The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   NAPCO Thread (https://67-72chevytrucks.com/vboard/showthread.php?t=320260)

MJN 05-11-2019 10:33 AM

Re: NAPCO Thread
 
Quote:

Originally Posted by 58pan (Post 8522165)

Looks like its a GMC cab with a '57 Chevy front clip on it. The speedo and tach are not original obviously. Looks pretty decent overall

57NAPCO 05-17-2019 01:05 AM

Re: NAPCO Thread
 
1957 GMC Pick Up Napco 4x4<<MOTIVATED SELLER - $9800 (Loomis)

https://sacramento.craigslist.org/ct...873242950.html


1957 Napco Tractor - $5500 (Princeton)

https://bemidji.craigslist.org/grd/d...852320262.html


1956 GMC Napco 4x4 (Nassau)

https://newyork.craigslist.org/lgi/c...878080393.html

HO455 12-08-2019 05:17 PM

Re: NAPCO Thread
 
2 Attachment(s)
59 Apache that was ran hard and put away wet. That's my opinion unlike the truck which is not mine. Not much information given but a lot of money wanted. At $12500 it will be around awhile. And how come there are no pictures of the passenger side?

https://seattle.craigslist.org/oly/c...034413381.html

1959 Chevy SWB fleetside NAPCO conversion, in-line 6, PTO with Ramsey winch, one owner with title in hand. Serious inquires, phone calls only

special-K 12-14-2019 07:47 AM

Re: NAPCO Thread
 
I don't get the listings that don't show enough in pictures, give minimal info, yet they state "Serious inquiries only". I guess they figure asking for more info or for pictures of the side not shown are considered serious inquiries.

HO455 12-14-2019 02:37 PM

Re: NAPCO Thread
 
1 Attachment(s)
A friend pointed this one out to me. Very similar to the Chevrolet I almost bought back in 88 (if they hadn't cut a 12" by 18" hole in the dash for the hydraulic valves to control the snow plow). If I had known what they would be worth today I wouldn't have passed on it.

https://barnfinds.com/poncho-powered...sletter+(Daily)

chtr65 12-14-2019 11:14 PM

Re: NAPCO Thread
 
Hello, I am actively looking for the front Dana 44 Spicer locking hubs as in post #336. I apoligize ahead of time, I know this is a Napco thread, but I have tried many places and websites with no luck. Does anyone know someone that has these hubs for sale? Thanks in advance

BLAZERMAN 12-15-2019 01:42 AM

Re: NAPCO Thread
 
Quote:

Originally Posted by chtr65 (Post 8643045)
Hello, I am actively looking for the front Dana 44 Spicer locking hubs as in post #336. I apoligize ahead of time, I know this is a Napco thread, but I have tried many places and websites with no luck. Does anyone know someone that has these hubs for sale? Thanks in advance

Try Dougs in Pella Iowa. 641-628-2755

chtr65 12-15-2019 12:33 PM

Re: NAPCO Thread
 
Thanks for the tip. I believe I have called him. But, I will check with him again.

special-K 12-16-2019 08:38 AM

Re: NAPCO Thread
 
What year truck? Do they vary through '69?

chtr65 12-16-2019 06:50 PM

Re: NAPCO Thread
 
The truck is a 66 1/2 ton, K-10. Thanks

special-K 12-18-2019 06:47 AM

Re: NAPCO Thread
 
Oh Ok. What I have are 3/4t. Good luck. They are out there somewhere. Post a WTB. I believe the 67-69s would be the same as '66. Not too sure about back to first GM 4wds

elpound 02-15-2020 04:25 AM

Re: NAPCO Thread
 
1 Attachment(s)
Quote:

Originally Posted by special-K (Post 3054305)

I would love to see some more pictures of this truck. I have a 1957 8500 fire truck I'm acquiring that I'm looking at putting Napco running gear on.

HO455 04-09-2020 10:07 PM

Re: NAPCO Thread
 
Way out of my league, but I wish I had thought of it first.

https://www.legacyclassictrucks.com/...-your-own.html

HO455 04-22-2020 09:31 PM

Re: NAPCO Thread
 
2 Attachment(s)
55 Chevy $12500 I know yellow isn't for everyone but if this actually a Napco the price sure makes it attractive. Not mine. Because if it was I would have posted a lot more photos.

https://yakima.craigslist.org/cto/d/tieton-1955-chevy

55 Chevy shortbox stepside NAPCO 4wheel drives stock running gear, new glass, new carpet, LT1 roller rocker heads, timing cam headers, rebuilt motor low miles
Clear title RARE TRUCK
12,500 POSSIBLE TRADE
TJ jeep, hot rod, harley big bike, trike, NO JUNK NO
Call Donald Sr @ 509- 930-9435

HO455 04-30-2020 04:38 PM

Re: NAPCO Thread
 
5 Attachment(s)
Extra rare 1950 Napco with hubcaps! $15000. Not mine but man I wish it was.


https://seattle.craigslist.org/see/c...110141320.html

Vintage 1950 Chevy NAPCO rare barn find. $15,000
Two stick four-wheel-drive with PTO winch 9 foot stepside long box. Eight lug axles. Needs restoring, one of a kind. Engine upgrade in 1957 to pressurized 235 six cylinder, runs strong. Although they did use the long style water pump so radiator bracket repair is needed have all the parts
Serious inquiries only if you know NAPCO trucks you know this one’s very rare.
Typical floorboard rust. I have many parts that go along with it.
Everything says NAPCO and it’s pre-power pack edition so it’s extremely rare. Two stick Transfer case with the third for the winch. I’ve seen very few conversions with an aftermarket winch on a NAPCO truck of this of era. The winch was purchased in Seattle with a tag that says Seattle Washington. Pretty cool old Truck my interest is turning a different direction right now so it’s up for sale.
A similar restored truck just sold at Mecums auction for 56,000 without the PTO winch. So this truck has great potential.

