67-72Chevytrucks.com

69blazer

Sun, 25 Sep 2022 02:47:44 +0000

by: Alan chichester

Description: Original owner bought new in 1969

Chevy 1967 -1972 12-Bolt Truck Posi w/ 3:42 Gears

Sat, 13 Aug 2022 00:49:04 +0000

by: brianb3001

Description: Low Mileage Chevy Truck 12 Bolt 3 series Eaton Posi w/ 3.42 Ring and Pinion Product Description The Eaton Posi limited-slip differential prevents wheel slip before it can get started. To do that, carbon disc clutch packs, preloaded by a central spring assembly, are located behind each differential side gear. When torque input increases the clamping load on the clutch packs increases. That causes the chatter-free clutch packs to grab and transfer power to the other wheel. Muscle cars, hot rods and mild off-road vehicles should look to Eaton's limited-slip differential for their traction answers. And the fact is, Eaton's Posi units are virtually bullet proof. Application: 1965-1972 GM 8.875" Chevy 12 bolt Truck Rearend (will not fit Car) Compatible gear ratios: 3.73-5.13 (4-series) Axle Spline: 30

1985 K5 Silverado

Fri, 08 Apr 2022 00:32:42 +0000

by: DDog

Description: This is a completely rust free, unmolested original K5 Silverado. There is no frame or body rust, it has some hail damage on the hood. Original presentable paint that could be buffed out. It is a fully loaded vehicle, P/S,P/B,P/W,A/C,clock. tilt wheel, front buckets and console,full size rear seat, 308 posi's front and rear. 350 with 700r4 and 208 transfer case. It does have issues and is not a get in and drive off, although it isn't far from being one. the motor runs good but is ready for a rebuild, the trans was just replaced but the lock up converter is giving a problem" won't release". This Blazer still has ALL the factory smog equipment still hooked up and functional. The only items not factory is the JVC casset radio and the aluminum wheels, the tires are original size . If you are looking for a K5 to restore to original, this is the one for you. It does have some electric window issues. It has 160000 miles. I have a window motor and the factory orig number matching 700r4 trans case that will go with it. Look at the pictures and you will see the glove box build sheet is filled up with equipment it came with that is still in place. No lifts,No hot rod stuff, just a very stock blazer. Call five three zero four four eight four zero 9 8. if interested. I have more pictures of chassis. A clean Nevada title

1996 silverado 4x4 z71

Tue, 26 Jan 2021 18:19:57 +0000

by: 54 jimmy

Description: 1996 Chevy Silverado 4x4 z71. Was built for my brother in law but long story he is not getting the truck. don't ask. see pictures for all the new parts and work done to the truck. truck is a 5.7 4l60e push button 4x4.

2003 suburban LT 2500 4wd 8.1

Thu, 09 Jul 2020 15:40:20 +0000

by: kljfamily

Description: 2003 Suburban 2500 8.1L 4x4 Please read and understand carefully. Selling vehicle as is as a Parts vehicle but must be taken complete. Motor has developed a knock after the radiator cracked near the oil cooling line. All the oil escaped while driving. Turned off car immediately and towed home. Radiator was replaced with a new unit and all fluid replaced but knock remains. Engine idles and starts perfectly with no knock but you can hear knock as RPM rises. knowing the rarity of these 2500 suburban and especially the 8.1's and the aftermarket LS market I am selling the car as is rather then delve any deeper into this myself. Before the radiator cracked it was my daily driver. Just fixed the rear A/C and the front and rear blow ice cold. So if you want a 8.1 complete front to rear or want to attempt the repair this one is for you. It is a beast of a machine and highly sought after by suburban enthusiasts. I know what this car is worth and what the engine even with the knock sells for all by itself as a short block so please don't bother to low ball me offers. No test drives as I do not want to potentially damage the engine but you can come by and hear it idle. if your out of state and want it shipped it can drive and be loaded under its own power. I just wouldn't drive it farther then needed.

