Re: Dumptruck Dolly
4 Attachment(s)
Worked on the motor some more. The headers came from my C10 but hung too low, so I get to put the Doug Thorley’s on Dolly...hope they clear everything. I am waiting on a water pump and a thermostat housing that clears the oil filler.
|
Re: Dumptruck Dolly
Nice!!!
|
Re: Dumptruck Dolly
The motor is pretty!
|
Re: Dumptruck Dolly
Thanks guys...
|
Re: Dumptruck Dolly
Nice work, and continued progress.
|
Re: Dumptruck Dolly
Quote:
|
Re: Dumptruck Dolly
Great Progress.
I just noticed / You really like those Extended T wing & Y wing hold downs. I will share a trick I learned. Once you get the Engine (Broke in) / (Warm-Up) and (adjusted). It is a good idea to put a Touch of silicone on the inside of those T-Wings. So the next time you raise the hood they will be there. . |
Re: Dumptruck Dolly
Quote:
I’m using them here because I pulled them off a different project which will no longer be needing them...I didn’t want them to go to waste. |
Re: Dumptruck Dolly
Quote:
I really like those for the looks. Years ago ,/ I had a set of those. I raised the hood and (WHere did they go) . Luck had it. / It was laying on the upper A-Arm. . |
Re: Dumptruck Dolly
1 Attachment(s)
Water pump, intake, thermostat housing finally put on...robbed another small block for the carb. Slowly coming along...
|
Re: Dumptruck Dolly
That's fine looking engine
|
Re: Dumptruck Dolly
Quote:
Next step is fuel line from pump to carb, flywheel and clutch assembly...getting closer. |
Re: Dumptruck Dolly
Ordered new flywheel, clutch, pressure plate, (with throw out bearing) from my local parts retailer, but they included the wrong throw out bearing...have to wait a bit.
|
Re: Dumptruck Dolly
1 Attachment(s)
Another step closer...
|
Re: Dumptruck Dolly
Oh man that's a beautiful thing. God bless Chevy orange!:chevy:
|
Re: Dumptruck Dolly
Quote:
|
Re: Dumptruck Dolly
Looks great...
|
Re: Dumptruck Dolly
Quote:
|
Re: Dumptruck Dolly
5 Attachment(s)
We have lift off today...I’ll be able to clean the frame and paint it, and then drop the drivetrain in all at once.
|
Re: Dumptruck Dolly
2 Attachment(s)
I found a pair of old skool cool pipes that I think I’ll add to the exhaust.
Also ordered and received some Warn lockouts. |
Re: Dumptruck Dolly
1 Attachment(s)
Got back to the frame...found a common spot on both the 3/4 and 1 ton frames. Measurement was made from the 3/4 ton and transferred to Dolly’s frame. The 2 1/8 “ location is the front bolt hole for the V8 crossmember.
|
Re: Dumptruck Dolly
1 Attachment(s)
Hey, check out the bottom hole that lined up after drilling the top holes...made me feel feel like I did something right.
|
Re: Dumptruck Dolly
2 Attachment(s)
After a little paint and some grade 8 hardware...
|
Re: Dumptruck Dolly
1 Attachment(s)
I got rid of the 2wd driveshaft and the 6 cylinder exhaust and cleaned/painted under the cab. Next time I’ll get rid of the transmission crossmember that’s used with the 292.
|
Re: Dumptruck Dolly
Looking good, starting to come together.
|
All times are GMT -4. The time now is 06:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com