The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 17 of 26 « First 71213141516 17 1819202122 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The 60-66 "PAYING IT FORWARD" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=671262)

PMDc 07-17-2017 09:16 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
5 Attachment(s)
Radiator from 1962 C-10 235 6-Cyl Manual Transmission

My local radiator shop wanted $675 to re-core it due to the many leaks and previous repairs done so I ordered a new one.

I hate to throw it away if someone has a use for it.

Located in Auburn, IN

You pay shipping 26.5lbs, Box is oversize for UPS 9"x31"x34"

Cooper197 07-28-2017 12:53 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
4 Attachment(s)
Pan hard bar has been shipped out.
Still have the bumper if anybody wants it. I'll probably take it to scrap metal in a week or two if it's still in my garage.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

ACK 07-28-2017 03:45 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Cooper197 (Post 8002307)
https://westernchassisinc.com/1960-7...-Panhard-Bars/

Adjustable pan hard bar for 65-72 C10. Bought it for my truck but I have a newer rear end so it doesn't fit. Never got around to returning so now it's just taking up space.
Was $59.99 new, obviously free to whoever wants it.

Located in Eugene, OR. Can pick it up or ship it on your dime.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.
I'm withdrawing the panhard bar request, just realize '64 used a different length.

sofilofi 07-30-2017 10:16 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Cooper197 (Post 8002307)
https://westernchassisinc.com/1960-7...-Panhard-Bars/

Adjustable pan hard bar for 65-72 C10. Bought it for my truck but I have a newer rear end so it doesn't fit. Never got around to returning so now it's just taking up space.
Was $59.99 new, obviously free to whoever wants it.

Located in Eugene, OR. Can pick it up or ship it on your dime.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.
I'll take the panhard bar,if it's still available.Shipped to 90604.
Thanks,
Jesse

oem4me 07-30-2017 08:58 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Cooper197 (Post 8002307)
Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.
I would love to have that bumper and hitch, too bad I'm a thousand miles away. :waah:

- you don't happen to be planning any trips to Bend, or eastern Oregon in the very near future do you? I'm heading up that way very soon.

Cooper197 07-30-2017 09:36 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by sofilofi (Post 8003491)
I'll take the panhard bar,if it's still available.Shipped to 90604.
Thanks,
Jesse
Jesse I responded to your PM.

Quote:
Originally Posted by oem4me (Post 8003868)
I would love to have that bumper and hitch, too bad I'm a thousand miles away. :waah:

- you don't happen to be planning any trips to Bend, or eastern Oregon in the very near future do you? I'm heading up that way very soon.
I love Bend and grew up over there, but unfortunately I've got a crazy few months at work ahead of me. Don't think I'll be over there any time soon.
Eugene is a pretty day trip from Bend though!

sofilofi 08-09-2017 12:24 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
[QUOTE=Cooper197;8003899]Jesse I responded to your PM.



Got the Panhard bar,very cool.
Thanks,
Jesse

Cooper197 08-11-2017 02:23 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
[quote=sofilofi;8012238]
Quote:
Originally Posted by Cooper197 (Post 8003899)
Jesse I responded to your PM.



Got the Panhard bar,very cool.
Thanks,
Jesse
Glad to hear it arrived and that it's going to get some use!

BFD305 10-20-2017 12:39 AM
COLORADO - 1965 Spindles, drums, brake lines, master cylinder
 
Original front end parts from my 65 C10

All were in good working condition. Front brake lines came off well too.

Free for the taking.

mrjata 11-09-2017 12:57 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Anyone want the original Eaton rear from my '60? NW Missouri

MASTERBrian 11-09-2017 01:23 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by mrjata (Post 8078464)
Anyone want the original Eaton rear from my '60? NW Missouri
Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.

66-PMD-GMC 11-09-2017 09:23 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I'd like the panhard bracket off of it...
Whattaya say...?
I'd gladly pay for the ride..
;-)

mrjata 11-09-2017 10:59 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Quote:
Originally Posted by MASTERBrian (Post 8078476)
Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.
I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.

MASTERBrian 11-09-2017 02:14 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Quote:
Originally Posted by mrjata (Post 8078644)
I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.
Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks

mrjata 11-11-2017 12:14 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by MASTERBrian (Post 8078803)
Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks
You are on it. No clutches found in there.

The Rocknrod 12-06-2017 01:42 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.

Stepside6.5 12-06-2017 02:01 PM
I would be interested 43015

Rick
Posted via Mobile Device

The Rocknrod 12-06-2017 02:25 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by The Rocknrod (Post 8098097)
Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.
Quote:
Originally Posted by Stepside6.5 (Post 8098127)
I would be interested 43015

Rick
Posted via Mobile Device
USPS Flat Rate Box - $13.60
Fedex Ground 3 day - $13.80

kennyw 12-06-2017 03:48 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I have a 6 cylinder engine one hour north east of Seattle, WA. Pulling it out of a 64 Chevy very soon. Looks like a 250 but not sure since out is not original. Didn't run when i got the truck and I have put no effort into getting it running. Free if you want to help pull it. I don't want to store it. PM me for more info.

raidmagic 01-03-2018 10:02 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
How much to get the door panels to 33510?


Quote:
Originally Posted by Jimal (Post 7974357)
Somewhere along the way I dropped the door panels from the discussion

https://photos.smugmug.com/Other/Mis...IMG_7356-L.jpg

https://photos.smugmug.com/Other/Mis...IMG_7358-L.jpg

Someone take these door panels and scuttle before I get tired of tripping over them.

Stepside6.5 01-04-2018 12:07 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.

Rick
USMC

The Rocknrod 01-04-2018 10:07 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Stepside6.5 (Post 8151432)
MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.
Rick
USMC
Sent you a PM Rick.

Stepside6.5 01-05-2018 08:25 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Payment sent

LostMy65 01-06-2018 03:05 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Cooper197 (Post 8002307)
Pan hard bar has been shipped out.
Still have the bumper if anybody wants it. I'll probably take it to scrap metal in a week or two if it's still in my garage.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.
I'm coming down to Salem in February.
If you still have it then, I'd love to have it.

The Rocknrod 01-06-2018 03:47 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Stepside6.5 (Post 8152867)
Payment sent
Got it, will send it Monday.


All times are GMT -4. The time now is 03:35 AM.
Page 17 of 26 « First 71213141516 17 1819202122 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com