The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)

- - Project SHKNBK (https://67-72chevytrucks.com/vboard/showthread.php?t=765876)

Bramante

09-05-2018 09:48 PM

Re: Project SHKNBK

4 Attachment(s)

A little brake booster modification. With that bracket behind it it stuck out about 20"! Unacceptable.. I was going to bend up the brake lines today but I couldn't stop staring at it, it's just so ugly. Its much more tolerable now.

LockDoc

09-05-2018 09:56 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8338237)

Yeah, they do stick out quite a ways. It isn't as noticeable after you get everything else bolted in there.... And the hood on...:)

LockDoc

Bramante

09-05-2018 10:49 PM

Re: Project SHKNBK

Quote:

Originally Posted by LockDoc (Post 8338240)

Yeah, they do stick out quite a ways. It isn't as noticeable after you get everything else bolted in there.... And the hood on...:)

LockDoc

Haha hey hey, soon enough (well not soon enough) it'll be in one piece again :waah:

Bramante

09-07-2018 08:41 PM

Re: Project SHKNBK

3 Attachment(s)

Getting there! I'm hoping by the end of next week the long block will be assembled. I'm dying to hear this baby run!

Bramante

09-07-2018 08:44 PM

Re: Project SHKNBK

1 Attachment(s)

I also got the body back on the frame with the new body mount bushings.

Average Joe

09-07-2018 08:53 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8339818)

I also got the body back on the frame with the new body mount bushings.

You dont mess around. Great progress!

Bramante

09-07-2018 09:13 PM

Re: Project SHKNBK

Quote:

Originally Posted by Average Joe (Post 8339825)

You dont mess around. Great progress!

My goal is to get it dyno'd by the end of October, we'll see how it goes!

pwdcougar

09-09-2018 09:25 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8284115)

Discovered an obscene amount of body filler and some ugly sins under it. Time to start grinding away..
:m2:

How did you get the left lower patch to fit???? Mine lays nice along the bottom but the top edge is bowed way out.

Paul

Bramante

09-09-2018 10:37 PM

Re: Project SHKNBK

Quote:

Originally Posted by pwdcougar (Post 8341077)

How did you get the left lower patch to fit???? Mine lays nice along the bottom but the top edge is bowed way out.

Paul

All edges of mine layed flat. Didn't have to fiddle with it at all really. Was your panel stilling around for a little? Maybe it bent a little

pwdcougar

09-09-2018 10:43 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8341139)

All edges of mine layed flat. Didn't have to fiddle with it at all really. Was your panel stilling around for a little? Maybe it bent a little

It’s been on the shelf for a couple years. It doesn’t look bent. I’ll spend some time with it again tomorrow.

Paul

Bramante

09-14-2018 10:51 PM

Re: Project SHKNBK

2 Attachment(s)

Yeesss :devil: Super pumped to get the motor back today. I just sat the blower on top because, you know, it just has to happen:frog:

04ls1gto

09-15-2018 06:21 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8344636)

Yeesss :devil: Super pumped to get the motor back today. I just sat the blower on top because, you know, it just has to happen:frog:

Sweet, what are specs on motor?

kev2809

02-13-2019 06:40 PM

Re: Project SHKNBK

Quote:

Originally Posted by Bramante (Post 8344636)

Yeesss :devil: Super pumped to get the motor back today. I just sat the blower on top because, you know, it just has to happen:frog:

whered the progress go?? nice so far tho..looks fun

All times are GMT -4. The time now is 04:38 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page