Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

http://i15.photobucket.com/albums/a3...eb03352708.jpg

http://i15.photobucket.com/albums/a3...0309-27-08.jpg

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

my ride

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

When you are trying to fit 18.5 to 21" wide tire in the back..... I have only 3.5" of backspacing on my wheels. 1.5" clearance on the frame rails and 1" clearance on the outer fender lip. I cant stand the little tire in the HUGE wheel well look!

My axles from Strange are only 28 inchs long each.

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

I was running a stock pbar and the swing was enough to piss me off my new bar goes from the PS outside fram to the outside of the trailiing arm..its like 42" long....My wheels are stock rallies that I had 6" added to the back space with stock front space....I'm waiting for them.... as soon as I get them painted and mount the tires so I can see if this is all going to work....I'm worried about tire hitting inner bed at dump?? my axles are stock..and open...booooo!!

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

I might put a jack on the frame behind the fuel cell, pull the springs out. Put the truck at ride height, then lower it a few inches with the jack and see how close those tires come to the frame rail. I'd be concerned the when the PH bar is level, you might be touching tire to frame.

You might have already checked the geometry, but if not, better to find out now..

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Truck has already been down the road for awhile. I have had the truck down even lower than it is now. I settled on this ride height because of the nice rake it has with the body lines. I do appreciate the concern.;)

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

hey can anyone tell me how much they tubbed theres I have my bed apart for the fit but I'm looking at where my wheel well will be best I can figure I need about 41" that will put me even with the frame rails..I'm also conserned about the inner skin where it welds to the outside skin...am I going to have issues there??

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Running 33x18.5x17 9" back space 64 stepside http://i771.photobucket.com/albums/x...4/100_1262.jpg

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Here ya go

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

what kind of blower is on that camaro?

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

They said it came of a Freight Train.

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

I need to start a build thread but this truck has been torn down and changed too much, so I'll just post pics where I can.

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

whats the widest wheel and tire you can fit under a stock 72 c10 half ton. Well of course lowered bout 4 to 5 inches. Backspacing specs and all on the wheels

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

I'm having 5" of backspaceing added to a stock rally wheel ..My plan is to just tub it and relocate the E brake cable...one thing I did do is relocate my panard bar from stock to from the back of the trailing arm to the oposite side outside frame ( 42" ) I have amost no side travel with 1" blocks and bags in the stock spring location and a C notch...my wheels "should" be here at teh end of the week

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

What did it cost and who is doing the wheels?

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

hottrucks who's bar did you go with? Would it clear a aftermarket Diff cover? I need to go with a long bar to help the launch.

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

I went with Stockton Wheels and had them build me a 6 hole 17x12 with a 9" backspace on a stock rearend look at my site :chevy:

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Cheap.....I was quoated $60 a wheel..the compnay is out of NY he's making up the jig to make any width you want I'll let you know and post a pic when they get here

I built my bar and hanger I'm running cup car trailing arms they had a hanger for an adjustable bar but it was on the driversside so I fabbed up the bar and hanger ( on te outside of the frame to add a couple more inchs ....at full dump ( my axle U bolts just clear the sides of frame) when at ride height I'm about 1/4" off..the angle of the hanger on the truck arm is aimed so it clears my stock cover pretty well and since I was fabbing the hanger I kinda put it where I wanted???

heres a pic sorry its not all shiny and painted yet te second pic is the issue with a C notch and the U bolt clearance if you need one of the hanger on the frame I can get it but its nothing but aHanger that goes from the frame down about an 1" below the frame with a hole in it??

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Hoosier Prostreet Radials 31x18.5x15. 14 in. Weld wheels with 7.5in backspacing. Stock suspension except for coilovers. Rearend is narrowed total of 6in

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

looks like you need to step up to the 80's cause I didnt have any problems stuffing the 33x21.5x15's under my bed... :lol:

http://i7.photobucket.com/albums/y25...uck/clean4.jpg

http://i7.photobucket.com/albums/y25...ck/HOOD010.jpg

http://i7.photobucket.com/albums/y25...ruck/tires.jpg

http://i7.photobucket.com/albums/y25...truck/rear.jpg

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Well Bud,

Any bigger and I will have to start cutting and welding.
My Ford 9" Rear End is not narrowed at this time.

Thanks,
http://67-72chevytrucks.com/vboard/a...1&d=1267932929
http://public.bay.livefilestore.com/...0823081142.jpg
http://67-72chevytrucks.com/vboard/a...1&d=1228321620
http://67-72chevytrucks.com/vboard/a...1&d=1228087389
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Hottrucks, thanks that's way cool. Cup arms look much stronger than factory ones.

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

not sure if there any stonger but they are MUCH CHEAPER ($100 at my door) they have ball mounts for the X mamber and the P bar bracket is on it...
along with a place to mount a sway bar

I would do it agin in a heartbeat

Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
 

Are the cup arms as heavy as the truck arms?