![]() |
Re: One mixed up 51'
Thanks, yea should throw people for a bit of a loop. I'm gonna try making my own cover when the time comes. Keep the secret best I can except at shows.
Once I get more steel I'll start on the front and this thing should be upside down for final weld up in no time :) |
Re: One mixed up 51'
Interesting build.......
|
Re: One mixed up 51'
Haven't had much time but I got the other strut tower cut out for the strut top.
http://i1310.photobucket.com/albums/...pspd8ypmld.jpg Now that those are tacked up I'm starting on the fronts. http://i1310.photobucket.com/albums/...pskyonpe2t.jpg http://i1310.photobucket.com/albums/...pss5rcfrhq.jpg So far so good I think. Will of course add support to the inside. |
Re: One mixed up 51'
Nice!! Make sure you leave motor access.
|
Re: One mixed up 51'
I'm trying to mimic the supra struts in a way the best I can. I know my motor will fit in one of those. I'm also pushing the motor as far back as I can so that should help with clearence I hope.
|
Re: One mixed up 51'
Went to the fathers days car show this weekend and surprisingly I only saw 1 s10 and only gmc versions of mine!
Didn't get a pic of the dime but did of the 3 gmc's http://i1310.photobucket.com/albums/...ps5nmwvd4m.jpg http://i1310.photobucket.com/albums/...psisvxbtvz.jpg http://i1310.photobucket.com/albums/...ps0yih2zox.jpg Also my dads rarity http://i1310.photobucket.com/albums/...psql0lvtnz.jpg |
Re: One mixed up 51'
Thanks, might put the project on hold for a little bit. Thinking of finally doing the upgrade my shop space so desperatly needs.
My counter space currently consists of a foosball table with patio bar peace's on top and a plastic collapsible table. So I think it's time to finally do it so I can bolt down some tools like a vice and a brake I'm looking at :) So looking at maybe a week to get it done and re organized. |
Re: One mixed up 51'
Pretty much done the new benches. Done on the cheap but heaps better then what I was using before.
BEFORE: http://i1310.photobucket.com/albums/...pswoz3oar2.jpg CLEANED: http://i1310.photobucket.com/albums/...psge4r8uyn.jpg Constructing: http://i1310.photobucket.com/albums/...ps4r59kr7r.jpg DONE: http://i1310.photobucket.com/albums/...ps3waazt6l.jpg Still gotta put everything back, buy a vice to bolt down and got my eyes on a 30" brake as well. Back onto the truck :) |
Re: One mixed up 51'
It's been a bit since I've updated this but things have been busy and the garage Is still not cleaned out. But as I have been walking past the truck and looking over what I've done I have come up with maybe a different, maybe better way to attack this suspension.
What I've done so far is only tacked together and looks pretty industrial (strong at least) but it's a pain to get it just right with the lack of "shop" I have. So the thought I have is to get a donor supra and graft the front clip, witch does have frame rails I can connect to, so the suspension can line up and bolt up a lot easier. Also cutting out the rear floor with strut towers and moulding that on to the back. This is just a thought that's gone threw my mind and thought I'd throw it out here and see what everyone thinks? Should get the garage done this weekend so things will move forward soon. Posted via Mobile Device |
Re: One mixed up 51'
Been a wile since I have had time for the truck but I finally did something today! :)
I've redisigned the towers a bit. Using 6" pipe and 3/16 plate I've put them together. I still need to get the cab back off, but going to make a dolly for it first. Once it's off I'll be able to measure better to get everything perfect. Here's the new strut tower tops I made today. http://i1310.photobucket.com/albums/...pse34urw2u.jpg http://i1310.photobucket.com/albums/...pskyfqtdwc.jpg http://i1310.photobucket.com/albums/...psaj7qqocg.jpg http://i1310.photobucket.com/albums/...psosz4rrkv.jpg http://i1310.photobucket.com/albums/...psf7ebb9b5.jpg http://i1310.photobucket.com/albums/...psxp59fqcq.jpg Considering these will be seen in the bed, these should look much better. Posted via Mobile Device |
Re: One mixed up 51'
Great job. I agree they will look better. I see you have random Canadian tire money floating around your shop as well LOL. It must be a normal thing.
|
Quote:
As for the canadian tire money, you should see my jar lol. Posted via Mobile Device |
Re: One mixed up 51'
Install on the new tops went ok. Had to take them apart and back together to get them to fit right.
http://i1310.photobucket.com/albums/...psqkncxbi2.jpg http://i1310.photobucket.com/albums/...psuxptanfl.jpg http://i1310.photobucket.com/albums/...psszvisez0.jpg http://i1310.photobucket.com/albums/...psql3d02mp.jpg http://i1310.photobucket.com/albums/...ps8mqi943y.jpg http://i1310.photobucket.com/albums/...psnfp2odqa.jpg http://i1310.photobucket.com/albums/...ps3nsic5u3.jpg Bit more time on these to close them up then I might try setting the back on wheels. Posted via Mobile Device |
Re: One mixed up 51'
Started on the front towers today. Only got a little done cuz I had a lot of cleaning to do in there.
