Re: The 60-66 "PAYING IT FORWARD" thread!
Id like the shop manual, and the steering box if still available.
I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM. Thanks, Keith |
Quote:
Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.
The 66 had gauges and hazard light switch. The 62 had idiot lights. |
Re: The 60-66 "PAYING IT FORWARD" thread!
All from a 1964 C10:
* Used master cylinder - Single reservoir original type * Approximately 2 year old used master cylinder - Single reservoir original type * Used OEM track bar * Radiator. Has leak Local pickup only. |
Re: The 60-66 "PAYING IT FORWARD" thread!
I need the 66 wiring harness. Mine is all taped up and ready to start a fire.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
New repro 64-66 2wd gas pedal.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
2 Attachment(s)
I posted these awhile back and had no takers. Here goes again.
Four hub caps from a 62 C20 with 17.5 tubeless wheels. Five 17.5 tubeless wheels with good clips for the caps. I can ship the hubcaps. The wheels need to be picked up. For the wheels - If no arrangements are made or they are not picked up by the end January, they're off to the recycler. I'm cleaning house. Located in Los Gatos, Ca. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
4 Attachment(s)
All from a 1964 C10:
* Used master cylinder - Single reservoir original type * Approximately 2 year old used master cylinder - Single reservoir original type * Used OEM track bar * Radiator. Has leak * Left and right doors. |
Re: The 60-66 "PAYING IT FORWARD" thread!
72cs20, I'll take the 62 wire harness if it's still available.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
72CS20 just got the wiring harness today! It's in great condition and I can even read the lettering on the fuse block! Already got my fire-hazard wiring out. Going to get on cleaning this one up and ready for install. Thank you very much. Good looking out!
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Tom |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Andy |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Thanks Tom |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
Quote:
|
Quote:
Posted via Mobile Device |
All times are GMT -4. The time now is 01:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com