65 gmc 1500

Tue, 07 Jul 2020 18:29:59 +0000

by: Gimmie1965

Description: 65 gmc 1500 series. BB 454 with sm465. 89 serpentine setup. Hydraboost and power steering from 76 c30. Motor is a 77. Runs good. Fresh tune up. Has 4 core aluminium radiator. Brand new lmc dual exhaust. Trans is out of 84 blazer. Can take pics of whatever you would to see. The truck pics are about 7 years old. Eng pics are about 3 months ago. Any ?s you can text me at 719 688 4543

1968 K10 Short Stepside Original Black Paint White top

Mon, 18 May 2020 19:40:17 +0000

by: JohnnyRoddin

Description: Great little truck. Eastern Washington/North Idaho truck. Original paint and bodypanels. Driver's door is not original--and is white. Super low optioned truck. Came with radio that is now a Kraco. Manual hubs are removed. 4x4 works. Fawn interior--seat has a woven cover. Rockers and floor good. Back of each cab corner has a rust hole. One cab mount is bad. Bed floor wood is in tact but rough. Heater, wipers, b.inkers and radio work. Uncut dash. Manual steering and brakes. Great tires on rallys. 292 with 3 on the tree. Options in glove box are the black paint, the radio, and the 292. Doesn't even have wires to the side marker lights. Horn on toggle. Glass good and windows work. Muffler rusty. Dash cracked. I drive it a lot. Hop in and go!

1972 Chevrolet Longhorn Custom Camper/20 Series

Sat, 21 Dec 2019 19:02:31 +0000

by: Tim Hein

Description: 1971 Chevrolet Longhorn Custom Camper/20 Series. 51,000 miles, 3/4 ton, all numbers matching, 350 cubic inch V-8 small block with a turbo hydromatic transmission and shift kit, power disc brakes, factory power steering, factory tilt column, factory SoftRay tinted glass, factory air conditioning, which is upgraded to vintage air/heat unit, Edelbrock carburetor, gear reduction starter, HEI ignition, Bluetooth stereo, Dynamat-lined cab and back of cab, Bedliner sprayed under the cab and inner fenders, front and back.

W.T.B. 1964 k-10 swb stepside must be stock OR 1964 PROJECT TRUCK LWB

Wed, 27 Nov 2019 04:13:15 +0000

by: diver

Description: wtb 1964 or 1963 k10 short wheel base stepside stock truck to restore or project truck or burb.4x4 or 64 roller frame thank you truck family

292 thermostat and 1964 k-10 swb stepside must be stock

Wed, 27 Nov 2019 04:12:46 +0000

by: diver

Description: wtb 1964 k10 short wheel base stepside and 292 thermostat housing upper and lower with bypass

292 thermostat and 1964 k-10 swb stepside must be stock

Wed, 27 Nov 2019 04:10:51 +0000

by: diver

Description: wtb 1964 k10 short wheel base stepside and 292 thermostat housing upper and lower with bypass

292 thermostat and 1964 k-10 swb stepside must be stock

Wed, 27 Nov 2019 04:10:21 +0000

by: diver

Description: wtb 1964 k10 short wheel base stepside and 292 thermostat housing upper and lower with bypass

69 c20

Fri, 30 Aug 2019 20:32:05 +0000

by: Gil5469

Description: 1969 c20 long bed truck runs excellent for speed with a granny low new fuel tank sending unit carburetor overhaul runs excellent 350 V8 all Glass looks good interior door panels look good and dash is not cut out can send additional pictures if requested call seven six zero 774-8572

1968 GMC Panel Truck

Mon, 01 Jul 2019 02:24:57 +0000

by: Dually Dude

56 step-side, small window

Fri, 28 Jun 2019 22:57:50 +0000

by: Mr. D

71 LS swaped C10

Fri, 28 Jun 2019 11:30:10 +0000

by: 72farmer

Description: 71 c10, SWB, GM Imperial blue and ice silver, 2004 drive by wire 5.3 engine with 4l60 trans., Alumiumn radiator with electric fans, chrome tilt steering column with Comfort Grip steering wheel, Vintage air, Dakota digital dash, Boyd's fuel tank located under bed, 90's model bench seat, retro fit radio with blue tooth, ceramic coated headers, MagnaFlow exhaust ran and turned out behind rear wheels, . You want find any rust on this one. No trades or waste your time low balling on price

72 C/20 Highlander Camper Special

Wed, 26 Jun 2019 01:17:45 +0000

by: blap

Description: 1972 C/20 Highlander 402 big Block,400 Turbo automatic, A/C PS PB In need of a restoration,Truck runs good .