Will be taking the cab off next. Here's is where I've stopped on the rears for now. http://i1310.photobucket.com/albums/...psruethss7.jpg Here is the little I've done on the fronts. http://i1310.photobucket.com/albums/...ps2zqtcoyl.jpg Just cut out the peace's to check fitment. After taking off the k member and looking at what's left of the frame I've desided to add a little more structure. http://i1310.photobucket.com/albums/...ps5mtmeprn.jpg http://i1310.photobucket.com/albums/...psodzku3cy.jpg That's as far as I got before I ran out of time. Taking the cab off next to get the fronts done. Wish me luck Posted via Mobile Device |
Re: One mixed up 51'
Good Luck!! Stronger frame is always better. Makes you feel better going down the rd.
|
Re: One mixed up 51'
Nice work, keep the photos coming.
|
Re: One mixed up 51'
Getting an hour here and there to work on the truck.
Had time to the front frame bits into shape and tack them in. http://i1310.photobucket.com/albums/...psvrhyhndl.jpg http://i1310.photobucket.com/albums/...psjesbyntv.jpg It should do the trick once the holes are filled. Couldn't go wider or I might have header clearence problems down the road. Posted via Mobile Device |
Re: One mixed up 51'
Almost got the front frame bits done.
http://i1310.photobucket.com/albums/...psgvbeujz2.jpg And started finishing off the rear towers. http://i1310.photobucket.com/albums/...psj8znsilr.jpg http://i1310.photobucket.com/albums/...ps8edyrcsf.jpg Should have those done next big of time I get on it. Posted via Mobile Device |
Re: One mixed up 51'
Well I pretty much finished the back towrrs today. But then I ran out of wire :(
Still lots of grinding to do tho, and a few gussets for final strength. http://i1310.photobucket.com/albums/...psxsqw9mup.jpg http://i1310.photobucket.com/albums/...psfunevcbk.jpg Now I really need to make that cab dolly damn it! I keep procrastinating on that. Posted via Mobile Device |
Re: One mixed up 51'
They look good and strong. Good job.
|
Re: One mixed up 51'
Thanks, now just gotta get the fronts going. I'm getting really antsy to see this thing on 4 wheels
Posted via Mobile Device |
Re: One mixed up 51'
Well it's been a wile but life has slowed down enuf to let me get back onto the project.
Started the front strut towers today. http://i1310.photobucket.com/albums/...psfy8uz8ag.jpg http://i1310.photobucket.com/albums/...psqf4w6ifs.jpg http://i1310.photobucket.com/albums/...ps2xkiymke.jpg Gonna brace them with 1.5" square tubing and 1/8 plate. I've also finally got a transmission yesterday! But it's not a t56, after it seems like endless searching I found another trans that works behind the lsx. Found it in a review of a lsx swapped 300zx putting 450+hp at the tire with its stock 5 speed trans. There's a company that makes an adapter kit for it called LOJ. Kit goes for about 1k and I picked up the Z32 TT trans yesterday for $200 with low kms. Only down sides to the trans are the shifter position is pretty far back so I'm gonna come up with some kind of relocating exposed linkage. The weak point in the trans in the syncro's but in 98 they fixed them so if I rebuild it with the 98's syncro's it's good to go. http://i1310.photobucket.com/albums/...psfyxiqrry.jpg So just incase this wasn't already an oddball mash of parts here's a few more lol. I also grabbed a gage cluster in hopes of splicing it in as well from a 300zx. http://i1310.photobucket.com/albums/...psbvbnwxph.jpg http://i1310.photobucket.com/albums/...pstypgho7r.jpg Might try either re configuring or just making a sleeve to put it in as is? Well I should have more material this week and maybe order my rims as well. |
Re: One mixed up 51'
Things move slowly again.
Got some steel to finish the towers and to start on mounting the bed. http://i1310.photobucket.com/albums/...psvd6fgmii.jpg They shorted me 2 lengths but I should get them tomorrow or today. Got a bit done on the towers but covered it with all the body to make space for a guys night in the garage so no pics yet. Yesterday tho I did start on making the front of the bed as I plan to bolt the cab to the bed. http://i1310.photobucket.com/albums/...psrrya2p6m.jpg The peace's I got shorted are the ones for the X brace to be done. Pretty much done that just need the bracing and put a few more threads on the side to bolt te box together. |
Re: One mixed up 51'
Thats alot of steel on the back end of the SUPRA suspension.... Is this still gonna be a 1/2 ton truck??? :lol: j/k - looking good!
|
Re: One mixed up 51'
I hear yea, but funny enuf that year supra weighs in at almost the same as the trucks.
|
All times are GMT -4. The time now is 05:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com