The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   CA Parting 72 Urban (https://67-72chevytrucks.com/vboard/showthread.php?t=518706)

JBerno 04-10-2012 07:46 PM

Re: Parting 72 Urban
 
Looks good Ray, thanks again
Posted via Mobile Device

cleszkie 04-10-2012 08:28 PM

Re: Parting 72 Urban
 
Is the chrome cowl straight and free of blemishes? If so, how much with shipping to Santa Ana, CA 92707? Thanks.

KrazyRay 04-10-2012 11:30 PM

Re: Parting 72 Urban
 
The cowl has some surface rust. Prob not good enough for show.
Thanks,
Ray

cleszkie 04-11-2012 05:17 PM

Re: Parting 72 Urban
 
A little rust may not be a deal killer. My project is not a show vehicle. Can you take some pics of the worst areas? Thanks.

KrazyRay 04-11-2012 10:11 PM

Re: Parting 72 Urban
 
3 Attachment(s)
The worst areas are at the wipers and there are some scattered spots of surface rust. There are some scratches that may buff out on the driver side. Pics are hard to see on chrome. $30 plus shipping, but I will need to find a long box for it.

KrazyRay 04-11-2012 10:18 PM

Re: Parting 72 Urban
 
rockc...The shipping for the passenger side trim is $20 for a total of $35 shipped.
Thanks,
Ray

sunk99 04-11-2012 11:08 PM

Re: Parting 72 Urban
 
Do you have a tail light wiring harness that runs from under dash to the tail lights?

KrazyRay 04-12-2012 12:30 AM

Re: Parting 72 Urban
 
Sorry, the harness is chopped up.
Thanks,
Ray

sunk99 04-12-2012 09:54 AM

Re: Parting 72 Urban
 
Quote:

Originally Posted by KrazyRay (Post 5308520)
Sorry, the harness is chopped up.
Thanks,
Ray

Ok thanks
Posted via Mobile Device

medicman775 04-12-2012 03:21 PM

Re: Parting 72 Urban
 
Interested in the steering column. Condition? Pics? I could pick up depending on shipping cost to 89436

cleszkie 04-12-2012 04:52 PM

Re: Parting 72 Urban
 
Ray

I will take the cowl for $30 plus shipping. Let me know what shipping will be once you locate a long enough box and I will make a Paypal deposit. Thanks.

KrazyRay 04-12-2012 07:15 PM

Re: Parting 72 Urban
 
medicman...This column is from a 68. I have some 69-72 columns that I can post pics tomorrow. Shipping will be $17 to Sparks.

cleszkie...I will get a box by Monday from the local appliance store.

Thanks,
Ray

blap 04-12-2012 08:13 PM

Re: Parting 72 Urban
 
Interested in the RH windsheild post shipping to 06010

medicman775 04-12-2012 09:16 PM

Re: Parting 72 Urban
 
Thanx Ray...I will check for pics tomorrow.

notsolo 04-12-2012 10:13 PM

Re: Parting 72 Urban
 
[QUOTE=KrazyRay;5305647]pics[/QUOT]

Hello I am interested in dash bezel and metal 7 hole cut out Shipping to 21863...Thanks ....Ed

KrazyRay 04-12-2012 11:41 PM

Re: Parting 72 Urban
 
blap...$25 plus shipping. How much of pillar do you need?

medicman775...pics coming AM

notsolo...Sorry all chrome stuff sold.

Thanks,
Ray

KrazyRay 04-12-2012 11:44 PM

Re: Parting 72 Urban
 
The tub is going for scrap very soon. Patch panels $25 up. Please ask soon.
Thanks,
Ray

OLEBEATER 04-13-2012 10:10 AM

Re: Parting 72 Urban
 
hey Ray, interested in the booster/mc and the slot wheels, did the booster and brakes work good? Do you kno the width of the wheels? I'm going to use the brake set up on a C10 so I'm assumeing it will work for me. Get me a total with shipping to 22572 Va. and I will let you kno. Thanks........Roland

KrazyRay 04-13-2012 11:54 AM

Re: Parting 72 Urban
 
Roland...I don't know on the brakes because a brake line was cut by a thief who mistook it for the AT line when stealing the radiator. $75 total shipped for the brakes. The wheels cost $25 per wheel for shipping to east coast. I think they are 15x8, but I will measure.
Thanks,
Ray

OLEBEATER 04-13-2012 12:31 PM

Re: Parting 72 Urban
 
I'm not to concerned about the m/c as much as what the condition is of the booster. Wish there was a way to kno that. I'll let ya kno on the wheels when the width is known. Would you consider selling the booster separate? Thanks..........

Littletony 04-13-2012 12:34 PM

Re: Parting 72 Urban
 
If Oldbeater passes on the rims I would like to be next in line if they are 15x10.

KrazyRay 04-13-2012 01:16 PM

Re: Parting 72 Urban
 
3 Attachment(s)
pics of column I will be back to the suburban later today.

KrazyRay 04-13-2012 11:52 PM

Re: Parting 72 Urban
 
5 Attachment(s)
The 2 slot wheels are 15x10, but they are different brands. The profiles are very close and should work good on different sides of the truck. OLEBEATER is first up on the wheels. I don't want to separate the booster at this time.

KrazyRay 04-14-2012 12:13 AM

Re: Parting 72 Urban
 
5 Attachment(s)
Here's some cheap parts from this suburban:
back seat...$10 local
back seat front mounting brackets...$5 pair plus shipping
rear driver side window regulator needs help...$5 plus shipping
rear driver side window track...$5 plus shipping
barn door latch hardware missing 1 linkage rod...$10 plus shipping for all
barn door handle (same as passenger door)...$5 plus shipping
barn door hinges some wear, but very useable...$10 plus shipping
top barn door slides...$10 pair plus shipping

I will give package deals on these parts.

Thanks,
Ray

medicman775 04-14-2012 12:18 AM

Re: Parting 72 Urban
 
Do you have a pic of the back seat?


All times are GMT -4. The time now is 03:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com