Is there not enough folks into 60-66 and it says there has been topics but i dont see them

------------------
Hugger Orange 70 CST Long Fleet V8,PS,PB,Underdash AC, Lowered W/Rallys

nope not as many people into 60-66s,,,,
the reason you dont see them is you probaly have your options set up so it only shows topics 20 days or newer,,,, below post new topic make it so it says last year or whatever and you can check the old posts,,


------------------
xframeimpala.com (http://www.geocities.com/xframeimpala)


68 4x4 short fleetside deluxe cab 327 air www.xframeimpala.com/68 (http://www.xframeimpala.com/68)
56 big window short stepside
64ImpalaSS 68 large journel 327 turbo 350

Yep, that would be why....that and the usual suspects that are supposed to be in this forum all hang out with the cool boys over in the 67-72 forum http://67-72chevytrucks.com/board/ubbhtml/wink.gif

------------------
62 Stepside Streetruck Project (http://troybaker.com/62stepside/)
96 Nissan daily driver (http://www.troybaker.com/55/daily5.jpg)

Yep, I just tune into the 67-72 board, not enough action here
66 SB Panel, mild 350, 3 on tree
mazda turn, lights, wipers with column shift adapted
blazer inst's into stock bezel
mitshubishi heater console replaces radio-ash tray
hand built wood center console angled to driver
added sway bar from 3/4 ton 72
77-80 wiring, custom fuse panel, tail/turn adaptor, tail kill switch, hi beam pass


------------------
57 3/4 rat
66 C-10 Panel, SWB 350 3spd, restoring
68 C10 LWB 250 4spd
84 Monte Carlo 305 TH350

Actually those 67-72 boys get tired of those everybodys got one camaro type 67-72 trucks
and check out the 60-66 board. There is alot of people into these trucks. they just don't seem to be as centralized as the 67-72 boys and for that i'm envious

I have been following this list for about 6 months now. I agree, there is a lot of action on the 67-72 list.

Also, I think more 60-66 owners are working on their trucks rather than talking about them. (Don't flame me, it was a joke) ;-)

Mine is frame off right now. Just finished painting it and added 3 inch Belltech drop spindles, front and Early Classic 4" drop coils in back.

Starting to work on rusted cab floors and rocker panels.

To do:
Get the gas tank out of the cab.
Add 700R4
Rewire (a wire melt down started the process)

Any suggestions on radiators?

Anybody used the Belltech 3 inch drop spindles? If so, what wheels are you using.

Mick

65 C-10 Fleetside LSB
Big Window, A/C Cab