HO455 05-02-2020 04:33 PM

Re: NAPCO Thread
 
1 Attachment(s)
59 Apache $7000. Not mine. It's an appealing project just less appealing than a divorce.

https://seattle.craigslist.org/see/c...115851715.html

1959 Chevrolet

condition: good
cylinders: 8 cylinders
drive: 4wd
fuel: gas
title status: clean
transmission: manual

I have a 1959 Apache Napco pickup project have most everything and a lot of extra parts 1 extra cab a couple of beds and fenders new body bolt kit has area appropriate 283 body is solid all oem panels no repops $7000obo for everything also have a4speed hydrometric trans $1500obo 907two99three522 Jake

57taskforce 05-02-2020 05:17 PM

Re: NAPCO Thread
 
Quote:

Originally Posted by HO455 (Post 8730808)
59 Apache $7000. Not mine. It's an appealing project just less appealing than a divorce.

https://seattle.craigslist.org/see/c...115851715.html

1959 Chevrolet

condition: good
cylinders: 8 cylinders
drive: 4wd
fuel: gas
title status: clean
transmission: manual

I have a 1959 Apache Napco pickup project have most everything and a lot of extra parts 1 extra cab a couple of beds and fenders new body bolt kit has area appropriate 283 body is solid all oem panels no repops $7000obo for everything also have a4speed hydrometric trans $1500obo 907two99three522 Jake

Man that is a heck of a deal in all honesty. Original Rust free 55-59 body panels are getting crazy hard to find even here in the Southwest, let alone being a napco.

HO455 05-15-2020 11:53 PM

Re: NAPCO Thread
 
1 Attachment(s)
A second AD Napco! Hard to believe but there it is. 1950 Chevy $15950. Not mine. My ad would have had way more pictures in it and it probably wouldn't have those 19.5 wheels. Those are so hard to find.

https://seattle.craigslist.org/see/c...124720329.html


1950 Chevrolet 3 window NAPCO Power-Pak Truck Chassis converted in 1953. 88,000 original miles
All Original and Numbers matching the title. 8 lug NAPCO embossed axle with all tags.
Needs front floor pans. original 216 engine. 19.5 x 5.25 hi lift wheels and tires.

57NAPCO 06-29-2020 09:25 AM

Re: NAPCO Thread
 
https://www.ebay.com/itm/1957-Chevro....c100009.m1982

Brad54 06-30-2020 09:58 PM

Re: NAPCO Thread
 
Quote:

Originally Posted by HO455 (Post 8730808)
59 Apache $7000. Not mine. It's an appealing project just less appealing than a divorce.

https://seattle.craigslist.org/see/c...115851715.html

1959 Chevrolet

condition: good
cylinders: 8 cylinders
drive: 4wd
fuel: gas
title status: clean
transmission: manual

I have a 1959 Apache Napco pickup project have most everything and a lot of extra parts 1 extra cab a couple of beds and fenders new body bolt kit has area appropriate 283 body is solid all oem panels no repops $7000obo for everything also have a4speed hydrometric trans $1500obo 907two99three522 Jake

"It's an appealing project, just less appealing than a divorce."
Oh, I dunno about that... house is clean ALL the time, electric bill is cheaper, water bill is so much cheaper I actually wonder about it, shop is getting outfitted hassle-free, and the dogs give me nothing but love when I go hunting...

57NAPCO 07-16-2020 07:18 AM

Re: NAPCO Thread
 
Two of my favorite toys, I should’ve never got rid of them :waah:

I wonder where the 57 is, I think it went NW to Washington


https://i.postimg.cc/yYspBFjp/DDA81-...-C8-CAA240.jpg

Ol Blue K20 07-16-2020 02:12 PM

Re: NAPCO Thread
 
Quote:

Originally Posted by 57NAPCO (Post 8775546)
Two of my favorite toys, I should’ve never got rid of them :waah:

I wonder where the 57 is, I think it went NW to Washington


https://i.postimg.cc/yYspBFjp/DDA81-...-C8-CAA240.jpg

Wow! That's a looker......

57NAPCO 07-22-2020 09:28 AM

Re: NAPCO Thread
 
Thanks, I was 99% sure it was one of the trucks in the NAPCO promo film climbing Pikes Peak.

jocko 07-28-2020 09:54 PM

Re: NAPCO Thread
 
It couldn't have gone to the NW, that's only where trucks come FROM :)
Musta been tough to sell that beauty. Don't feel bad though, I'm still kicking myself for a few I've sold. Ok, for all the ones I've sold, but still...

57NAPCO 12-28-2020 10:52 PM

Re: NAPCO Thread
 
WOW!

1957 GMC NAPCO 4x4 camper step van - $12,750 (Wylie)


https://dallas.craigslist.org/dal/ct...253714029.html


All times are GMT -4. The time now is 12:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com