivery

any carrier you prefer? I can build a crate on a pallet and break down the nose. I will get some pics up for you tonite.

i'm sorry but i am gonna have to hold off on this. Walked into work today and was told my services were no longer needed. so have to find another job before i can go for this.

Oh man that sucks! Best of luck to you finding a new Job. Let me know when you are ready, I may still have the nose.

air system is gone. Doors and windshield are also gone. Keep the requests coming, I need this thing gone.

ttt

how are the fenders? how much shipped to 14532 also check grayhound they are cheap for big stuff ship to geneva, new york

The fenders are ok, They need inner braces and have been cut for tire clearance where they meet the inner fender. I have no idea if there is any bondo in them or if they have had any patches. asking $100 a side + shipping, I will get a quote asap on the shipping. Thanks

how are the fenders? how much shipped to 14532 also check grayhound they are cheap for big stuff ship to geneva, new york

Grey hound is $1 an pound plus a $12 fuel sur charge. Thats about the same as UPS or fed ex.

dash is gone! Need to finish stripping this thing, anyone need anything? Still got the front clip, cab, frame and suspension. The grille is near perfect...

what grill does it have? any pics?

hey thanks for checking on the shipping on the fenders but at that price for the fenders and shipping i might just go with repops

no problem, Joe it has a quad headlight GMC grille, buts its nearly perfect.

cool, thanks

still have the front clip and a few other things, I have to move this stuff asap, no reasonable offers refused.

PM sent

im interested in all the air stuff and the rear clip. please pm or email me at heartbeathotrods@gmail.com thanks, john

I still got this rig, I need to finish stripping it out. Still got a decent nose and grille and hood. Lots of small parts, anyone need anything?

i'm going to crush it, if you need anything please ask now, 2 weeks it will be gone.

You still have the grill?
And what about the center caps and wheel rings they for sale?
let me know and if they are could you post some pictures?
Thanks, and sorry about your project.

Hello 4d, I still got the grille, I will try to get you some pics asap. The wheels and tire went on my burban, they are just stockers with some rings and caps from the local tire store.

Thanks

Do you still have the whole front clip to this truck?

and what kind of bed do you have?

I still have the whole front clip, its not bad but the fenders need inner supports. The core support has a bit of cancer in the usual places. The hood has been trimmed inside for tire clearance and has a deep ding from the inside as big as a quarter. There are no inner fenders and the hinges have been cut fot tire clearance as well. The bed is a shortened long bed with a roll pan. its not to bad either but would need to be finish welded in a few places. It would also need a better front panel, it was trimed out for stacks but is otherwise good. I am asking $500 obo for the front clip with the grille, $350 obo without the grille, and they bed is in they $250-$300 obo range. I am very open for offers as I need to get rid of this thing. Let me know if you have any questions.

could you grab pictures of the front clip and bed? I have a grill already but depending no how urs looks, i might buy it to.

still got the front clip, bed, and rear frame clip. No resaonable offer refused.

still waiting on pictures.

here are some pics of the frame clip. I will try to get some pics of the bed asap

pictures of front sheet metal and bed. I am building a frame for it so not gonna need any Frame parts.