Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

another pic of the passengers side door, rust repaired and speaker hole fixed.:chevy:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

getting ready to pull the bed and cab.:gmc2:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

I got the cab pulled of of it now.:gmc2:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

the clear was peeling on the roof, i am stripping the clear off here and getting ready to prime it.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

nice work bro.......

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

welding up a small crack on the drivers side cab post.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

got the bed off and i have to fill a few holes on the top where it had rails screwed on it.:gmc2:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

the firewall is ready for the last primer coat before the paint.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

and a pic of the frame.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

Looking good, making quick work of it.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

this build should have been called Speedy Gonzales!

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

I have had it for 4 years it is time to work now. i work on it almost every night and every saturday.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

I have been working really hard on this one trying to get some work done before this summer it will be to hot to work on it.:gmc2:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

this is a before pic. the clear peely in spots, and needing some work.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

final coat of primer then i used rock guard on the top of the firewall and down low. it looks alot like the factory sound deadener down low.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

now then time to use non sanding sealer and ready for base coat.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

now 3 coats of 514 orange red base coat.and 3 coats of clear.:gmc2:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

Nice work...and I really like that shop...roomy!!

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

:chevy:[QUOTE=cable666guy;5895223]Nice work...and I really like that shop...roomy!![/QUO it helps to have room when you pull the body off.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

welding in the cpp rear frame notch.:chevy:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

the roof has been stripped of the peeling clear and in the prime now.:chevy:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

i put on some body filler on the frame notch.:chevy:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

and i used a some driveshaft tubing from a 1995 model international 4900 series bob truck for a exhaust pass thru the crossmember. it is 4 inches in diameter.

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

and some 2k primer for the frame.:chevy:

Re: Project orange 468 bigblock 1970 gmc to 1972 chevy
 

:metal:Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device