1956 3100 pickup

Tue, 30 Apr 2019 15:21:53 +0000

by: Wrenchbender Ret

Description: 1956 Chevy pickup. New Goodwrench 350 engine. 5 speed manual trans. w/od. 3:38 highway gears. Ice cold Vintage A/C. The mechanics have been completely refurbished. It is road worthy. Tires are near new with a new spare on the side. It is in the Kansas City area. Call for more info. I will return all calls. 913-522-7634 George

SOLD 1970 Blazer K5 CST SOLD

Mon, 04 Mar 2019 02:00:13 +0000

by: wesmigletz

Description: 70 Chevrolet Blazer Custom Sport Truck - Good condition for it's age, needs paint, it's a 20' Factory buckets and rear seat Runs and drives excellent, fly-in and drive it home Front Disc Brakes, New reproduction Engine and Forward Lamp Wire Harnesses (all new wiring from the firewall forward, upgraded for internally regulated alternator and a full12 Volt ignition) All lights and gauges work I can text a short video of the truck at idle. Fresh Rebuilt 350 V8, with a 262 Comp Cam, Edelbrock Performer RPM Intake Pertronix Distributor Rebuilt Carburetor 2 1/2" HTC Ceramic Coated Rams Horn Exhaust manifolds Brand new 2 1/2" Exhaust with H pipe New PS Pump New Aluminum Water Pump New 4 Core Copper Brass Radiator Fresh rebuilt Stage 2 4x4 700R4 overdrive Transmission New FTI 2200-2400 Stall Torque Converter Custom built rear drive shaft, all new components nothing was re-used NP203 Transfer Case 3.73 Posi Very rare and expensive 15x8" CUCV Military Rims with new tires One of the nicest 69-72 C-10 steering wheels I have ever seen A lot of money was spent on this truck, prior to my knowing that my employer was relocating me. The new drivetrain only has about 20 miles on it. I'm selling because I'm going from a 5 car garage, 6 horse barn property to a place with a 2 car garage. I'll also be selling my 67 Nova SS, 1967 rust-free California factory SWB C10 over the next couple of weeks. I will upload more pics later this week. No offers by phone or text. No trades, $16,500

67 Stepside Frame off restoration

Mon, 04 Feb 2019 23:24:09 +0000

by: ghalperin

67 Stepside Frame off restoration

Mon, 04 Feb 2019 23:23:53 +0000

by: ghalperin

1969 Chevy Stepside

Sat, 19 Jan 2019 15:34:10 +0000

by: Ptjsk

Description: This is a great opportunity for a 1969 short bed stepside truck. This truck has spent it's entire life in California. The rockers are clean and dry, as are the cab corners and steps. No rust on windshield posts, or cowl. Floorboards are also equally dry. No need to spend thousands of dollars on rust repair. The truck still retains it's original V8 (307), and 4 speed drivetrain. Original paperwork and protecto plate with the truck. Beautiful truck to restore, or change the fluids, check the brakes, put on new tires and drive it as is. You may contact me (Pat), at 916 719-9442

1971 C10 LWB Project Truck

Fri, 04 Jan 2019 16:37:43 +0000

by: woodfork1

1988 s10

Sat, 27 Oct 2018 17:19:46 +0000

by: Coreyscars

Description: 88 s10. 350 engine, custom all over, power windows, big speakers, fun to drive.

1976 Silverado c10

Sat, 27 Oct 2018 17:04:51 +0000

by: Coreyscars

Description: 1976 c10. has all the right stuff. 350 engine, 400 trans,cold AC, lowered, big wheels. Runs and drives amazing. Fly in and drive it anywhere.

1978 GMC High Sierra

Mon, 22 Oct 2018 20:42:47 +0000

by: 72BLAZERDUDE

Description: 1978 GMC High Sierra, 307, TB350, AC complete but not working, Orig 400 was replaced with 72 307. Approx 200,000 miles. New 31x10.50 tires. If its rubber then it probably needs to be replaced, Front end is original so driveable but sloppy. 40 yr old stock survivor.

