The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 18 of 26 « First 81314151617 18 1920212223 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The 60-66 "PAYING IT FORWARD" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=671262)

Rusty63 01-21-2018 09:33 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

Rpederson46 01-27-2018 07:03 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
3 Attachment(s)
I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.

LVPhotos 01-29-2018 12:42 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.

allchevy58 01-29-2018 11:18 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
2 Exhaust brackets off a 64' C30. Shipped from 89508.

slepysal 01-30-2018 12:00 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by LVPhotos (Post 8173148)
Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.
I ll take the jack mount Shipping to Ca 95112 ?

slepysal 02-02-2018 01:31 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
passing on under seat jack mount

Tom bunch 03-13-2018 03:37 PM
Quote:
Originally Posted by Rusty63 (Post 8166839)
Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..
Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device

Rusty63 03-13-2018 06:31 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren

pimpston65 03-13-2018 06:36 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by PMDc (Post 7993309)
Radiator from 1962 C-10 235 6-Cyl Manual Transmission

My local radiator shop wanted $675 to re-core it due to the many leaks and previous repairs done so I ordered a new one.

I hate to throw it away if someone has a use for it.

Located in Auburn, IN

You pay shipping 26.5lbs, Box is oversize for UPS 9"x31"x34"
did anyone take u up on the radiator? if not whats shipping to 48206 thanks...

Tom bunch 03-15-2018 01:38 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
No problem thanks for the reply back

msg 03-18-2018 04:05 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps.

allchevy58 03-25-2018 09:05 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
5 Attachment(s)
Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.

allchevy58 03-25-2018 09:06 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
2 Attachment(s)
Here's sill plates. shipped from zip 89508.

allchevy58 03-25-2018 09:12 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
3 Attachment(s)
Also have a west coast mirror bracket, right side, I took off 64 C30, didn't match left side. Shipped from zip 89508.

Larry64 03-25-2018 09:37 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I will take the under bed tire carrier Shipped to 37091

Bentbolt 03-25-2018 10:37 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Tom bunch (Post 8210929)
Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device
I have a tank and sender I would let go. I bought the truck and drove it home 3.5 hours, it holds gas. Send me a pm and we can work it out

oem4me 03-26-2018 12:37 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by allchevy58 (Post 8221680)
Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.
Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce

Larry64 03-26-2018 08:39 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I will take the Jack hold down parts. Shipped to 37091

Pontiacgurudan 03-26-2018 07:52 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I'll take the sill plates shipped to 63052 if still available.

allchevy58 03-26-2018 09:07 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Larry64 (Post 8221722)
I will take the under bed tire carrier Shipped to 37091
I'll check shipping cost and let you know.

allchevy58 03-26-2018 09:14 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
[QUOTE=oem4me;8221903]Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce[/QUOTe
Hi Bruce, I'll box it up and let you know. Cameron

allchevy58 03-26-2018 09:15 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Pontiacgurudan (Post 8222671)
I'll take the sill plates shipped to 63052 if still available.
Still available, I'll let you know. Thanks

Larry64 03-26-2018 09:20 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Thanks. PM me the cost & how to pay you.

allchevy58 03-28-2018 11:09 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Larry64 (Post 8221722)
I will take the under bed tire carrier Shipped to 37091
Shipping comes to $40.82 USPS.

allchevy58 03-28-2018 11:14 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Pontiacgurudan (Post 8222671)
I'll take the sill plates shipped to 63052 if still available.
Shipping comes to $14.24.


All times are GMT -4. The time now is 03:20 AM.
Page 18 of 26 « First 81314151617 18 1920212223 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com