![]() |
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
3 Attachment(s)
The front sway bar was the last part to go on. Included with the front sway bar is as set of our PosiLinks. Installation of these parts go back on just like the factory components.
Attachment 1689923 Attachment 1689924 Attachment 1690318 |
Re: Ridetech 4-Link Coil-Over Install
3 Attachment(s)
Here are a few more pictures of the upper and lower coilover mounts installed for you guys. As you can see, this setup is pretty simple AND allows you a little more stroke than the OE configuration.
If there are any specific areas of the truck you would like to see. Feel free to let me know and I will do my best to accommodate your request. Attachment 1690314 Attachment 1690315 Attachment 1690316 |
Re: Ridetech 4-Link Coil-Over Install
The engineering department gave me these sweet CAD drawings to share with you guys. Hopefully this will give you a good idea of the R&D work that goes into the development of a Ridetech kit.
https://ridetech.com//images/detaile...background.jpg https://ridetech.com//images/detaile...-87_rear_4.jpg https://ridetech.com//images/detaile...background.jpg |
Re: Ridetech 4-Link Coil-Over Install
1 Attachment(s)
I have the Air Suspension system from Ridetech for my '79, I absolutely LOVE it.
Here's a pic all aired out. The quality of your systems are absolutely amazing! http://67-72chevytrucks.com/vboard/a...1&d=1505762706 |
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
I just ordered the rear 4 link with coil overs and that new steering brace thingy thats a few pics up.
Bubba |
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
Quote:
Check out the link below periodically as we will be adding product pictures and pricing throughout the week. http://www.ridetech.com/products/sus...1973-1987-c10/ |
Re: Ridetech 4-Link Coil-Over Install
2 Attachment(s)
Great post and pics John. I'm so glad this kit is finally released to the public. I have been waiting almost 2 months to announce "Scarlett gets a spring in her step"
@n2trux has teamed up with RideTech Suspension to showcase the new #ridetech coilover system for 73-87 C10s The all new kit includes front & rear HQ Series coilovers , front upper & lower StrongArms, bolt-on 4 Link, drop spindles and front and optional rear MuscleBar. Follow on Instagram @ridetechsuspension @ridetech_john @ridetech_chase @n2trux |
Re: Ridetech 4-Link Coil-Over Install
on the fence about it, any idea if the upper support bracket for the sway bar will clear with a ricks fuel tank out back?
|
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
I will try and get some pictures and measurements as soon as i can
|
Re: Ridetech 4-Link Coil-Over Install
I personally wouldn't cut it off. As you already know, those trucks flex like a wet noodle from the factory so we designed those components to serve two functions. Not only does that brace allow for a proper mounting point for that sway bar but it also eliminates a lot of the "Squarebody Flex" that constantly plagues these trucks.
For sure, get me some pictures of your current setup and we will see what we can come up with. I am interested in knowing myself. |
Re: Ridetech 4-Link Coil-Over Install
2 Attachment(s)
Finally! I know you guys have been patiently waiting for this! The new wheels and tires were installed this afternoon and I finally have some ride height measurements!
Keep in mind that these measurements may vary with preload, wheel and tire size etc. but this will give you a pretty good idea of where the truck will sit. Front: 255/40R18 with a 4 3/8 inch backspacing, 8 inch wide wheel. Measurement from ground to center of wheel lip: 25 3/4 inches Rear: 275/40R18 with a 5 1/8 inch backspacing, 9.5 inch wide wheel. Measurement from ground to center of wheel lip: 25 inches Attachment 1691947 Attachment 1691946 |
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
stance is good with either set up
|
Re: Ridetech 4-Link Coil-Over Install
Quote:
|
Re: Ridetech 4-Link Coil-Over Install
looking forward to it
|
Re: Ridetech 4-Link Coil-Over Install
Quote:
Bubba You got a PM Joh |
Re: Ridetech 4-Link Coil-Over Install
Got it Bubba!
Give me a shout directly when you get a chance. |
Re: Ridetech 4-Link Coil-Over Install
2 Attachment(s)
Attachment 1692369
Attachment 1692374 Click HERE for a video. The 4-Link is a 100% bolt-on design with minimal cutting and no welding required. C-Notch brackets tie in directly with the upper crossmember, while link bar mounts use factory bolt holes in front along with factory axle pad mounting points. Self-lubricating Delrin bushings offer quiet, reliable operation. For Immediate Release Sept. 22, 2017 Turn your 1973-1987 Chevrolet C10 pickup trucks into a true muscle truck with RideTech’s new coilover suspension kit. The complete system includes everything needed to dramatically improve the handling, ride quality and stance of your “square fender” pickup including an all-new Bolt-In 4-Link Assembly with C-Notch that replaces the factory leaf springs. The complete kit includes the aforementioned Bolt-In 4-Link kit, front StrongArm® control arms, HQ Series single adjustable coilovers, Delrin bushing kit, drop spindles, front upper coilover mounting brackets and a beefy, 1.5” MuscleBar™ sway bar kit. The kit is 100% CAD-engineered in-house and refined on RideTech’s exclusive test track. The heart of every RideTech coilover system is a set of monotube HQ Series coilover shock absorbers with 24 degrees of rebound adjustment to help you dial-in ride quality and fine tune handling characteristics. RideTech offers an exclusive 1,000,001-mile shock absorber warranty. 1973-1987 C10s have an excellent frame design with inherently low rocker height and good strength. RideTech’s new coilover suspension kit takes that great starting point and turns it into a proper muscle truck with high performance handling and sporty stance. You’ll be amazed with the transformation. |
Re: Ridetech 4-Link Coil-Over Install
1 Attachment(s)
Here is a little price breakdown for you guys.
While the front braces are rear sway bars can be added on outside of the kit, all of the components (for the most part) can be purchased individually as you work on your truck. Attachment 1692400 |
Re: Ridetech 4-Link Coil-Over Install
John, will a suburban/blazer gas tank fit behind the sway bar/pan hard bar?
Thanks Rick |
All times are GMT -4. The time now is 10:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com