1975 2x2 3/4 ton work truck

Sat, 13 Oct 2018 17:32:54 +0000

by: bonestock72

Description: Smog exempt work truck, motor is missing, 4 gear transmission, drive shaft and exhaust are still there. Set up for SBC. Has coil spring over load helper springs on rear end. Cab is rust free, doors are rust and dent free with the exception of a small dent on the passenger door. Long bed step side w/fender tool boxes. Bed floor is completely covered in diamond plate. Driver s side drip rail is perfect, passenger side has a couple of small dings. No title bill of sale. 1987 was the last time it was tagged. So it s definitely fallen off the DMV computer, you might be able to just sign an affadavit. Picked up in NorCal.

1966 K10 plus 3 Parts Trucks

Thu, 11 Oct 2018 14:33:42 +0000

by: chelt75

Description: 1966 Chevrolet K10 6cyl 4 Speed and parts trucks to complete the build. Decided to go a different route. The truck ran 5 months ago. The front clip has been removed from the truck but is included. 4 Trucks Total Included The K10 and the All Green BBW Truck have Titles

1971 K20 GMC Suburban

Sat, 11 Aug 2018 19:54:08 +0000

by: 1968k20

Description: 1971 K20 GMC Suburban. 1 of about 286 made. 350/np205/700r4. Runs well. It needs ps hoses replaced(I have them), and trans pan leaks as well as transfer case. This is my daily driver. It came with factory tilt,tach,and buckets. I have all of this along with parchment interior. It was black, but wanted to go back to parchment. Also has full-length a/c. It has the usual rust- rockers and floor pans. I will get more pictures later on.

12 bolt positrac with 6 lug axles for trailing arm suspension

Mon, 14 May 2018 19:52:29 +0000

by: '65 chevy lover

Description: Would like to buy a 12 bolt positrac rear end, with 6 lug axles, setup for trailing arm suspension. Thanks, Bill

Working Factory AM/FM Stereo Radio

Mon, 07 May 2018 11:05:16 +0000

by: 70GMCer

Description: I'm looking for a good, working Factory AM/FM Stereo for my 83. I think these cover a lot of years. MUST be in good working order without any noises or broken parts. Face must also be in good shape. Not looking for a NOS unless the price is right. Just a replacement for the one I have now. LMK w/price shipped. I pay with Paypal only

Working Factory AM/FM Stereo Radio

Mon, 07 May 2018 11:04:55 +0000

Working Factory AM/FM Stereo Radio

Mon, 07 May 2018 11:04:38 +0000

Working Factory AM/FM Stereo Radio

Mon, 07 May 2018 11:04:16 +0000

65 Short bed Fleetside

Fri, 04 May 2018 21:44:43 +0000

by: chtr65

Description: 65 1/2 ton short bed fleet side big window custom cab with factory 283 V8, and powerglide transmission. Power steering and factory power brakes. Truck has original wood in bed, in excellent condition. Also, with truck is the original Comfort seat (red vinyl with fabric insert), all 5 original GM rims, and factory side door mirrors. This truck is in excellent condition through out. Always well maintained from new. Many NOS parts have been added in the last 4 years of my ownership. Please call with any questions. 1-717-502-8820 Mike

Custom 1971 body

Fri, 04 May 2018 19:58:42 +0000

by: Angle

Description: Custom cab with shaved rain gutters. custom dash. Suicide doors. Shaved cowl bed is complete unit and shaved. Drenched in bumper. Fiber glass tilt hood. Can provide more pics

1959 GMC 1/2 ton stepside pickup

Wed, 02 May 2018 15:42:26 +0000

by: jaybatta

Description: Selling for my neighbor a Vietnam Marine vet. Truck body is solid, no Bondo anywhere. Interior is gorgeous. Has an inline 6 4 speed transmission two wheel drive. Wood bed. Also has the beauty rings for the wheels. Asking $15,000 or best offer, however no reasonable offers refused. Doesn't use the internet so I guess I'll be acting as a middleman. Not interested in trades of any kind. Hasn't been run in a few. But wouldn't take much to get her up and going. Has a few spots where paint is peeling. And one small ding in the drivers rear fender. I've done my best to document all the blemishes. If you want more pictures let me know, I'll try to get them in a timely manner. Truck is in Livingston Montana. She's a gorgeous truck that won't need much to be a reliable daily driver. Tool box goes with the truck. I think I've covered everything

Gun Rack

Tue, 01 May 2018 03:53:37 +0000

by: Sand Wrench

Description: Hi, I'm looking for a pair of the old rubber coated metal gun racks for a 1972 K10. Thanks!

