The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 16 of 40 « First 61112131415 16 171819202126 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds 88-98 (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=200)
-   -   My 93 CCSSB (https://67-72chevytrucks.com/vboard/showthread.php?t=369443)

highperf4x4 03-30-2010 11:24 PM
Re: My 93 Crewcab Build
 
Right on!! You driving it now then?

joe231 03-30-2010 11:28 PM
Re: My 93 Crewcab Build
 
Yeah, Inquiring minds would like to know......

scotts62 03-31-2010 07:47 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by highperf4x4 (Post 3892136)
Right on!! You driving it now then?
Quote:
Originally Posted by joe231 (Post 3892158)
Yeah, Inquiring minds would like to know......
:lol::lol::lol:

No i dont think the TV cable is adjusting right and im worried about it pissing away 700 bones over something stupid like that...

highperf4x4 03-31-2010 09:31 AM
Re: My 93 Crewcab Build
 
So.............. adjust it right mr. scott

JohnC 03-31-2010 09:34 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3892514)
:lol::lol::lol:

No i dont think the TV cable is adjusting right and im worried about it pissing away 700 bones over something stupid like that...
It's funny how one little thing can cause so much headache.

scotts62 03-31-2010 05:57 PM
Re: My 93 Crewcab Build
 
Yeah no kidding.. i bought a gauge to test the pressures to make sure that the cable is set correctly so hope all going well, ill let you know.. :smoke:

highperf4x4 04-07-2010 10:48 AM
Re: My 93 Crewcab Build
 
How did it go?

joe231 04-07-2010 12:46 PM
Re: My 93 Crewcab Build
 
He's driving it now, if that tells you something ;)

scotts62 04-07-2010 06:59 PM
Re: My 93 Crewcab Build
 
Yep driving the crap out of it :metal:

Next is the crew but think i may try and hit the 62 a bit before the meet ;)

highperf4x4 04-07-2010 10:13 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by joe231 (Post 3906243)
He's driving it now, if that tells you something ;)
I was referring to his trip to the tranny shop. I was going to follow him over there but he had to run another errand first.

joe231 04-07-2010 10:32 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by highperf4x4 (Post 3907300)
I was referring to his trip to the tranny shop.
yeah.....I was too

highperf4x4 04-07-2010 10:45 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3906845)
Yep driving the crap out of it :metal:

Next is the crew but think i may try and hit the 62 a bit before the meet ;)
Any word on the computer in the crew?

highperf4x4 04-08-2010 11:08 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by highperf4x4 (Post 3906046)
How did it go?
Quote:
Originally Posted by joe231 (Post 3906243)
He's driving it now, if that tells you something ;)
Quote:
Originally Posted by highperf4x4 (Post 3907300)
I was referring to his trip to the tranny shop. I was going to follow him over there but he had to run another errand first.
Quote:
Originally Posted by joe231 (Post 3907380)
yeah.....I was too
I guess I better clarify this a little bit for ya.

No, him driving the truck doesn't tell me anything. I already knew he was driving the truck obviously if I was going to follow him to the tranny shop. I was there when he finished putting it in. So, I was wondering what the guy at the tranny shop had to say or whether he made any adjustments to the tv cable.

Since I asked Scott the question not long after he and I had parted ways I must have "over simplified" and thought he'd know what I meant. My apologies spokesman Joe.

scotts62 04-08-2010 06:05 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by highperf4x4 (Post 3907300)
I was referring to his trip to the tranny shop. I was going to follow him over there but he had to run another errand first.
Quote:
Originally Posted by joe231 (Post 3907380)
yeah.....I was too
My bad, yeah i went over there and had him drive it to see what he thought of it, we pulled out on the street and he stands on it then it shifts to second and barks the tires, he says "well i guess its good to go" :lol:
Didnt do anything to the cable so i guess i had it set right to begin with (i hope..)



