![]() |
Re: 1971 K20- project just get driveable!!
5 Attachment(s)
I had a few days off over the holidays and had some time to work on this again. Since its winter I have time to be on the forum again:chevy: I finally made a subframe for the Diamond 9ft plow and got it mounted. It was a lot of fabrication since I just had two small bracket pieces to start with. There is a lot of steel here, probably about 150lbs in total. Total plow weight is about 1000lbs!
Here is the subframe I built and the intermediate Diamond frame I sandblasted and improved. Last pic is just the subframe on the truck, so how it will look in the summer if I pop off the intermediate frame. |
Re: 1971 K20- project just get driveable!!
Looks great, the fab work looks awesome
|
Re: 1971 K20- project just get driveable!!
3 Attachment(s)
Thanks Dale! Here are some pics of it mounted and at work. I will make a new plow skin for it this summer, it has pretty serious rust on the blade still. These skyjacker 2.5 lift springs barely care this heavy plow is on the truck. Sure moves a lot of snow quickly. I do need to rebuild the front driveshaft, the cardan joint is clacking pretty loudly under load.
|
Re: 1971 K20- project just get driveable!!
Yea nice fab work!
|
Re: 1971 K20- project just get driveable!!
Quote:
|
Re: 1971 K20- project just get driveable!!
Quote:
|
Re: 1971 K20- project just get driveable!!
Very nice work on the plow mount! How quick can you knock one out for a western or meyers? :lol:
|
Re: 1971 K20- project just get driveable!!
nice build on the truck, love the K20's
|
Re: 1971 K20- project just get driveable!!
Quote:
Quote:
Quote:
Quote:
|
Re: 1971 K20- project just get driveable!!
Updates?
|
Re: 1971 K20- project just get driveable!!
3 Attachment(s)
Long overdue for an update. A lot of life has happened in the last year or so. More on that later.
Finally found a little time to work on the truck again. Yanked the engine out as it was only running on 7 cylinders and I never could get the one valve to seat and give good compression. As such, I have only been using it around the property and to plow snow. I did put another ochre bed on some time ago for a better paint match. Finally assembling and putting in a new crate engine that I ordered about 3 years ago. Here are some pics. Takes a little while to degrease the used manifold, spark plug shields, wire clips, paint the water pump, paint manifold, build a oil pump priming tool, round up the misc gaskets and rubber pieces. Anyways good to be back at this spare truck. |
Re: 1971 K20- project just get driveable!!
Good to see you're back on it.
|
Re: 1971 K20- project just get driveable!!
2 Attachment(s)
Thanks Dale, glad to be back!
I was really struggling with not painting the engine orange but I figured this may be about my only truck that won't be fully stock looking so I might as well have a little fun with it. Got the new flywheel and clutch installed. This weird young cat now calls my place home. My friend found him starving and pretty wild on some property I own. We saved him and feed him well and now he is super grateful and just loves life. I'm trying to teach him not to be comfortable around vehicles but he just isn't getting it. If he survives to an old age I will be surprised. |
Re: 1971 K20- project just get driveable!!
2 Attachment(s)
Old engine out
|
Re: 1971 K20- project just get driveable!!
Quote:
The new bed looks good. Much better match for color. Good luck with the break in. The last one I did went very bad. I get to build another engine! At least we're not getting much snow to plow so far. |
Re: 1971 K20- project just get driveable!!
I think it looks good black. Great looking cat to keep you company too.
|
Re: 1971 K20- project just get driveable!!
Quote:
Quote:
He is a bit odd, check out this pic. |
Re: 1971 K20- project just get driveable!!
What pic? LOL
|
Re: 1971 K20- project just get driveable!!
Hi Jud - great to see an update. Passed through Minneapolis last week and thought of you. Whats the cats name? Pete
|
Re: 1971 K20- project just get driveable!!
2 Attachment(s)
Quote:
Quote:
|
Re: 1971 K20- project just get driveable!!
He looks much healthier and happier now.
|
Re: 1971 K20- project just get driveable!!
Good to see your back at it. Was thinking about asking how the projects are coming along and your thread popped up again. How is the Cummins swap coming in the red square body? Still have the Longhorn in the herd? I found another one out in South Dakota and I got a thread on it in the 4x4 section called Big Bird.
|
Re: 1971 K20- project just get driveable!!
2 Attachment(s)
Hi Nathan, I will check it out, always like to see other builds! Thanks for stopping in here. I haven’t done much on the Cummins truck but it’s moving up the list and the engine is ready. Still have the longhorn. We parked it down by the road and sold apples out of it. Here is a pic of it while being pulled down there. We really like the color of it. I almost forgot how beautiful MN is in October.
|
Re: 1971 K20- project just get driveable!!
1 Attachment(s)
New engine sitting in place.
|
Re: 1971 K20- project just get driveable!!
Looking good.
|
All times are GMT -4. The time now is 01:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com