1987 Chevy 4x4

Mon, 23 Apr 2018 13:13:36 +0000

by: kpkoncepts

Description: This 1987 truck has a 8" ez ride lift, new 350 crate motor, intake, air raid, larger throttle body. 3/4 ton axles Dana 44 front with cross over steering, the rear has a dana 60 w/ rear disc brake kit. Both new drive lines, front and rear. New built transmission installed same time as motor. Phantom grille, 20" wheels w/ 35" Nitto Mud Grappler tires. Billet inserts on the interior, I have just about every receipt saved for reference. This was my daily driver but now I have a work vehicle and rather see this truck go to someone who will enjoy it instead of sitting.

1971 Chevy C20 4Spd 56,000 original mile

Wed, 18 Apr 2018 15:03:49 +0000

by: 71rehab

Description: Very low reserve. Please see the details of the truck on eBay https://www.ebay.com/itm/123085103981?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

1972 Custom Camper K20 Factory A/C Posi SPID

Fri, 13 Apr 2018 14:55:41 +0000

by: HeloCrewChief

Description: (253)229-9377 Feel free to call me with any questions. I'm reluctantly offering my 1972 K20 Custom Camper for sale due to the purchase of a property that needs some work. I was using this truck as a driver until I had time to make it my next project but, my attention will be focused on this property for the next few years. This is a factory A/C, Posi, K20 Custom Camper with a clear title in my name and SPID I know these trucks very well and familiar with the issues they are prone to. Almost all of them have rust issues in the cab corners and rockers. Some have been bondoed up or hopefully repaired correctly. Knowing that, I'm not afraid to purchase one that needs work in these areas as I prefer to have them replaced with new metal correctly. I purchased this truck as it had some things I must have when I purchase one of these for my next project. Rock solid firewall and cowl. Rock solid rain gutters and windshield pinch weld. Well optioned Custom Camper with posi and A/C. Original unmolested truck with the original radio hole intact. An aftermarket radio was installed at some point but, the hole was not cut. Original SPID intact and readable, blue door sticker with VIN, and original VIN plate with correct rivets. I'm also a huge fan of this copper color and the truck retains the original paint on the interior and firewall which I was going to leave intact when I painted the truck back to its original copper/white color combo with parchment interior will be stunning. The original engine and transmission are recently rebuilt. Truck runs smooth as silk. I cannot believe how nice this truck idles one it reaches operating temperature. I will send videos of it running to any interested parties. I've driven the truck extensively around the local area. Goes down the freeway at 60-65. I'm guessing 4.11 gears. All marker lights, tail lights, headlights, and signals work. The original A/C compressor, brackets, condenser, steering column(currently has a mid 80's tilt column installed) are included. Original rubber floor covering in good condition. The upside of this truck is the engine and transmission have been rebuilt and it is a fairly original truck. The down fall is it will need some superficial sheet metal replacement due to a cheap paint and body job done 15 years ago. The truck will need patches or replacement metal on the fenders, doors, rockers, cab corners, and bed. My plan was to buy a rust free donor 2wd long bed from Eastern Washington or Oregon and use the bed, fenders, doors. Like I said, the important impossible to repair cowl and roof are in rock solid shape. The cab supports are all rock solid and do not require replacement which is rare since they hold dirt/mud. The cab bushings are also in great shape and do not require replacement! I have a clear title in my name. Rear canopy locks and I have the key for it. You can drive the truck home at your own risk. Probably safer and cost effective to just have it shipped home. I'm guessing shipping will run $400-$1000 depending on where it is goino.

89 454 SS

Tue, 10 Apr 2018 23:54:27 +0000

by: Coreyscars

Description: 1989 c1500 that I put a 1996 454 and transmission. All stock with complete wiring and exhaust. Needs a few things to be perfect but a fun truck. Looks factory, I used the core support out of the c3500 so I could use the big radiator.

