The 1947 - Present Chevrolet & GMC Truck Message Board Network
|
|
|
|
|
Seller Details
|
Registered User Posts: 121 Registered: October 2008 Location: Perry OK
|
Feedback: None
|
|
1972 GMC K2500 SIERRA Grande
|
|
Quantity
|
Views
|
Date Posted
|
1
|
2695
|
Sat March 19, 2016
|
|
Asking Price
|
Shipping Amount
|
Condition
|
Distance from you
|
$7,750.00
|
None
|
Excellent
|
|
|
Description:
|
Ok we'll never thought I would get rid of this thing but here goes. As you can tell it's a project but a very nice one.
Frame was completely stripped and sand blasted primed and painted with Masterseries coatings. A4 inch rough country lift kit is installed with new springs front and rear. Wheels are original 16.5 with roller tires. I have 4 new Moog ball joints for the knuckles. Dana 60 rear and Dana 44 front. Rear axle has new drums and wheel cylinders seals and brake lines. Front axle is in good shape.
Body
The cab has most of the rust repaired. Both rockers and cab corners replaced and 3 of the floor supports. Only needs some finish welding on the cab corners and a small hole in the floor pan repaired. The body was professionally blasted and primed with epoxy primer the same day.
The front clip has already been painted in the original medium copper poly. It is Omni base coat with PPG 2021 clear. I have almost two gallons of paint left and that will go with the truck. Bed has absolutely zero rust. It was taken apart and blasted with two coats of epoxy as well the bed floor is wood. It has NOS rear fender wells
Engine
Brand new not rebuilt L 19 454 gen VI BBC. Has Camaro headers and a performer intake. Other than that its stock. I used a points distributor and converted it with a Crane Cams electronic conversion with a melonized gear for the roller cam. Has a DIY 4x crossmember kit to fit the BBC. Brand new 4 core radiator. New rubber body mounts. Turbo 350 that is zero miles on a rebuild and a fresh np205.
I know that it's gonna take a certain person to want to take this unfinished project I feel there is a ton of value in it. Most of the heavy lifting is done. I have everything for this truck. Obviously it's not all pictured but I can get all that to an interested person. I'm military and I have been deploying once a year and I see several more in the future. It's not ever gonna get done by me. Call if interested. Matt 918-399-9866
|
Keywords:
|
K2500 1972 4x4 Sierra Grande BBC 454
|
|
|
|
|
|
Author
|
|
morgan71
Registered User
Registered: October 2008 Location: Perry OK Posts: 121
|
Comment Date: Thu March 24, 2016
|
|
Offers?
|
|
|
|
Cedricreilly
Junior Member
Registered: May 2014 Location: Nebraska Posts: 61
|
Comment Date: Sat March 26, 2016
|
|
Would you part out? If so what would you need for the frame?
|
|
|
|
Cedricreilly
Junior Member
Registered: May 2014 Location: Nebraska Posts: 61
|
Comment Date: Sat March 26, 2016
|
|
Or rolling chassis as it sits....
|
|
|
|
morgan71
Registered User
Registered: October 2008 Location: Perry OK Posts: 121
|
Comment Date: Sat March 26, 2016
|
|
I'd rather not part this thing out. The frame/ motor/transmission are where most of my money is tied up in. The motor is brand new crate engine.
|
|
|
|
morgan71
Registered User
Registered: October 2008 Location: Perry OK Posts: 121
|
Comment Date: Sat March 26, 2016
|
|
Shoot me a strong offer, this truck needs to go back to Nebraska
|
|
|
|
Cedricreilly
Junior Member
Registered: May 2014 Location: Nebraska Posts: 61
|
Comment Date: Sat April 2, 2016
|
|
Sorry.... I'd be pretty far from what you are asking on her....
|
|
|
|
morgan71
Registered User
Registered: October 2008 Location: Perry OK Posts: 121
|
Comment Date: Sat April 2, 2016
|
|
Yeah I get it. But if you do the math on it I'm not far off. Find a truck have all the rust fixed then put in primer. Buy a brand new 454. Not rebuilt. Then buy a lift kit, have the trans rebuilt. It will add up fast. I have some negotiating room in this but I can't let it go for nothing.
|
|
|
|
DeRock
Registered User
Registered: February 2016 Location: Candle lake Saskatchewan Posts: 6
|
Comment Date: Tue January 10, 2017
|
|
Is this still for sale and wondering if it had air
|
|
|
|
|
All times are GMT -4. The time now is 03:18 PM.