Re: bucket seats and consoles
1 Attachment(s)
here is what is going in mine. a set out of a 2006 dodge ram. they are leather and power! building the new brackets was a bit tricky, but it all worked out.
|
Re: bucket seats and consoles
5 Attachment(s)
Late to the party but here's mine in my 72 GMC Short/Fleet.
|
Re: bucket seats and consoles
Roger what are they out of?
|
Re: bucket seats and consoles
roger i would also like to know
|
Re: bucket seats and consoles
Quote:
I bought them brand new from Discountvantruck.com Cost me $899.00 for the Seats (an additional $100.00 for the Leather) and another $200.00 for the Retractable Seat Belts (matching) and sub floor assembly to install them. |
Re: bucket seats and consoles
2 Attachment(s)
These are the Chevrolet 2010 PU leather seats I installed in my 70 C10.
Attachment 616263 Attachment 616264 :bowtie: |
Re: bucket seats and consoles
Quote:
Im going to my Pick n Pull tomorrow looking for buddy buckets.. but after seeing those I dont know what Im coming back with. (Like I ever do!!) |
Re: bucket seats and consoles
Thank You.
I removed the factory brackets and mounted the adjustment rails directly to the floor. The front rail sits on the ridge in the floor and the rear rail sits on a ¾ in spacer. This is a 3 piece seat; the center unit uses the original brackets. Good luck on your search! :chevy: |
Re: bucket seats and consoles
2 Attachment(s)
My 70
2001 Silverado power seats |
Re: bucket seats and consoles
1 Attachment(s)
2002 Bonneville seats
|
Re: bucket seats and consoles
Quote:
|
Re: bucket seats and consoles
Quote:
|
Re: bucket seats and consoles
2 Attachment(s)
this is mine in my blazer , but the console will fit in the trucks too
it works for me and kinda looks like it coulda been Attachment 1515552 Attachment 1515553 |
Re: bucket seats and consoles
1 Attachment(s)
|
Re: bucket seats and consoles
I used a set of 99 Tahoe seats with 6 way electric and heat! I bought a 72 console and had it re done. Installed my amps inside it.:chevy:
http://67-72chevytrucks.com/gallery/...8/IMG_3636.JPG http://67-72chevytrucks.com/gallery/...m/IMG_3634.JPG http://67-72chevytrucks.com/gallery/...m/DSCF3369.JPG |
Re: bucket seats and consoles
Not as comfy as the factory buckets, but I like a seat that holds me during a launch...;) ~Ghostrider~ https://s-media-cache-ak0.pinimg.com...c8dba9da2c.jpg
|
Re: bucket seats and consoles
subscribed
|
Re: bucket seats and consoles
3 Attachment(s)
Pic #1. This is a customer's truck during the mock-up stage,they are out of a Dodge Dakota
Pic #2. The seats after they were covered. Pic #3. These are my seats in my 52 chevy they are out of a Grand Prix Mark... |
Re: bucket seats and consoles
subscribed
|
Re: bucket seats and consoles
Quote:
|
Re: bucket seats and consoles
Quote:
The rear two look like OE Suburban with aftermarket houndstooth covers. The front is a buddy bucket (?). I'm not sure if that would have been original to a '69 Suburban. If you look at Hart Rods build thread you'll see he's changed his mind on the seating arrangement. ;) I thought I was the only one going buckets-buckets-bench in an older Suburban. Mine as a slightly different flare to it as I made the middle buckets out of two bench seats. They'll have arm rest like the benches. |
Re: bucket seats and consoles
1 Attachment(s)
My seats came out of some kind of Honda according to PO. The console I built myself and wrapped the dash.
|
Re: bucket seats and consoles
I just finished my interior. I used Corbeau Sports Seats with home made seat frames. The two consoles are custom made using a Chevy Silverado console lid. The shifter is a cable driven B&M Unimatic mounted on a pedestal under the lower console to make it higher.
http://dejavideo.net/truck-interior.jpg |
Re: bucket seats and consoles
Quote:
|
Re: bucket seats and consoles
Expedition.
|
All times are GMT -4. The time now is 11:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com