My '47 Chevy

Mon, 09 Apr 2018 21:47:59 +0000

by: bob_o

Description: Like the title says, trying to track down my old truck. I don't have the VIN and no way of getting it, I only have the License Plate number which at the time of sale 10 years ago was CA Blue Plate 1K01721. I believe it was sold to a guy in Central or possibly Northern California. Truck was a '47 Short Bed, 5 Window Deluxe Cab. Easiest way to identify it would be by the 4 '41-'48 Chevy Car tail lights in the narrowed rear bumper, the two Frenched antennas in the passenger side front fender, or the gas filler in the '47-only position on the passenger bed side (not in the cab like the '48-'54s). At the time of sale it was white primer with a purple top, seat was pleated pearl white vinyl with purple piping, had an ugly powder coated grill, handles and hood emblems were shaved. It was running a 250 c.i. Inline 6 with Clifford Headers & 4bbl Intake, being shifted by a 3 Speed Auto with Lokar Shifter. I'm not on the forums much these days, so please hit me up via email thirdeyeopener@gmail.com or Instagram @_thirdeyeopener_ with any info or possible leads. I know this is a Hail Mary, but I need to try. Thanks in advance. Bob [img]https://i.imgur.com/xCjy5ozl.jpg[/img] [img]https://i.imgur.com/c3l5m2Ul.jpg[/img]

west coast mirrors

Mon, 09 Apr 2018 00:25:32 +0000

by: duallydude63

Description: stainless square body style west coast mirrors

67-72 GMC Suburban

Fri, 06 Apr 2018 01:52:13 +0000

by: tch64

Description: I am looking for a 67-72 GMC suburban. I am not looking for a project so much but to find a project that has been started and requires completion so I may complete it the way I wish. I would prefer 4wd but would consider a 2wd for right vehicle. I am also open to door configuration, but it must be an automatic. I honestly don't care if it has an engine or interior or if everything is original or not as the body is my main concern and I anticipate that much of it will not be stock when I am through - but need a good platform and don't want a rust bucket or a pile of parts as my skills are fairly limited :) Plans are to find something workable and build a daily driver with updated hardware and an original body. I have been looking without much real luck for quite some time so thought maybe someone here may know of an unfinished project or possibly direct me to a suitable vehicle, and for that, I will thank you in advance for your time and consideration.

1969 C10 CST short bed

Thu, 05 Apr 2018 13:10:51 +0000

by: SoCoC10

1972 C10 SWB Base beauty

Thu, 29 Mar 2018 17:17:33 +0000

by: skytop

Description: See description among the photos. Additional photos available.

1970 Chevy C40

Wed, 28 Mar 2018 13:14:13 +0000

by: khess

Description: 1970 Chevy C40 350 V8 5 Speed Very little / No Rust Does Not Run Decent Tires on the Rear Hand Brake Works No Seat Wiring is there for the motor Last Ran in 2015 Clean title

