Re: Crocodile Rocks Build Thread
Great progress!
|
Re: Crocodile Rocks Build Thread
Coming along nice
|
Re: Crocodile Rocks Build Thread
Good lookin truck bud Keep it up !
|
Re: Crocodile Rocks Build Thread
Truck looks great. Let me if your gonna go to some shows I'd like to check this thing out. Lyman isnt far from me, im actually closer to greer than spartanburg if you ever need a hand with something just lmk.
Posted via Mobile Device |
Re: Crocodile Rocks Build Thread
Quote:
Bluex - I'm not to the point of doing any shows yet, but you're welcome to come check it out sometime. Just shoot me a message and we'll work something out. A few of us in the Upstate have been trying to put together a get-together - I'll add your name to my list of contacts when we work something out. Thanks for the help offer, too. I kind of killed my budget trying to get it ready for the C10 Cruise In last weekend, so I don't have anything planned for it till fall at this point. But if you need a hand with something, let me know. - Matt |
Re: Crocodile Rocks Build Thread
Will do and for sure let me know about any get together. I have to get tags and insurance back on mine but I hope to get that done here soon so I can drive it.
|
Re: Crocodile Rocks Build Thread
3 Attachment(s)
Not a lot of progress since my last post. I took the truck up to the C10 Cruise In in Mooresville, NC which was a blast. It was cool to take a truck that I had completely torn apart months earlier on a 2 hour each way road trip. She did great with one exception. I had a tire come apart on the highway coming back. It didn't loose air, but the tread came clear off. I was able to limp it to a used tire place where they sold me a leaky replacement. We made it a few miles down the road before a second tire came apart. At this point I decided that I needed to buy some new tires. It took stops at 5 places before we found someone who could replace two of the tires, so I got two new Pepboys Futuras for the ride home. It took us less than 2 hours to get there and about 5 hours to get home.
Last week I spent some time painting the rally wheels and I bought two new tires to replace the last old one and the leaky one. Now I have 4, new, matching tires and some much better looking wheels. I found a set of center cap stickers cheap on Ebay to finish them off. They're not perfect, but I think they came out OK. |
Re: Crocodile Rocks Build Thread
Really nice truck you started with. Nice job on the air install too.
|
Re: Crocodile Rocks Build Thread
Looks great. Love the air ride before and after pics!
|
Re: Crocodile Rocks Build Thread
Quote:
|
Re: Crocodile Rocks Build Thread
5 Attachment(s)
After driving the truck a little for few months this summer, I decided that I wanted to go a little lower. I liked how it looked when it was aired out, but the ride height was too close to stock.
That in mind, I called up Travis at Pro Performance and ordered a set of McGaughy's 2.5" drop spindles. While I had everything apart I went ahead and replaced the 1/4" fittings and lines with 3/8" lines so that my plumbing is ready when I switch from schrader valves to a AccuAir valve block. I haven't done anything to the rear just yet other than remove the stock bump stops. With them out, the frame sits on the axle housing. I wanted to see it with the spindles installed before I made a decision about what to do out back. I might just remove the upper bag cup so that it's ride height is lower. It won't help the aired out stance, but it will make it more level at ride height. I have just less than 2" before the pumpkin hits the bed floor, so I could do a small notch without having to cut the floor. Decisions, decisions, decisions... Here are some mid tear apart pictures, a side by side of the stock and drop spindles and a few pics of it back together and at ride height. |
Re: Crocodile Rocks Build Thread
5 Attachment(s)
And here are some aired out pictures. I'm pretty happy! :lol:
|
Re: Crocodile Rocks Build Thread
Sick, I love it.
|
Re: Crocodile Rocks Build Thread
Your ride height is to high....
You still planning on hitting that show Saturday? Posted via Mobile Device |
Re: Crocodile Rocks Build Thread
I love it! Stoked I found this I'm in the middle of doing the same exact thing. Very glad you took pics along the way and after every mod. You just got me motivated. I'm on 2" spindles with a cpp c notch in the rear. That thing is slammed! I love the stance
Posted via Mobile Device |
Re: Crocodile Rocks Build Thread
Thanks for the feedback everyone!
Quote:
I think I'll take the upper bag cups out which will lower the back another 2" or so at ride height. And eventually I'm going to notch the frame. Should help things out back. Yeah - I think I'm going to go if the weather holds out. I'll post something in the SC/NC area. Quote:
- Matt! |
Re: Crocodile Rocks Build Thread
this is really making me want to bag mine... awesome
|
Re: Crocodile Rocks Build Thread
Yeah Matt I had the same problem. Most of the ones I found bagged were either on a dropmember, z'd or aftermarket/moded lca's so I'm glad I was able to see your set up with cups plates and spindles. Keep posting great pics. If your considering the notch the cpp notch was pretty simple to do and you'll get that much lower in the rear
Posted via Mobile Device |
Re: Crocodile Rocks Build Thread
Matt,
Cant wait to see it all dialed in. Hope you dont mind, but I might be sending you a couple of PM's asking some questions |
Re: Crocodile Rocks Build Thread
Quote:
|
Re: Crocodile Rocks Build Thread
Looks good bro
|
Re: Crocodile Rocks Build Thread
Could you post a pic at ride height if you get a chance?
|
Re: Crocodile Rocks Build Thread
5 Attachment(s)
Here are some current ride height pictures - Porterbuilt stage one front & rear, 2.5" drop spindles, stock arms, no notch, 70psi front, 30psi rear.
And since I can add 5 pics in one post, I added my favorite shot with it aired out. Enjoy! |
Re: Crocodile Rocks Build Thread
Nice thanks Matt. Whats your tire height? Just put bags on my truck and it's low aired out but ride height I'd imagine will be high. I may consider control arms
|
Re: Crocodile Rocks Build Thread
My tires are 275/60R15. I didn't measure, but according to a chart I found they're 28" tall.
|
All times are GMT -4. The time now is 11:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com