Quote:
Originally Posted by highperf4x4 (Post 3907422)
Any word on the computer in the crew?
Well i found a couple ground that were burnt in two so i fixed them with the ground strap you gave me and all i have to do is put the new starter on and the manifold then i can see if its really the computer or if i might have gotten lucky and it was just the grounds, but we'll see..

joe231 04-08-2010 10:20 PM
Re: My 93 Crewcab Build
 
hey Scott,
do you have an extra module that we can use to calibrate your speedo?

highperf4x4 04-08-2010 11:04 PM
Re: My 93 Crewcab Build
 
.......................

highperf4x4 04-08-2010 11:16 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3908828)
My bad, yeah i went over there and had him drive it to see what he thought of it, we pulled out on the street and he stands on it then it shifts to second and barks the tires, he says "well i guess its good to go" :lol:
Didnt do anything to the cable so i guess i had it set right to begin with (i hope..)
:lol: right on. Does it have a shift kit in it then?



Quote:
Originally Posted by scotts62 (Post 3908828)
Well i found a couple ground that were burnt in two so i fixed them with the ground strap you gave me and all i have to do is put the new starter on and the manifold then i can see if its really the computer or if i might have gotten lucky and it was just the grounds, but we'll see..
Cool, I'll keep my fingers crossed for ya!

highperf4x4 04-08-2010 11:16 PM
Re: My 93 Crewcab Build
 
.....................

scotts62 04-09-2010 08:05 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by joe231 (Post 3909335)
hey Scott,
do you have an extra module that we can use to calibrate your speedo?
Um i dont think so but ill look, im not sure what they look like to be honest, probably saw it a 100x :lol:


Quote:
Originally Posted by highperf4x4 (Post 3909447)
:lol: right on. Does it have a shift kit in it then?


No shift kit i dont think, he did some valve upgrades they they usually do when they rebuild them.


Cool, I'll keep my fingers crossed for ya!
Thanks!! :metal:

joe231 04-09-2010 08:20 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3909837)
Um i dont think so but ill look, im not sure what they look like to be honest, probably saw it a 100x :lol:
should look like this

http://www.tbichips.com/drac/VSSB%202.jpg

I think the one from the '95 will work.
You could swap it in and we could modify the one out of the '92

JohnC 04-09-2010 08:48 AM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3908828)
My bad, yeah i went over there and had him drive it to see what he thought of it, we pulled out on the street and he stands on it then it shifts to second and barks the tires, he says "well i guess its good to go" :lol:
Didnt do anything to the cable so i guess i had it set right to begin with (i hope..)
Wonder what he would have done if it blew? :lol: :exit:

Glad to hear you got it going man! :thumbs:

Quote:
Originally Posted by scotts62 (Post 3908828)
Well i found a couple ground that were burnt in two so i fixed them with the ground strap you gave me and all i have to do is put the new starter on and the manifold then i can see if its really the computer or if i might have gotten lucky and it was just the grounds, but we'll see..
Right on man. I hope the fix is that easy.

scotts62 04-09-2010 05:45 PM
Re: My 93 Crewcab Build
 
Yeah that would have sucked if it did blow but then he would have to pull it out again :lol:

Joe- i dont remember seeing that around behind glove box.. ill look in my pile of crap, i mean parts and see if i can find it.

joe231 04-09-2010 05:50 PM
Re: My 93 Crewcab Build
 
Quote:
Originally Posted by scotts62 (Post 3910638)
Yeah that would have sucked if it did blow but then he would have to pull it out again :lol:

Joe- i dont remember seeing that around behind glove box.. ill look in my pile of crap, i mean parts and see if i can find it.
I think it may be mounted to the computer mount, IIRC.

scotts62 04-09-2010 10:01 PM
Re: My 93 Crewcab Build
 
Dont remember seeing it, hope it didnt go with the dash...

joe231 04-09-2010 10:25 PM
Re: My 93 Crewcab Build
 
:dohh:
that would suck!
Story of my life though :lol:


All times are GMT -4. The time now is 07:21 AM.
Page 16 of 40 « First 61112131415 16 171819202126 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com