1971 Chevy C 20 Survivor Idaho Farm Truck

Sat, 24 Mar 2018 16:26:31 +0000

by: RIDDLER2018

Description: Here is a great all Idaho original Chevy Cheyenne C-20 Patina farm truck with original Cheyenne trim. Please note this is a coil spring truck C-20. This truck was used regularly on a dry Southern Idaho farm until the original owner passed away around 1986. It sat for over 25 years in a barn before being sold to the next owner who had big plans to restore it. The second owner never got around to the restoration. I bought it from his widow and got the truck into it's current condition. Obviously the mileage cannot be verified but the paper trail and it's physical condition supports 121,267 original miles. The truck has 95% of the original paint with solid original rockers. Please look at the photos carefully as this is a true patina survivor truck. The roads are not salted in Idaho which is a contributing factor to why this truck is in the original condition that it is in. This truck starts up and drives down the road excellent; she has a Factory original numbers matching rebuilt 350 engine and rebuilt factory transmission. The truck was manufactured in the Fremont, CA Chevrolet plant. Some items to dress up the engine compartment were added. The engine doesn't leak or burn oil. Fresh oil change performed within 30 days. Compression test Static test on engine shows Cylinder 1 :130 PSI, Cylinder 2 : 125 PSI, Cylinder 3 : 130 PSI, cylinder 4 : 130 PSI, Cylinder 5 : 125 PSI, cylinder 6 : 130 PSI, cylinder 7 : 135 PSI, Cylinder 8 : 130 PSI. New parts purchased within the last 400 miles: new heater core, new thermostat, all new hoses, new fuel pump, new factory style windshield and gasket, new carpet kit, two new sill plates, seat cover, 4 new tires / wheels, 4 shocks/coils on all four corners, wrapped headers. Things it could use depending on the buyers preference: the fuel gauge stopped working consistently within the last 200 miles, cargo lamp doesn't work, original seat cover has tears on drivers side which is why I added a seat cover in case the next owner wanted to recover the factory seat to match the factory door panels. Truck has factory disc brakes that were redone recently. It stops smooth without pulling. The truck has plenty of power and a smooth exhaust sound. I am only selling this truck because I have way too many trucks to drive them regularly and my barn is too full. Please serious bidders and serious buyers only. Please ask any and all questions. I can assist with shipping the truck at the buyers expense. Local viewing can be arranged by setting an appointment. My phone number is (509)209-7262 between the hours of 8am and 9pm PST. I would respectfully request that only serious cash buyers call me. I have to sell four trucks to make room in the barn for my newest addiction of autocross racing. Or I can build another barn and I would be living in it.

1971 Chevy C 20 Survivor Idaho Farm Truck

Sat, 24 Mar 2018 16:25:15 +0000

by: RIDDLER2018

Description: Here is a great all Idaho original Chevy Cheyenne C-20 Patina farm truck with original Cheyenne trim. Please note this is a coil spring truck C-20. This truck was used regularly on a dry Southern Idaho farm until the original owner passed away around 1986. It sat for over 25 years in a barn before being sold to the next owner who had big plans to restore it. The second owner never got around to the restoration. I bought it from his widow and got the truck into it's current condition. Obviously the mileage cannot be verified but the paper trail and it's physical condition supports 121,267 original miles. The truck has 95% of the original paint with solid original rockers. Please look at the photos carefully as this is a true patina survivor truck. The roads are not salted in Idaho which is a contributing factor to why this truck is in the original condition that it is in. This truck starts up and drives down the road excellent; she has a Factory original numbers matching rebuilt 350 engine and rebuilt factory transmission. The truck was manufactured in the Fremont, CA Chevrolet plant. Some items to dress up the engine compartment were added. The engine doesn't leak or burn oil. Fresh oil change performed within 30 days. Compression test Static test on engine shows Cylinder 1 :130 PSI, Cylinder 2 : 125 PSI, Cylinder 3 : 130 PSI, cylinder 4 : 130 PSI, Cylinder 5 : 125 PSI, cylinder 6 : 130 PSI, cylinder 7 : 135 PSI, Cylinder 8 : 130 PSI. New parts purchased within the last 400 miles: new heater core, new thermostat, all new hoses, new fuel pump, new factory style windshield and gasket, new carpet kit, two new sill plates, seat cover, 4 new tires / wheels, 4 shocks/coils on all four corners, wrapped headers. Things it could use depending on the buyers preference: the fuel gauge stopped working consistently within the last 200 miles, cargo lamp doesn't work, original seat cover has tears on drivers side which is why I added a seat cover in case the next owner wanted to recover the factory seat to match the factory door panels. Truck has factory disc brakes that were redone recently. It stops smooth without pulling. The truck has plenty of power and a smooth exhaust sound. Please note my feedback rating of 100% on Ebay as OldtoyotaFJ40. I have been on Ebay for a very long time with a perfect score. I am only selling this truck because I have way too many trucks to drive them regularly and my barn is too full. Please serious bidders and serious buyers only. Please ask any and all questions. I can assist with shipping the truck at the buyers expense. Local viewing can be arranged by setting an appointment. My phone number is (509)209-7262 between the hours of 8am and 9pm PST. I would respectfully request that only serious cash buyers call me. I have to sell four trucks to make room in the barn for my newest addiction of autocross racing. Or I can build another barn and I would be living in it.