Re: My first C10 build, can't wait.
Thanks. I left the channel. Pics soon to come.
Posted via Mobile Device |
Re: My first C10 build, can't wait.
2 Attachment(s)
Here are the pictures of the bottom finally all welded up, then seamsealed and undercoated. Im ready to turn this beyatch over now and finish it.
|
Re: My first C10 build, can't wait.
4 Attachment(s)
The first three are some of the cancer that was repaired on the top of the window seal. The last one is of the lower portion of the window seal which i am sure will not be very fun.
|
Re: My first C10 build, can't wait.
2 Attachment(s)
While I am waiting for someone to help me flip the cab over I decided to finally start dismantling the frame to get it ready for all of the Porterbuilt goodies that should be close to arriving.
|
Re: My first C10 build, can't wait.
That looks great! What did you use to make the repair panel? 19g flat? Or is there a place that makes that
Posted via Mobile Device |
Re: My first C10 build, can't wait.
Thanks
I used 16ga metal. To make it I used a cut off wheel, a hammer, a vice, and some vice grips. I know really primitive but after it is welded and ground down, you can't tell. |
Re: My first C10 build, can't wait.
2 Attachment(s)
- I fixed some of the rust that was plaguing the lower part of the window sill.
- I have started to strip the crossmembers from the frame. Man everyone was right those rivets are a pain to remove. - Next step is to have the frame blasted and painted. Found a local shop that will blast, prime and paint the frame for $150. |
Re: My first C10 build, can't wait.
Looks good. I repaired similiar rust on my cab.
|
Re: My first C10 build, can't wait.
Nice looking build, good job on the rust repair
Posted via Mobile Device |
Re: My first C10 build, can't wait.
Thanks guys. Can't wait to get a shipment from Nate. Then the real fun starts.
Posted via Mobile Device |
Re: My first C10 build, can't wait.
3 Attachment(s)
Got a lot done this weekend. I patched some more rust on the firewall and also added the filler plate to round off the passenger side. I will cap it off once I get it back from the blaster and find out where the porterbuilt hinges will mount.
I also stripped the frame, holy crap, that is a pain. Waiting on my tie rod notches so I can weld them in and get ready to send this frame off to the blaster. |
Re: My first C10 build, can't wait.
I got my linkage notches in the mail today, thanks Dave. Now I can weld those in this weekend and have this frame finally blasted and painted.
I am going to work on stripping the paint of the engine next and get it repainted. Any suggestions on how to do so the best way? |
Re: My first C10 build, can't wait.
2 Attachment(s)
I got the linkage notches welded in this weekend. Now I have to get it to the blaster. Hopefully by next week I will have a nice shiny frame.
Debating on painting the frame black or a color, anyone have suggestions? I am thinking of flat red for the outside cover. Here are some frame possibilities I have been thinking. - Black frame with red components - Red frame with silver/grey components - Silver/grey frame with red components |
Re: My first C10 build, can't wait.
I love colored frames. I had a thread about colored frames pro and cons. The issue with colored frames (powder coat) is if there is any kind of dirt, rust, water etc. it will show through. Over time if the coat isnt 110% perfect rust will burn through and it will need to be redone. Paint is another story as you can re coat as you go but is less protective. If its a show only truck you have 0% issue of water getting into any area the coat wasn't perfect.
Posted via Mobile Device |
Re: My first C10 build, can't wait.
Nice progress on the rust repair. Its coming together nicely.
|
Re: My first C10 build, can't wait.
Quote:
Posted via Mobile Device |
Re: My first C10 build, can't wait.
I finally shipped the frame, cab, and various body parts to the sand blaster. I also spent the day stripping and painting engine parts. Once I get the frame back I cant wait to get my Porterbuilt shipment in so I can start bolting parts on. I want a rolling chassis once again.
|
Re: My first C10 build, can't wait.
2 Attachment(s)
Here are a few pictures of this weekend's progress. Once I get the parts back on this engine I will post some of the finished product.
|
Re: My first C10 build, can't wait.
Very clean work on the cab repairs Mike. I know how much work you had to do to get that done. It's funny how a series of pictures makes it look easy. I saw enough of them to make me think the same, till I did my own cab.
It takes a bunch of hours to get it done. Congrats! I like the plans for your chassis too. subscribed. |
Re: My first C10 build, can't wait.
Quote:
|
Re: My first C10 build, can't wait.
Quote:
|
Re: My first C10 build, can't wait.
very cool build....
|
Re: My first C10 build, can't wait.
Thanks guys. More to come after the upcoming weekend.
Posted via Mobile Device |
Re: My first C10 build, can't wait.
I am still waiting on the call from the blaster about the frame and body parts to come in. I painted the engine this weekend. I painted the valve covers, intake, and water pump universal red. Unfortunately this is not red enough, it is too orangey. I am supposed to be getting my paint from Eastwood tomorrow which is pin-up red, which i hope is bright deep red. That should look good against the black frame and engine block.
Talked to Dave at Porterbuilt, he said they are supposed to start working on my parts this week. I hope so. |
Re: My first C10 build, can't wait.
You're making some great headway! Once you get your PB parts you'll have a roller in no time. I'm in the same dilemma as you about what to do about colors for the frame. I'm still unsure as well, I definitely want some color on there somewhere.
Posted via Mobile Device |
All times are GMT -4. The time now is 09:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com