Re: Parting out 88' Suburban 4x4
 

If you take the fuel tank out, can you please take a pic of the connector at the sending unit for the Fuel Pump? I have a new sending unit but need the truck side connector to wire in. Please let know if you have it, and how much shipped to Atlanta, 30044.
Thanks,
Jay

Re: Parting out 88' Suburban 4x4
 

Did the bumper sell? How much for the rear "Wind deflector"? Thanks,

Rob

Re: Parting out 88' Suburban 4x4
 

Ok. I really didnt plan on pulling the tank. The earliest I can start pulling more parts off would be next week sometime. I'm swamped busy with farm work at the moment

Re: Parting out 88' Suburban 4x4
 

The bumper did not sell yet. It's not in the best shape. It has a fist size dent on the left hand side and a couple of spots where the chrome is cracked. The rear window deflector ......does $40 + shipping sound fair?

Re: Parting out 88' Suburban 4x4
 

Do you have the air distribution duct/vent that is located under the center of the dash directly in front of the hump? if so please send pics and ship quote to 87124. Thanks in advance!

Re: Parting out 88' Suburban 4x4
 

The duct that runs from the air box to the far left vent?

Re: Parting out 88' Suburban 4x4
 

Thanks for the quick reponse, it's located under the dash in the middle. The part I need should be pointing down at the hump of the truck/burb. It's the duct the distributes the air, if you don't have this duct your ac won't blow cold from the upper/top vents.

Re: Parting out 88' Suburban 4x4
 

Ok I know what your talking about. I will check when I get home and see if its still there

Re: Parting out 88' Suburban 4x4
 

Can you post some more pictures of how the deflector attaches and give me a measurement of how far apart the attachment points are? Sorry for all of the questions, but I'm "customizing" something and need to make sure it will fit. TIA!

Re: Parting out 88' Suburban 4x4
 

Sorry bud but someone must have removed it before I got it. I will keep my eye out for one

Re: Parting out 88' Suburban 4x4
 

I will try and get you some pics late tonight or tomorrow.

Re: Parting out 88' Suburban 4x4
 

Ok, Thanks!!!

Re: Parting out 88' Suburban 4x4
 

Nice paint job! Pics and price of passenger side mirror to 33823

Re: Parting out 88' Suburban 4x4
 

How about all the front and middle seat belts? Are they in decent shape?

Re: Parting out 88' Suburban 4x4
 

Any idea if the wiper motor was in good working order?
Also might be interested in the delay control module if it had intermittent wipers.

Thanks

Re: Parting out 88' Suburban 4x4
 

I'm interested in the motor mounts with all nuts and bolt hardware. Please provide a photo if possible.

Re: Parting out 88' Suburban 4x4
 

Looking for motor stands

Re: Parting out 88' Suburban 4x4
 

I am looking for the 7 pin seatbelt / headlight buzzer module.