The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 16 of 16

« First

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)

- - 72 GMC Short Step Build (https://67-72chevytrucks.com/vboard/showthread.php?t=603726)

Advanced Design

02-18-2018 09:36 AM

Re: 72 GMC Short Step Build

That looks good. And a very good friend to share his building. Nice looking herd you have there!

beaterku

08-18-2018 10:39 AM

Re: 72 GMC Short Step Build

Quote:

Originally Posted by Z10 (Post 7286306)

Time for the Wilwoods!

Car Boss finished up the rear end, so it was time to install the Wilwoods that had been sitting in my garage for a year. I sourced these from Travis at Pro Performance in Arizona and all went well. The only exception were the front braided lines that where about 10" to long. So, unless you're lifting your truck you might request shorter lines. We also added a Wilwood master and proportioning valve, and Car Boss bent up some very nice stainless hard lines. You'll also notice if you look carefully, he welded on a couple of brackets on top of the axle tube to securely hold the lines in the rear.

:gmc2:

Do you happen to have any picture of how you integrated the Wilwood e-brake lines to the stock e-brake cable? I am going to tackle this soon. I have a few ideas, but was curious what you did.

Z10	11-23-2018 07:10 PM

Re: 72 GMC Short Step Build

Beater, so sorry I'm just now seeing this post. I've been busy on other projects and haven't spent as much time on the forum as I would like.

Let me see if I have some pics and I'll post them here.

:gmc2:

Z10	08-08-2020 04:13 PM

Re: 72 GMC Short Step Build

1 Attachment(s)

Wow! It's been almost 2 years since I updated this post. I've been busy on a couple of other projects. A 79 Trans Am and most recently a 68 Resto Mod Firebird 400.

The GMC is doing well and now has over 14k miles on the build and is holding up very well. Here's a recent pic.

OutlawDrifter

08-08-2020 09:35 PM

Re: 72 GMC Short Step Build

Looking good!

knomadd

08-14-2020 09:38 AM

Re: 72 GMC Short Step Build

Quote:

Originally Posted by Z10 (Post 8788872)

I've been busy on a couple of other projects. A 79 Trans Am and most recently a 68 Resto Mod Firebird 400.

Pics, or it didn't happen! :lol:

Z10	08-14-2020 11:32 AM

Re: 72 GMC Short Step Build

5 Attachment(s)

Ok, here are a few pics of the 68 Bird. It's a Resto Mod and lots has been done to it. Tremec 5 speed, Vintage Air, Relic power windows, Dakota Digital gauges, custom interior, Fast EFi, tubular control arms, Detroit Speed sway bars, shaved drip rails, tucked front and rear bumpers, C5 door handles, new tinted glass all around, disc brakes, remote entry and push button start, Foose wheels, self dimming rearview mirror with compass, JVC steareo with back up camera.

Nope, I didn't build it but I will make changes. Front air dam, rear 69 TA spoiler, drop spindles, lowering blocks, change out the LOUD Flowmaster FX mufflers for Magnaflow and a good cut and polish and loose the ricer headlights.

Average Joe

08-17-2020 04:27 AM

Re: 72 GMC Short Step Build

Quote:

Originally Posted by Z10 (Post 8788872)

Looks like she is holding up great! Props to you for driving it that much.

Z10	01-29-2021 07:49 PM

Re: 72 GMC Short Step Build

2 Attachment(s)

I had a request for close up picks of my tailgate pins. Hope this helps.

Z10	01-29-2021 07:52 PM

Re: 72 GMC Short Step Build

2 more photos.

All times are GMT -4. The time now is 12:02 AM.

Page 16 of 16

« First

Show 40 post(s) from this thread on one page