I am going to be installing a factory A/C setup in a customer's '66 Chevy K10 lwb fleetside truck in a few weeks and I am looking for a complete factory A/C set-up, including all underdash, underhood and in-dash components for a complete factory A/C system installation.

Cash or trade for other good, used '60-'66 Chevy/GMC truck parts.

I am going to be installing a factory A/C setup in a customer's '66 Chevy K10 lwb fleetside truck in a few weeks and I am looking for a complete factory A/C set-up, including all underdash, underhood and in-dash components for a complete factory A/C system installation.

Cash or trade for other good, used '60-'66 Chevy/GMC truck parts.

I have a complette set up The only thing that might not be correct is the compressor and brackets, all the rest I know it is right as I removed it myself.
I need super doors for my stepside and fenders. would do some trading. And I have many other parts.
jsinor1956@gmail.com
Jim Sinor
Grapevine, Texas

Thanks for the reply. I don't have any super nice doors or stepside fenders, at this time. Are you interested in selling the complete A/C system outright? If so, what do you need for it? I have a factory-correct A/C compressor, but no mounting brackets. Please let me know your thoughts and I will reply accordingly.

im about to post mine up. its complete with all factory brackets. was working when i took off the compressor to update lines..

im about to post mine up. its complete with all factory brackets. was working when i took off the compressor to update lines..

Is it a complete system? Per the manual and my knowledge, here is a list of the items for a complete system:


Compressor
Engine mounting brackets
A/C compressor muffler
Accumulator & mounting brackets
Expansion valve
Evaporator core
Compressor switch
Thermostatic switch
Blower resistor
Blower relay
Condenser, dryer & tube kit
Underhood box, heater core & fan/blower assembly
Underdash plenum box
Indash plenum box/control cables, pull knobs & bezels
A/C dash diffuser assembly

In essence, I need everything to do a factory A/C system installation on a customer's '66 Chevy K10, minus the actual dash & radiator support.

thats what I have... its in my truck. complete. I am trying to install a unit from an 2008 because i am using the gm serail bus for the dash. so the stock unit is not needed at this time.

As far as trades. I am in the market for good fenders. also would like a 60-63 dash or gmc for my 66. and as always cash is king. The only thing is I would change the drier. they arent the best thing to reuse... although i do have it.

As far as trades. I am in the market for good fenders. also would like a 60-63 dash or gmc for my 66. and as always cash is king. The only thing is I would change the drier. they arent the best thing to reuse... although i do have it.

I sell good, used front fenders for $175.00 each, plus shipping.

Are you looking for a '60-'63 dash cluster or complete dash from "A" pillar to "A" pillar or a complete '60-'63 GMC dash cluster or complete dash for your '66?

I have:

'60-'63 Chevy truck dash clusters (with gauges or warning lights)
'60-'63 Chevy truck dash from "A" pillar to "A" pillar
'60-'63 GMC truck dash clusters (with gauges or warning lights)
'60-'63 GMC truck dash from "A" pillar to "A" pillar
and all the same stuff for the 4-5-6 Chevy and GMC trucks.

Piller to piller. I am goin to custom install an 08 truck dash. I would like to have the glove box and steel dash section. But thats about it. Whats the dash worth... Whats the a/c worth to ya

I missed you when I was in Ft. Worth on Monday morning. Hard 17 hours of driving with no time to make other stops, due to other commitments. A complete dash assembly, minus the cluster, radio, ash tray, heater control bezel is $175.00, including the glove box door, the dash cluster bezel and shipping.