|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Ok I am about to attemp door repair. I had the doors sand blasted and found a little rust.
|
Re: Newbie with a 65 Chevy
No problem for ya Brother!!! :mm:
|
Re: Newbie with a 65 Chevy
Looking cleeeeeeeeeen DW! :metal:
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Getting bedside ready!!
|
Re: Newbie with a 65 Chevy
Progress! :metal:
|
Re: Newbie with a 65 Chevy
X2 on progress! :metal:
|
Re: Newbie with a 65 Chevy
Worked in the shop this morning and welded up some patches on the doors. Spread a little body filler also. Had to to turn the heat on it was 35 degrees and raining. I already miss the summer heat. :lol::lol:
|
Re: Newbie with a 65 Chevy
Not sure if I miss the Summer heat, but the 70's is better than the 30's when you're working outside...:lol:
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Still a little cold in the shop but I did manage to spread a little filler.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
And the cab.
|
Re: Newbie with a 65 Chevy
Progress!!! :metal:
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Slow but still progress. :metal::metal:
And smoothed out. |
Re: Newbie with a 65 Chevy
1 Attachment(s)
And the driver door.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Christmas came early!:metal::metal:
|
Re: Newbie with a 65 Chevy
2 Attachment(s)
About to spray some primer. Hopefully tomorrow if I can get the shop warm enough.
|
Re: Newbie with a 65 Chevy
Primer!!! :metal:
Nice Christmas Gift too...:mm: |
Re: Newbie with a 65 Chevy
1 Attachment(s)
We got primer!!!!!
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Bedsides are ready for final blocking!!!
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
Other side.
|
Re: Newbie with a 65 Chevy
Sorry for the sideways pics. My phone does that from time to time. Don will have to help me out again. :lol::lol:
|
Re: Newbie with a 65 Chevy
Lookin' Good Brotha!!!:metal:
|
Re: Newbie with a 65 Chevy
Good job on the bodywork!
|
Re: Newbie with a 65 Chevy
Looks real straight. What kind of primer did you use?
|
Re: Newbie with a 65 Chevy
Thanks Guys! It turned out real nice. I am not a paint and body guy it takes me a while to get things straight. I just do this as a hobbie. But there is alot of knowledge on this forum and great people that will give good advice. Bomp I used deltron DPS 3055. I am going to spray DBC base and 2000 clear. And I did use PPG EPX 950 for the epoxy first coat to seal the sandblasted metal.
|
Re: Newbie with a 65 Chevy
1 Attachment(s)
I have the cab straight and primed with 2K. :metal::metal:
|
| All times are GMT -4. The time now is 02:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com