i'm parting out a few 60-66 chevy and gmc trucks,suburbans,and panels. burb seats, side glass barn doors,cabs,fenders ft and rear,chrome&painted grills,hoods doors. everything you need for a 60-66 trucks,burb,panel.no thanks Rich:burnout:

hey, got a complete metal dash out of a 60-63? pics? price? shipping to 06460?

thanks.

do you have front turn signal assemblies for a 65 gmc

Do you have a choke cable and heater cable assembly.

I need the driver's side prop rod for the rear liftgate for a '64 Suburban, the one that locks the gate up. Let me know if you have one. Thanks.

Looking for v8 tower mounts

hey do you have any decent front fenders and of so price? Pugs

do you have rear barn doors for 64 panel?

I,m looking for a set of seats and an insrutment cluster for a 65 suburban

i need a 65 gmc bed ...how much?

looking for 1960 spindles

Do you have a hood for a 64?

RADIO KNOBS AND SHIPPING TO 76082 THANKS

i am looking for a good front bumper for a 63-66 and a set of front fenders. How much?

Do you have a straight grill assembly, chrome 62 1/2 ton pickup?

Need a power steering ram for a 65 C10.

Larry

Do you still have doors available, and if so, how much are you asking for? What part of Colorado are you in?

Do you have a bench seat available?

did you ever find a front bumper? Im looking for a painted bumper.

looking for rear bumper for 66 ( painted ) and brackets, how much + shipping to 64114

hey guys, not sure on the protocol of this, but i've got some pics on a new post of cabs / trucks i can pull parts from, post will be "FS PICS of 60-66'S", no offense rinco:flag:

im lookin for the top tailgate hinge and licence plate frame email at droped49&aol.com thanks ralf

why don't you post some pictures of your parts

nope did not get the parts list sorry. email to me again please at droped49@aol.com thANKS (65 CHEVY SUBURBAN TOP TAILGATE HINGES)

radiator & shipping to 98032 ? dust cover off tranny if its powerglide ?

do you have any front turn signals for a 63' gmc if so how much.

do you have any gmc grills?

Good stepside tailgate?

no good step side tailgates. sorry

i'm looking for a steering column that has the turn single inside the column no tilt and no column shift i just need a regular ol column give me a price i dont need a steering wheel if that would help with shipping

i believe i'll look locally for it thats anyways

.................thanks*

Looking for the tail/reverse lights from a fleetside. Complete assemblies with housings. Would take the full sections cut from the bed.......Have any>???

Thanks!
:bowtie:

i do have a pair of back up lites with housing. . thanks Rinco :burnout:

Well, backup lights are a start. What is your asking price shipped to 75050??

Thanks!

Well, backup lights are a start. What is your asking price shipped to 75050??

Thanks!$45 +$10 shipped to you

how much do you want for your good 64 chevy doors?
Thanks
drpepper

Do you have one of those, complete with that little driveshaft?

rinco, Have any 66 stepside RR Fender? No rust No dents.

Rinco, Got an unmolested taillight wiring harness? From the firewall all the way to the taillights. also need taillights and one pass. chrome bezel.

Piper

I have "gathered" over a long period of time, some nice painted and chrome (front and rear) bumpers. Mostly for '64-'66 Chev/GMC p/u's.
The problem (logistically) is shipping from Southern Ontario, Canada. Bumpers are obviously heavy and awkward things to send out. Also have some "cherry" inner fenders for same.

Roy........enjoying Canada Day off (same as your July 4th ....kinda) :canada: :flag:

Seeking window frames for the rear quarter side windows of a 66 Suburban. Big surprise, the existing ones are rusted and ruined.

Glass is ok, but also need the latches for the sliding windows.

Anyone got any? Or reference to a supplier?

Thanks in advance.

Looking for an original Rochester 1 bbl Model B for the original 230 in my 63' Have one?

i'll check to see what i have.

I am looking for cab and bed (fleetside long bed) moulding for a 60.

sorry no side trim for 60-61. Rinco

I just purchased a 66 suburban and am looking for just about everything. What all do you have?

yellow wagon, i'm parting a few suburbans 60-66 chevy and gmc.i have seats,side slider glass, side glass locks,tailgates, barn doors,upper gate prop rods etc ,just about anything you will need. email me at rjsisneros@ria.net for more info. thanks Rinco

i need a instrument cluster for my 1966. there are obviously two styles i need the one with the temp, oil, amp, etc at the bottom in squares. i want one with a tach if you happen to have one. thanks. shipping to 30741.

I am looking for a 62 chrome grill in good condition. Also I need some good doors from a 60-63. RUST FREE!

i am lokking for some factory moons or hub caps for a 1960 chevy

sorry, no hub caps left.

Do you have a Chrome Grille for a 60 chevy Pickup in good condition? price and shipping to 97302 please and pics. Thanks Aaron

striaght six generator bracket

Do you have a gas tank from one of the panels?

how much to 08201 needs to have little to almost no rust work minor body work only. dont need guts or glass and if resonable id take a drives side also.
So far Dougs come up empty how about you have you got any more 60 63 s in ?
how do you ship something like this greyhound , yellow fright?
Ed

original steering wheel?

I need a V8 radiator fan shroud. Any chance?

Brian

Do you have a set of 16.5"x 9.75" wheels (Wide wheels!) for a 3/4 ton......the wheels with the 4 tabs rivited to them that hold a hubcap? I have seen them on 1965's and 66's
Let me know!
Thanks
Jim

Need like new front & rear chrome bumpers, chrome grill, side moldings.
All for 1965 chevy swb. Price also.
Southwest Louisiana
e-mail me direct ronnie_norris@thenewtrongroup.com
Thanks,

rinco, Not at all hi-jacking your post. If you have a gas tank to fit jchav62 's needs that's great. If not, I have one posted that came from a 60's 'Burb which should be the same tank, correct? Any input on that? Check my post as "60's Burb tank F/S" with a pic. Is it the same tank for a 'Burb or Panel?Again, not at all hi-jacking your thread, just spittin' out words and lookin' for some info. No experience with the 60-66 era. :)

looking for painted 64-66 grill and shipping to 90045 thanks

How much for a good 64-66 passenger door with shipping to 38116. I might want a drivers door also.

do you have a set of mirrors for a 64? how much?

do you have any solid, non-pitted hood hinges? thanks :metal:

i want a steel grille for a 64' got one? fishmunger123@yahoo.com

looking for a cab for a 64 chevy custom. pm me if you have one, thanks, al

Hi

I need a radiator for a 63 & shipping to 32068?

I need a really nice drivers side door for a '60. Can you help with that?

I need two sliding window frames for a 1965 suburban. Frames need to be in good shape. If you don't have them does anybody out there?

What have you got for 64 gmc stepside rust free doors? pics? price shipped to 97013?

looking for an automatic steering steering column. Let me know

thanks

Rinco,

Please in the furture try listing what parts you have along with your asking price; instead of people having to ask and wait fo a reply. Buying and Selling Code of Conduct (http://67-72chevytrucks.com/vboard/announcement.php3?f=7&announcementid=8)
All I see in this thread is people asking for parts and prices and then most of your replys have been deleted by you. Reading through this thread I nor does anyone else have a clue as to what you do and do not have. This thread is now closed.