Re: 67 (Crew Cab) C30
5 Attachment(s)
A little more progress.
The Person that normally does my sand blasting is Booked Up. So that leaves it to ( You know who):lol: Attachment 1920346 Attachment 1920347 Attachment 1920348 It was close to sunset on the next 2 Pictures. Better than No Pics??? Attachment 1920349 Attachment 1920350 . |
Re: 67 (Crew Cab) C30
3 Attachment(s)
My Hired help seems to be on Vaca-tion :lol:
Attachment 1920355 Attachment 1920356 Here is a picture of under the dash after sandblasting and primer. . |
Re: 67 (Crew Cab) C30
1 Attachment(s)
|
Re: 67 (Crew Cab) C30
2 Attachment(s)
|
Re: 67 (Crew Cab) C30
3 Attachment(s)
Got the front part of the (top)roof skin removed.
I was a little rusty at the seam. Attachment 1939046 Attachment 1939047 Attachment 1939048 . |
Re: 67 (Crew Cab) C30
4 Attachment(s)
There was (mouse nest) insulation all across the front on the roof seam.
At first I though mice? It was neatly placed all the way across the front channel. So this is what the factory done to hold the cab light wire in place and protect it. Because some of it was still bonded to the wiring harness. Attachment 1939053 Driver's side sunvisor reinforcement plate and hole for routing cab light harness. Attachment 1939054 Pass. side sunvisor reinforcement is there so A visor could be added. Because this truck didn't come out with one. This is the last terminal on the cab light harness. Attachment 1939055 Here's a picture of the Insulation from pass side view. Attachment 1939056 . |
Re: 67 (Crew Cab) C30
5 Attachment(s)
I have got a little more done.
I will catch up with my pictures & progress. I am cleaning up from when I cut the roof off. Attachment 1942006 Drivers side B-Pillar Attachment 1942007 Top view inside dome light. Attachment 1942008 I am removing the excess piece by piece to keep my back panel in the best condition. Attachment 1942009 Attachment 1942010 . |
Re: 67 (Crew Cab) C30
4 Attachment(s)
.
I used a grinder and a home made chisel and took my time to remove the spot welds of the excess of where I cut the roof panel out. Attachment 1942020 Attachment 1942021 Attachment 1942022 . |
Re: 67 (Crew Cab) C30
3 Attachment(s)
Pass. side clean up of roof removal
Attachment 1942317 Center Attachment 1942318 Driver's Side Attachment 1942319 . |
Re: 67 (Crew Cab) C30
2 Attachment(s)
Here is a small update.
After splitting (di-sec-ting) the cab Got the cab sand blasted. Then primed. Attachment 1950587 Attachment 1950588 More pictures soon. . . |
Re: 67 (Crew Cab) C30
3 Attachment(s)
A few more pictures.
Fresh out of the sand blast place. Back of the cab Attachment 1951081 Right side (under the dash) Attachment 1951082 Left side (under the dash) Attachment 1951083 . |
Re: 67 (Crew Cab) C30
3 Attachment(s)
Got it Primed
Left side (back of cab) Attachment 1951090 Ride side (back of cab) Attachment 1951091 Top view from Drivers side Attachment 1951092 . |
Re: 67 (Crew Cab) C30
Good progress, building it right
|
Re: 67 (Crew Cab) C30
Quote:
My next step is a (Frame) jig for the floor-pans. I need to drill holes in that frame then level it. . |
Re: 67 (Crew Cab) C30
Are you meaning make a jig to put your body mounts on the frame?
Quote:
|
Re: 67 (Crew Cab) C30
Quote:
I am in the process of making a Platform for the cab. When I complete it I will take Pictures. This platform is to build the cab. I am making this platform using 8" I beam for my base. I will have stands for the different measurements with the floor-pan braces that it will take to make the differences in the mounting points in my Floor-pan. This is how I will transfer the floor-pan to my frame and cab mount locations. . |
Re: 67 (Crew Cab) C30
3 Attachment(s)
Small update.
My helping hand is getting a little sassy. Attachment 1955200 Got some work done on the platform. This is the frame I will build my cab on. Attachment 1955202 I leveled and welded the 2 I-Beams. Check Both I-Beams for square in X & Y & Z. Attachment 1955203 . |
Re: 67 (Crew Cab) C30
That’s one hell of a platform! I like it. You could also use it to do any frame work needed.
|
Re: 67 (Crew Cab) C30
Quote:
I hope to get some more work done to the frame today. . |
Re: 67 (Crew Cab) C30
5 Attachment(s)
Added Trailer hitch to my Platform.
This will be used to build the cab. My helper is asleep at the wheel :lol: Attachment 1959121 Welding the hitch on the trailer 1Attachment 1959122 2Attachment 1959123 3Attachment 1959124 Finished and Now My Helper is Awake:lol: I will get picture's of this frame in the day-light later on. Attachment 1959127 She must be a Night - Shift dog ;) . |
Re: 67 (Crew Cab) C30
4 Attachment(s)
Update.
. |
Re: 67 (Crew Cab) C30
1 Attachment(s)
|
Re: 67 (Crew Cab) C30
5 Attachment(s)
Progress report.;)
After All the Holiday party's :waah: I am Glad to spend time with the family :metal: I just wish they liked Trucks like I do.:lol: I cut Circle's out of a sheet of steel I welded those to the top and bottom of a piece of pipe to make some stands for leveling the floor pan. Attachment 1971163 Attachment 1971164 I didn't take a Picture of the pipe before I started cutting:uhmk: This pipe that I used was the pipe that was my basketball pole when I was young. Yea I saved it that long.:lol: Attachment 1971165 Attachment 1971166 I turned these on the lathe. Then put them on the mill to get them close to size. Attachment 1971167 I then had them Precision ground to the (height) +/- frame mounts / jig frame. These are the test fixtures.:ito: These will be used on my platform. . |
Re: 67 (Crew Cab) C30
4 Attachment(s)
Then the Next step is the :sumo:
Solid stands I have machined in the 3rd and 4th picture. I will get the floor-pans leveled with the pipe stands in the 1st and 2nd picture below. Then I will know the Difference between the front and Rear stand measurements. Attachment 1971191 Attachment 1971192 These (solid) stands in the pictures below are on stand -By for now:lol: Once I get the floor-pans level. I will know the measurement to grind these stands in the pictures below. Attachment 1971194 Attachment 1971195 . . |
Re: 67 (Crew Cab) C30
Wow, impressive! How much does your helper get paid per hour?
|
All times are GMT -4. The time now is 08:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com