Re: The 60-66 "PAYING IT FORWARD" thread!
 

Hey Dude, sent you a PM.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Time to get rid of some items taking space.

All of these are for a 1964 C10:

* Two new front brake drums - Napa 440-1071
* New Brake shoes - Napa TS-280
* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar

Re: The 60-66 "PAYING IT FORWARD" thread!
 

PM sent on brake drums.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

@1966burb: Could not figure out how to attach an image in a message reply, so they are here:
Attachment 2138880Attachment 2138881

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Thanks for the pics. Sent another PM. J

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Sent PM for brake shoes & drums

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Time to get rid of some items taking space.

These either came of a 1964 C10, or were used on one:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Used manual steering box. Worked when removed.
* Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Thanks for paying it forward! I'm interested in the steering box if you're okay with shipping and if shipping isn't crazy (crazy being more than $30), would ship to 19053 in PA. If all items are pick up only, not a problem.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Sorry, I'd rather not have to ship anything. Hopefully, there is a manual steering box a little closer to you.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I posted this in the classifieds, however, it should have bedd Ed n here.

In South Orange County.


I converted to discs, so I have these drums, they are like new. Very few miles.
4-5/8” tall

Pick up in South Orange County CA.
I could meet someplace nearby.




https://67-72chevytrucks.com/vboard/...d.php?t=828233

Re: The 60-66 "PAYING IT FORWARD" thread!
 

283 block, heads, crank, rods and pistons, along with a bare th350 case. Block is standard bore and has been chemically cleaned. Used for chassis setup, no longer needed. No shipping. Come and get it. Valve covers not included.

We’re Are You located Thanks
Posted via Mobile Device

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'm in Sonoma around 50 miles north of San Francisco.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Used manual steering box. Worked when removed. - Gone
* Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are.
* Like-new 1960 Shop truck manual - Gone

Local pickups, only.

“Gone” means picked-up and saved from a landfill.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Id like the shop manual, and the steering box if still available.

I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM.

Thanks,
Keith

PM sent.
Posted via Mobile Device

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.

The 66 had gauges and hazard light switch. The 62 had idiot lights.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak

Local pickup only.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I need the 66 wiring harness. Mine is all taped up and ready to start a fire.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

66 harness spoken for. 62 harness still available

Re: The 60-66 "PAYING IT FORWARD" thread!
 

New repro 64-66 2wd gas pedal.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I posted these awhile back and had no takers. Here goes again.

Four hub caps from a 62 C20 with 17.5 tubeless wheels.

Five 17.5 tubeless wheels with good clips for the caps.

I can ship the hubcaps.

The wheels need to be picked up. For the wheels - If no arrangements are made or they are not picked up by the end January, they're off to the recycler. I'm cleaning house.

Located in Los Gatos, Ca.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'll pay for the shipping on the hubcaps. To 31061 please

Re: The 60-66 "PAYING IT FORWARD" thread!
 

They're yours. PM me your shipping info.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'd love to get them. Such a shame to send them to the scrapper when I'm after those very wheels. The problem would be getting them down here in an affordable manner. Any ideas?

Re: The 60-66 "PAYING IT FORWARD" thread!
 

If you really want them, I foresee a road trip in your near future

Re: The 60-66 "PAYING IT FORWARD" thread!
 

PM sent with shipping info. Thank you!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

All from a 1964 C10:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Radiator. Has leak
* Left and right doors.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

72cs20, I'll take the 62 wire harness if it's still available.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

It's yours. PM me your shipping details.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Great! Glad to help.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Doors look a lot better than the ones I have. I'll be in the Bay Area the weekend of Feb 12-13. If they are as good as the pictures look I would love to pick them up
Tom

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Would love the "Approximately 2 year old used master cylinder - Single reservoir original type" if it doesn't have any rust on the inside. I can pay for shipping. Thanks, let me know.

Andy

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I am assuming you are in the Mountain View near San Francisco. If so, please PM me, as I want them
Thanks
Tom

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Yes, I am in MV near SF. I'll send a PM.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

PM sent.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Uploaded pics for reference.

Interested if you still have it
Posted via Mobile Device