Re: Power Steering Adapter Plates
 

Great thank you

Re: Power Steering Adapter Plates
 

I received the part today, looks great! Thank you for the fast shipping.

Re: Power Steering Adapter Plates
 

Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.

Re: Power Steering Adapter Plates
 

PM sent

Re: Power Steering Adapter Plates
 

Thanks again, some information for 67 K10 owners. I used the original upper rear hole in the frame, then lined up my box and steering shaft. Scribed where the adaptor was, then marked and drilled the holes. Worked out great.

Re: Power Steering Adapter Plates
 

Received the parts today. They look great as usual. Thank you so much.

Re: Power Steering Adapter Plates
 

Thank you for the compliment :)

Re: Power Steering Adapter Plates
 

I need a power steering adaptor plate let me know what I need to do thanks

Re: Power Steering Adapter Plates
 

I will send you a PM with ordering and payment info.

Re: Power Steering Adapter Plates
 

I installed my gearbox and plate months ago but I'm just now hooking up the pitman arm and the center link. My pitman arm is too long for the 1978 PS gearbox I'm using. What did I miss in the instructions that I no longer have? Which pitman arm was I suppose to use? The center link won't clear the engine cradle.
Thanks.....

Re: Power Steering Adapter Plates
 

You should be using the 1978 C10 pitman arm. Are you sure it is installed all the way onto the sector shaft? Did you install the adapter plate according to the instructions and use the supplied template?

Re: Power Steering Adapter Plates
 

Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.

Re: Power Steering Adapter Plates
 

While the K series steering box will bolt up, the sector shaft is different and will not accept a C series pitman arm.

Re: Power Steering Adapter Plates
 

Hi Captain.

I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks

Re: Power Steering Adapter Plates
 

You must use the pitman arm that is for the particular power steering box that you are using. You can NOT use the pitman arm from your original manual steering box.

The rag joint always bolts directly to the steering box input shaft. That is unless for some reason you are eliminating the rag joint all together and using a universal joint.

I will send you a PM with ordering and payment info.

Re: Power Steering Adapter Plates
 

Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !!

Re: Power Steering Adapter Plates
 

Yes you can use a collapsible intermediate shaft. I will send you a PM with ordering info.

Re: Power Steering Adapter Plates
 

Payment and shipping info sent through paypal - Thanks !!

Re: Power Steering Adapter Plates
 

Payment received. I will ship your order on Tuesday since Monday is Veterans Day.

Re: Power Steering Adapter Plates
 

Parts received - Thanks !

Re: Power Steering Adapter Plates
 

Thank you for the purchase :D

Re: Power Steering Adapter Plates
 

Jon,

I need a an adapter to convert my 65 c10 to power please send me pm with details on how to order, thanks!

Re: Power Steering Adapter Plates
 

I replied to the email you sent me this morning. Did you not receive it?

Re: Power Steering Adapter Plates
 

Due to an increase in the cost of the laser cutting, I have had to increase the cost of the steering box adapter plates.

Re: Power Steering Adapter Plates
 

PM sent