Re: My Drive-way Build - '65 short pants
Quote:
|
Re: My Drive-way Build - '65 short pants
Here's a quick update of my slow build. I don't have pics of all of the progress, so I work on that too. I took the truck down to my buddy's shop and all of the front frame was finally welded up. We also built the trans crossmember and installed the rear notches. Shortly after that, I got called to a job working night. 10 hours, 7 days a week. Needless to say the truck sat during that time. Now that the job is over I'm hopefully going to make some progress on the truck.
Today I notched the upper control arm. Could have came out better, but it should work. http://i41.photobucket.com/albums/e2...503_172927.jpg Here's a pic of when we started on the notches. http://i41.photobucket.com/albums/e2...311_194313.jpg |
Re: My Drive-way Build - '65 short pants
Still not much going on. I placed an order at suicide doors about a month ago and am just waiting on that. Once it comes in I'll be able to finish up all of the suspension out back. During the wait I managed to install these...
trailing arm bushings http://i41.photobucket.com/albums/e2...515_181245.jpg |
Re: My Drive-way Build - '65 short pants
Tackled another project recently. I finally mounted the brake pedal/booster/master on the truck. I followed a guide on here. I can't recall who posted it, but I really liked his approach. So, I copied it for mine. I used captain's adapter with an s10 booster and a 74ish c10 booster. the proportion valve is from the same donor 86 c10 that I got the front suspension from.
Overall I'm pretty pleased with the outcome. I splashed some paint on everything before I put it in too. http://i41.photobucket.com/albums/e2...522_120934.jpg http://i41.photobucket.com/albums/e2...528_152206.jpg Also picked up some tires and threw them on. That way I'll be able to dial the stance in to where I want it when the parts from suicidedoors get here. Here's a pic from yesterday. I managed to push her outside to blow the dust off of her. She's slowly coming along. http://i41.photobucket.com/albums/e2...528_152323.jpg |
Re: My Drive-way Build - '65 short pants
Everything's lookin good!!
|
Re: My Drive-way Build - '65 short pants
nice to see out the garage!!!
|
Re: My Drive-way Build - '65 short pants
Nice progress!!!!
|
Re: My Drive-way Build - '65 short pants
1 Attachment(s)
Awesome you joined the 6 banger brotherhood! :lol: :metal::metal: Here's a picture of mine. Truck is looking sweet! :chevy:
|
Re: My Drive-way Build - '65 short pants
Still waiting on those suspension parts but had an itch to spend a bit of time in the garage. I decided to take another look at that rusted BBW panel that I had and see what I could do with it. Here's a few pics to show what's going on.
Here she is in all of her crusty/holey glory. http://i41.photobucket.com/albums/e2...614_124452.jpg Did some cutting on a chunk of a small window cab. http://i41.photobucket.com/albums/e2...614_124510.jpg New patch cut out. Then laid out where to cut the BBW panel. http://i41.photobucket.com/albums/e2...614_125035.jpg After the cut. http://i41.photobucket.com/albums/e2...614_130326.jpg Clamped and tacking the patch in. http://i41.photobucket.com/albums/e2...614_132524.jpg Here she is all welded in and ground down. http://i41.photobucket.com/albums/e2...614_124528.jpg http://i41.photobucket.com/albums/e2...614_124553.jpg I have both corners in but am going to need another donor piece from a small window cab for the center section. Does anybody have a chuck they'd like to sell? |
Re: My Drive-way Build - '65 short pants
Here it is until I can find a patch for the center.
http://i41.photobucket.com/albums/e2...615_192000.jpg |
Re: My Drive-way Build - '65 short pants
Update...
Doesn't seem like I've gotten much done since the last post. I've been working a good bit since June and only get an hour or two too work on the truck at a time. Plans/goals have changed a bit. I'm really hoping to get the rear suspension all finished up so I can set the bed back on. That way "most" of the truck will be in the same place and out of the weather too. I'll just let the pics bring everything up to date... http://i41.photobucket.com/albums/e2...919_101307.jpg http://i41.photobucket.com/albums/e2...919_101350.jpg http://i41.photobucket.com/albums/e2...919_123911.jpg http://i41.photobucket.com/albums/e2...919_141111.jpg http://i41.photobucket.com/albums/e2...919_141111.jpg |
Re: My Drive-way Build - '65 short pants
|
Re: My Drive-way Build - '65 short pants
Diggin your set up. Nice work, like the welds too.
|
Re: My Drive-way Build - '65 short pants
http://i41.photobucket.com/albums/e2...920_180209.jpg
http://i41.photobucket.com/albums/e2...018_154014.jpg http://i41.photobucket.com/albums/e2...018_154033.jpg That's almost where I'm at now. One side upper bag mount is for the most part done. Soooo... Just need to duplicate it on the other side. Make up a few capping plates and such and then I can burn everything in permanently. |
Re: My Drive-way Build - '65 short pants
Quote:
In my head it should work but time will tell. :lol: |
Re: My Drive-way Build - '65 short pants
Progress! Looks awesome
|
Re: My Drive-way Build - '65 short pants
One baby step at a time. Looks really great!!
|
Re: My Drive-way Build - '65 short pants
Nice progress!
|
Re: My Drive-way Build - '65 short pants
Very nice work. Are you planning to match the rockers with the rest of the paint and keep it patina or repaint the whole truck?
|
Re: My Drive-way Build - '65 short pants
Quote:
|
Re: My Drive-way Build - '65 short pants
Everything looks really good and well planned!
|
Re: My Drive-way Build - '65 short pants
subscribed!..coming along nice man cool truck!
|
Re: My Drive-way Build - '65 short pants
Not much of an update but I managed to make an adapter for my clifford intake for the 292.
http://i41.photobucket.com/albums/e2...117_203839.jpg Also getting a bit of work done fitting the inner fenders. They have to be clearanced for the raised crossmember/suspension and steering box. Then it's on to finishing up all of the brake lines. |
Re: My Drive-way Build - '65 short pants
Progress is progress. Love your truck and the way you're making all the parts for the suspension and not going the kit route. Did the same thing on my '66 Lincoln. Subscribed for inspiration when the day comes I finally get my own C-10.
|
Re: My Drive-way Build - '65 short pants
Quote:
|
All times are GMT -4. The time now is 12:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com