Re: here's my truck 65 c20
5 Attachment(s)
And more photos
|
Re: here's my truck 65 c20
2 Attachment(s)
& more photos because i know you all love photos.
|
Re: here's my truck 65 c20
3 Attachment(s)
Got a question for you all, i was hooking up my wire harness and ran into a problem i have more wires to my started than i know what they are for. Can anyone tell me where they all go. Here are more photos of the starter and wire loom. I DONT KNOW WHERE TO PUT THE PURPLE WIRE OR EVEN IF THE OTHERS ARE WIRED RIGHT. ANY HELP????
|
Re: here's my truck 65 c20
1 Attachment(s)
I got this by gooogling it,
the wire from ignition switch for the solenoid goes to the small stud with S by it. almost always purple color on most GM all other wires go to the battery cable stud ( this should have the alt wire running to it also.) if you have old points type ignition then you need to use the other small stud it is labeled R run a small wire from it to the ign coil + stud. if you dont then it will not run because this is the full 12v feed to the points during cranking time only here is a wire harness diagram for you also |
Re: here's my truck 65 c20
Quote:
I'm glad to see more guys sticking with the 3/4 ton and still making it look cool. Great work! |
Re: here's my truck 65 c20
Nice work
|
Re: here's my truck 65 c20
Quote:
|
Re: here's my truck 65 c20
Quote:
|
Re: here's my truck 65 c20
Wow, the engine compartment looks really clean. The fender wells look so clean and perfect. Very nice.
|
Re: here's my truck 65 c20
Quote:
Posted via Mobile Device |
Re: here's my truck 65 c20
looks good Budman...by the way do you have a stock number for the upper rad hose, the current ones we are using `64 to `72 are getting hard to find.[IMG]http://i154.photobucket.com/albums/s...9/DSCF0169.jpg[/IMG]
|
Re: here's my truck 65 c20
So here is what I think might be the build ticket for my truck, until I noticed that the vehicle identification numbers didn't match the ticket says 01546z my truck cab number says 02546z so the question that started all of this. Did my 65 c20 come with a V8 327?. I'm being told that this truck didn't have that option. Can any help with this? My ticket our what I think is my build ticket says the engine is a SV?
Posted via Mobile Device what ifs a SV? Posted via Mobile Device |
Re: here's my truck 65 c20
Quote:
Posted via Mobile Device |
Axle
I love the truck! I wish I could build one one like that one day. I saw in the posts someone ask about the 90 axle being wide. Do the wheels stick out or is the axle about the same width?
|
Re: Axle
Quote:
|
Re: here's my truck 65 c20
5 Attachment(s)
Well while looking through craigs list yesterday i found a new project, i just couldnt pass up. It was almost free, $275.00 with brand new tires, wheels, and a freshly rebuilt steering column. With rust free doors.
|
Re: here's my truck 65 c20
Nice build !!
Did you get the starter wiring ? |
Re: here's my truck 65 c20
Wow! Nice find, budman.
Posted via Mobile Device |
Re: here's my truck 65 c20
Quote:
Posted via Mobile Device |
Re: here's my truck 65 c20
Lookin great :metal:
|
Re: here's my truck 65 c20
Sweet project. My family had a house in Temecula for a while. Do you mind me asking where you got your cab sand blasted and primered and how much it set you back? THanks
|
Re: here's my truck 65 c20
Quote:
Posted via Mobile Device |
Re: here's my truck 65 c20
Glad I asked. Was getting quoted $500-$700. Where did you get it done at?
|
Re: here's my truck 65 c20
Quote:
|
Re: here's my truck 65 c20
Man, I hope I am crazy but it looks like the intake has nowhere to put the oil fill tube and the valve covers do not have breather caps so where the heck do you pour in the oil?
|
All times are GMT -4. The time now is 11:24 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com